Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013, Article ID 560694, 12 pages
http://dx.doi.org/10.1155/2013/560694
Research Article

Energy-Saving Analysis of Hydraulic Hybrid Excavator Based on Common Pressure Rail

1School of Mechatronics Engineering, Harbin Institute of Technology, Harbin 150080, China
2College of Automation, Harbin Engineering University, Harbin 150001, China
3Faculty of Technology and Science, University of Agder, 4898 Grimstad, Norway

Received 3 July 2013; Accepted 25 August 2013

Academic Editors: C.-M. Kao, M.-H. Shih, W.-P. Sung, and D. Tsang

Copyright © 2013 Wei Shen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Yang, L. Quan, and Y. Yang, “Excavator energy-saving efficiency based on diesel engine cylinder deactivation technology,” Chinese Journal of Mechanical Engineering, vol. 25, no. 5, pp. 897–904, 2012. View at Google Scholar
  2. P. W. Griffin, G. P. Hammond, K. R. Ng, and J. B. Norman, “Impact review of past UK public industrial energy efficiency RD&D programmes,” Energy Conversion and Management, vol. 60, no. 8, pp. 243–250, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Kim, J. Choi, and K. Yi, “Development of supervisory control strategy for optimized fuel consumption of the compound hybrid excavator,” Journal of Automobile Engineering, vol. 226, no. 12, pp. 1652–1666, 2012. View at Google Scholar
  4. T. Lin, Q. Wang, B. Hu, and W. Gong, “Development of hybrid powered hydraulic construction machinery,” Automation in Construction, vol. 19, no. 1, pp. 11–19, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Lin, S. Jiao, X. Wang, and J. Li, “Fuzzy adaptive energy-saving technology for static hydraulic grader,” in Proceedings of the International Conference on Mechatronic Science, Electric Engineering and Computer (MEC '11), pp. 109–113, Jilin, China, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Han, M. Liu, and X. Cao, “Research of electronic energy saving control technology in construction machinery,” Advanced Materials Research, vol. 443-444, pp. 272–276, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Cetinkunt, U. Pinsopon, C. Chen, A. Egelja, and S. Anwar, “Positive flow control of closed-center electrohydraulic implement-by-wire systems for mobile equipment applications,” Mechatronics, vol. 14, no. 4, pp. 403–420, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Fang, “Analysis and computing of load sensing system in hydraulic excavator,” Journal of Tongji University, vol. 29, no. 9, pp. 1097–1100, 2001. View at Google Scholar
  9. I. Y. Jong, K. K. Ahn, and Q. T. Dinh, “A study on an energy saving electro-hydraulic excavator,” in Proceedings of the International Joint Conference on Control, Automation and Systems and Annual Conference of the Society of Instrument and Control Engineers (ICCAS-SICE '09), pp. 3825–3830, Fukuoka, Japan, August 2009. View at Scopus
  10. R. Finzel, S. Helduser, and D. S. Jang, “Electro-hydraulic control systems for mobile machinery with low energy consumption,” in Proceedings of the 7th International Conference on Fluid Power Transmission and Control, pp. 214–219, 2009.
  11. T. Wakui, N. Wada, and R. Yokoyama, “Feasibility study on combined use of residential SOFC cogeneration system and plug-in hybrid electric vehicle from energy-saving viewpoint,” Energy Conversion and Management, vol. 60, no. 8, pp. 170–179, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Fisher, J. Jostins, S. Hilmansen, and K. Kendall, “Electronic integration of fuel cell and battery system in novel hybrid vehicle,” Journal of Power Sources, vol. 220, pp. 114–121, 2012. View at Google Scholar
  13. T. Katrašnik, “Energy conversion phenomena in plug-in hybrid-electric vehicles,” Energy Conversion and Management, vol. 52, no. 7, pp. 2637–2650, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. Q. Xiao, Q. Wang, and Y. Zhang, “Control strategies of power system in hybrid hydraulic excavator,” Automation in Construction, vol. 17, no. 4, pp. 361–367, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Lee, N. Kim, H. Seo, S. W. Cha, and W. Lim, “Fuel consumption analysis of hybrid excavator using electric swing motor,” in Proceedings of the 24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition, vol. 2, pp. 879–886, 2009.
