Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 178020, 7 pages
http://dx.doi.org/10.1155/2014/178020
Research Article

Application of Acoustic Emission on the Characterization of Fracture in Textile Reinforced Cement Laminates

Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, Pleinlaan 2, 1050 Brussels, Belgium

Received 3 November 2013; Accepted 19 December 2013; Published 30 January 2014

Academic Editors: F. Ayuga and G. Turk

Copyright © 2014 J. Blom et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. U. Grosse and M. Ohtsu, Acoustic Emission Testing, Springer, Heidelberg, Germany, 2008.
  2. M. Ozawa, S. Uchida, T. Kamada, and H. Morimoto, “Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission,” Construction and Building Materials, vol. 37, pp. 621–628, 2012. View at Publisher · View at Google Scholar
  3. A. Farhidzadeh, S. Salamone, B. Luna, and A. Whittaker, “Acoustic emission monitoring of a reinforced concrete shear wall by b-value-based outlier analysis,” Structural Health Monitoring, vol. 12, no. 1, pp. 3–13, 2013. View at Publisher · View at Google Scholar
  4. S. Shahidan, R. Pulin, N. M. Bunnori, and K. M. Holford, “Damage classification in reinforced concrete beam by acoustic emission signal analysis,” Construction and Building Materials, vol. 45, pp. 78–86, 2013. View at Publisher · View at Google Scholar
  5. A. Carpinteri, M. Corrado, and G. Lacidogna, “Heterogeneous materials in compression: correlations between absorbed, released and acoustic emission energies,” Engineering Failure Analysis, vol. 33, pp. 236–250, 2013. View at Publisher · View at Google Scholar
  6. M. Ohtsu, “Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete: test method for classification of active cracks in concrete structures by acoustic emission,” Materials and Structures, vol. 43, no. 9, pp. 1187–1189, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. W. Brameshuber, “Textile reinforced concrete state of the art report of RILEM technical committee,” Tech. Rep. TC 201-TRC, Rilem, Aachen, Germany, 2006. View at Google Scholar
  8. X. Wu and J. Gu, “Inorganic resin compositions, their preparation and use thereof,” PCT Patent Application WO 97/19033, EP 0 861 216 B1 (MEMC-TW-VUB), Department Research & Development, Vrije Universiteit Brussel, Brussel, Belgium.
  9. J. Aveston, G. A. Cooper, and A. Kelly, “Single and multiple fracture,” in Proceedings of the Conference on the Properties of Fibre Composites, pp. 15–26, National Physical Laboratory, IPC Science & Technology Press, London, UK, 1971.
  10. Dassault Systèmes, Abaqus Analysis User's Manual Version 6.10, 2010.
  11. Marlow, Abaqus Analysis User's Manual Volume III, 2010.
  12. J. Blom, H. Cuypers, P. van Itterbeeck, and J. Wastiels, “Modelling the behaviour of textile reinforced cementitious composites under bending,” in Proceedings of the 4th International Conference on Fibre Concrete, pp. 205–210, Prague, Czech Republic, 2007.
  13. E. Velazquez and J. B. Kosmatka, “Stresses in half elliptic curved beams subjected to transverse tip force,” Journal of Applied Mechanics, vol. 80, no. 1, 7 pages, 2013. View at Publisher · View at Google Scholar
  14. K. G. Dassios, D. G. Aggelis, E. Z. Kordatos, and T. E. Matikas, “Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state,” Composites A, vol. 44, pp. 105–113, 2013. View at Publisher · View at Google Scholar
  15. D. G. Aggelis, D. V. Soulioti, E. A. Gatselou, N.-M. Barkoula, and T. E. Matikas, “Monitoring of the mechanical behavior of concrete with chemically treated steel fibers by acoustic emission,” Construction and Building Materials, vol. 48, pp. 1255–1260, 2013. View at Publisher · View at Google Scholar
  16. D. G. Aggelis, N.-M. Barkoula, T. E. Matikas, and A. S. Paipetis, “Acoustic structural health monitoring of composite materials : damage identification and evaluation in cross ply laminates using acoustic emission and ultrasonics,” Composites Science and Technology, vol. 72, no. 10, pp. 1127–1133, 2012. View at Publisher · View at Google Scholar · View at Scopus