Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013, Article ID 413587, 8 pages
http://dx.doi.org/10.1155/2013/413587
Research Article

Turbine Rotor Disk Health Monitoring Assessment Based on Sensor Technology and Spin Tests Data

NASA Glenn Research Center, Cleveland, OH 44135, USA

Received 15 April 2013; Accepted 14 May 2013

Academic Editors: P.-C. Chen and M. Curioni

Copyright © 2013 Ali Abdul-Aziz and Mark Woike. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Abdul-Aziz, M. R. Woike, J. D. Lekki, and G. Y. Baaklini, “Development of a flaw detection/health monitoring scheme for turbine engine rotating components,” in presented at the AIAA Infotech at Aerospace, AIAA 2010-3329, Atlanta, Ga, USA, April 2010. View at Scopus
  2. A. Abdul-Aziz, M. R. Woike, G. Abumeri, J. D. Lekki, and G. Y. Baakilini, “NDE using sensor based approach to propulsion health monitoring of a turbine engine disk,” in Health Monitoring of Structural and Biological Systems, vol. 7295 of Proceeding SPIE, San Diego, Calif, USA, March 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. U. S. Department of Transportation and Federal Aviation Administration, Engine Damage-Related Propulsion System Malfunctions, DOT/FAA/AR-08/24, 2008.
  4. M. Woike, A. Abdul-Aziz, and T. Bencic, A Microwave Blade Tip Clearance Sensor for Propulsion Health Monitoring, NASA/TM-2010-216736, AIAA-2010-3308, 2010.
  5. M. Woike, J. Roeder, C. Hughes, and T. Bencic, Testing of a Microwave Blade Tip Clearance Sensor at the NASA Glenn Research Center, NASA/TM-2009-215589, AIAA-2009-1452, 2009.
  6. A. Abdul-Aziz, M. Woike, J. Lekki, and G. Y. Baaklini, Health Monitoring of a Rotating Disk Using A Combined Analytical-Experimental Approach, NASA Technical Memorandum, NASA/TM-2009-215675, 2009.
  7. T. A. Holst, T. R. Kurfess, S. A. Billington, J. L. Geisheimer, and J. L. Littles, Development of an Optical-Electromagnetic Model of a Microwave Blade Tip Sensor, AIAA-2005-4377, 2005.
  8. J. L. Geisheimer, S. A. Billington, T. Holst, and D. W. Burgess, Performance Testing of a Microwave Tip Clearance Sensor, AIAA-2005-3987, 2005.
  9. J. L. Geisheimer, S. A. Billington, and D. W. Burgess, A Microwave Blade Tip Clearance Sensor for Active Clearance Control Applications, AIAA-2004-3720, 2004.
  10. T. A. Holst, Analysis of spatial filtering in phase-based microwave measurements of turbine blade tips [M.S. thesis], Georgia Institute of Technology, Atlanta, Ga, USA, 2005.
  11. A. L. Gyekenyesi, J. T. Sawicki, and W. C. Haase, “Modeling disk cracks in rotors by utilizing speed dependent eccentricity,” Journal of Materials Engineering and Performance, vol. 19, no. 2, pp. 207–212, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. U. S. Department of Transportation, Federal Aviation Administration, and Office of Aviation Research, Turbine Engine Fan Disk Crack Detection Test, DOT/FAA-AIAR-04/28, Washington, DC, USA, 2004.
  13. W. C. Hass and M. J. Drumm, “Detection, discrimination and real-time tracking of cracks in rotating disks,” in IEEE Aerospace Conference, Big sky, March 2002.
  14. M. Drumm and C. W. Haase, High Performance Rotor Health Monitoring, Exsell Instruments, Acton, Mass, USA, 2000.
  15. W. C. Hasse, “High performance rotor health monitoring,” in Proceedings the SAE Conference on Engine Condition Monitoring, Montreal, Canada, October 1999.
  16. W. C. Hasse and M. J. Drumm, “Detection, discrimination and real-time tracking of cracks in rotating disks,” in Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-9 '02), Honolulu, Hawaii, USA, February 2002.
  17. A. S. Sekhar and B. S. Prabhu, “Condition monitoring of cracked rotors through transient response,” Mechanism and Machine Theory, vol. 33, no. 8, pp. 1167–1175, 1998. View at Google Scholar · View at Scopus
  18. D. E. Bentlty, “Detecting cracked shafts at earlier levels,” Orbit Magazine, Bently Nevada, vol. 3, no. 2, 1982. View at Google Scholar
  19. J. Wauer, “On the dynamics of cracked rotors: a literature survey,” Applied Mechanics Review, vol. 43, no. 1, pp. 13–17, 1990. View at Google Scholar
  20. A. K. Koul and R. V. Dainty, “Fatigue fracture of aircraft engine compressor disks,” in Rotating Equipment, Handbook of Case Histories in Failure Analysis, vol. 1, pp. 241–250, 2002. View at Google Scholar