  16. M. Kagoshima, T. Sora, and M. Komiyama, “Development of hybrid power train control system for excavator,” in Proceedings of the Society of Automotive Engineers of Japan Annual Congress, vol. 86, pp. 1–6, 2003.
  17. A. Tsutsui, T. Nanjyo, and T. Yoshimatsu, “Development of the electro hydraulic actuator system on hybrid excavator,” in Proceedings of the Society of Automotive Engineers of Japan Annual Congress, vol. 86, pp. 7–12, 2003.
  18. Komatsu Company, “PC200-8 hybrid hydraulic excavator contributes to reducing CO2 emissions,” Komatsu Corporate Profile, vol. 3, pp. 4–5, 2008. View at Google Scholar
  19. “Komatsu launches world's first hybrid excavator,” Down to Earth, vol. 7, no. 48, article 23, 2008.
  20. Hitachi Construction Machinery, “Dvelopment of battery driven construction machinery for CO2 reduction,” Tech. Rep., Development of Technical Measure for Global Warming Control, 2005. View at Google Scholar
  21. M. Kagoshima, M. Komiyama, T. Nanjo, and A. Tsutsui, “Development of new kind of hybrid excavator,” Kobelco Technology Review, vol. 27, pp. 39–42, 2007. View at Google Scholar
  22. W. Shen and J.-H. Jiang, “Analysis of energy recovery efficiency of hydraulic hybrid excavator,” Journal of South China University of Technology, vol. 40, no. 1, pp. 82–87, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Sgro, M. Inderelst, and H. Murrenhoff, “Energy efficiency of mobile working machines,” in Proceedings of the 7th International Fluid Power Conference, 2010.
  24. K. K. Ahn, H. O. TH, and Q. T. Dinh, “A study on energy saving potential of hydraulic on energy saving potential of hydraulic control system using switching type closed loop constant pressure system,” in Proceedings of the 7th JFPS International Symposium on Fluid Power, pp. 317–322, Toyama, Japan, September 2008.
  25. R. A. H. Malsen, P. A. J. Achten, and G. E. M. Vael, “Design of dynamic and efficient hydraulic systems around a simple hydraulic grid,” SAE Paper 2002-01-1432, 2002. View at Google Scholar
  26. J. Jiang, A. Yu, and W. Shen, “The review of full hydraulic hybrid excavator based on common pressure rail network,” Chinese Hydraulics and Pneumatics, vol. 9, pp. 44–49, 2010. View at Google Scholar
  27. W. Shen and J. Jiang, “Analysis and development of the hydraulic secondary regulation system based on the CPR,” in Proceedings of the International Conference on Fluid Power and Mechatronics (FPM '11), pp. 117–122, Beijing, China, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. P. A. J. Achten, G. E. M. Vael, and F. Zhao, “The Innas hydraulic transformer—the key to the hydrostatic Common Pressure Rail,” SAE Paper 2000-01-2561, 2000. View at Google Scholar
  29. P. A. J. Achten, F. Zhao, and G. E. M. Vael, “Transforming future hydraulics: a new design of a hydraulic transformer,” in Proceedings of the 5th Scandinavian International Conference on Fluid Power, 1997.
  30. C.-Q. Liu and J.-H. Jiang, “Flow characteristic of inclined plate and axial plunger type hydraulic transformer,” Journal of Jilin University, vol. 42, no. 1, pp. 85–90, 2012. View at Google Scholar · View at Scopus
  31. H. Lu, Theoretical analysis and experiment of electric control bent axial piston hydraulic transformer [Ph.D. thesis], Harbin Institute of Technology Press, 2008.
  32. J. Zimmerman, R. Hippalgaonkar, and M. Ivantysynova, “Optimal control for the series-paralleld displacement controlled hydraulic hybrid excavator,” in Proceedings of the ASME Dynamic Systems and Control Conference, pp. 1–8, 2011.
  33. W. Shen, J. Jiang, and K. Wang, “Dynamic analysis of boom system based on hydraulic transformer,” Transactions of the Chinese Society for Agricultural Machinery, no. 4, pp. 27–32, 2013. View at Google Scholar
  34. J. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill, 1988.
  35. C. Williamson, Power management for multi-actuator mobile machines with displacement controlled hydraulic actuators [dissertations], Purdue University, 2010.
  36. J. Zimmerman and M. Ivantysynova, “The effect of system pressure level on the energy consumption of displacement controlled actuator systems,” in Proceedings of the 5th Initiative of Fluid Power Net International (FPNI-PhD '08), pp. 77–92, 2008.