Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2013 (2013), Article ID 845916, 7 pages
http://dx.doi.org/10.1155/2013/845916
Research Article

Investigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering

Friedrich-Alexander-Universität Erlangen-Nürnberg, Institute of Polymer Technology, Am Weichselgarten 9 Tennenlohe, 91054 Erlangen, Germany

Received 24 April 2013; Accepted 2 July 2013

Academic Editors: A. T. Marques and A. I. Martinez

Copyright © 2013 Steve Meister and Dietmar Drummer. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • Steve Meister, and Dietmar Drummer, “Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering,” Advances in Mechanical Engineering, 2013. View at Publisher · View at Google Scholar
  • Quanliang Su, Nan Zhang, and Michael D Gilchrist, “The use of variotherm systems for microinjection molding,” Journal of Applied Polymer Science, 2015. View at Publisher · View at Google Scholar
  • Steve Meister, Andreas Seefried, and Dietmar Drummer, “Replication quality of micro structures in injection moulded thin wall parts using rapid tooling moulds,” Microsystem Technologies-Micro-And Nanosystems-Information Storage And Processing Systems, vol. 22, no. 4, pp. 687–698, 2016. View at Publisher · View at Google Scholar
  • Christopher Fischer, Steve Meister, and Dietmar Drummer, “Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics,” Zeitschrift Kunststofftechnik/Journal of Plastics Technology, vol. 2017, no. 4, pp. 212–232, 2017. View at Publisher · View at Google Scholar