Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 138254, 6 pages
Research Article

Design of Heat Exchanger for Ericsson-Brayton Piston Engine

University of Zilina, Univerzitná 8215/1, 010 26 Zilina, Slovakia

Received 28 February 2014; Accepted 2 April 2014; Published 28 May 2014

Academic Editors: N. Barsoum, V. N. Dieu, P. Vasant, and G.-W. Weber

Copyright © 2014 Peter Durcansky et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Creyx, Energetic Optimization of the Performances of a Hot Air Engine for Micro-CHP Systems Working with a Joule or an Ericsson Cycle, Elsevier, Paris, France, 2012.
  2. J. Kalčík and K. Sýkora, Technická Termodynamika, Academia Praha, Prague, Czech Republic, 1973.
  3. S. Bonnet, M. Alaphilippe, and P. Stouffs, Energy, Exergy and Cost Analysis of a Micro-CogenerAtion System Based on an Ericsson Engine, Elsevier, Paris, France, 2011.
  4. P. Ďurčanský, J. Jandačka, A. Kapjor, and Š. Papučík, “Návrh výmenníka tepla pre Ericsson-Braytonov motor,” in SKMTaT, K. Kaduchova, Ed., pp. 21–25, 2013. View at Google Scholar
  5. P. Nemec and J. Huzvar, Proposal of Heat Exchanger in Micro Cogeneration Unit, Configuration with Biomass Combustion, Materials Science and Technology, Žilina, Slovakia, 2011.
  6. P. Stehlík, Tepelné Pochody, Výpočet Výmenníku Tepla, VUT Brno, Brno, Czech Republic, 1991.
  7. Verein Deutscher Ingenieure, VDI Heat Atlas, Springer, Berlin, Germany, 2010.
  8. R. Lenhard and M. Malcho, “Numerical simulation device for the transport of geothermal heat with forced circulation of media,” Mathematical and Computer Modelling, vol. 57, no. 1-2, pp. 111–125, 2013. View at Google Scholar