Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013, Article ID 468542, 10 pages
http://dx.doi.org/10.1155/2013/468542
Research Article

Enhancing the Dyeability of Polypropylene Fibers by Melt Blending with Polyethylene Terephthalate

1Department of Polymer Engineering and Color Technology, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran, Iran
2Centre of Excellence for Color Science and Technology, Institute for Color Science and Technology, P.O. Box 16765-654, Tehran, Iran
3Department of Color Physics, Institute for Color Science and Technology, P.O. Box 16765-654, Iran

Received 27 August 2013; Accepted 18 September 2013

Academic Editors: M. Banerjee and H. Gao

Copyright © 2013 Fereshteh Mirjalili et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Maryam Ataeefard, Majid Mohseni, and Siamak Moradian, “Polypropylene/clay nanocomposite: kinetic and thermodynamic of dyeing with various disperse dyes,” The Journal of The Textile Institute, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • Abosaeed Rashidi, Mohammad Esmail Yazdanshenas, Ahmad Bigdeli, and Hossein Nazockdast, “Relationship between dye sorption and morphology in polypropylene/poly (butylene terephthalate) microfibrillar blend nanocomposite fibers,” Journal of the Textile Institute, vol. 107, no. 6, pp. 774–783, 2016. View at Publisher · View at Google Scholar
  • Maja Kuzmanović, Laurens Delva, Ludwig Cardon, and Kim Ragaert, “The effect of injection molding temperature on the morphology and mechanical properties of PP/PET blends and microfibrillar composites,” Polymers, vol. 8, no. 10, 2016. View at Publisher · View at Google Scholar
  • Emre Tekay, Serap Başkır, Nihan Nugay, Turgut Nugay, Bülend Ortaç, and Sinan Şen, “ Property enhancement in polypropylene ternary blend nanocomposites via a novel poly(ethylene oxide)-grafted polystyrene- block -poly(ethylene/butylene)- block -polystyrene toughener-compatibilizer system ,” Polymer International, 2018. View at Publisher · View at Google Scholar
  • Tânia V. Pinto, Diana M. Fernandes, Alexandra Guedes, Carla Silva, Clara Pereira, and Cristina Freire, “Photochromic polypropylene fibers based on UV-responsive silica@phosphomolybdate nanoparticles through melt spinning technology,” Chemical Engineering Journal, 2018. View at Publisher · View at Google Scholar