Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 214612, 21 pages
http://dx.doi.org/10.1155/2014/214612
Review Article

A Review on Using Crumb Rubber in Reinforcement of Asphalt Pavement

Center for Transportation Research, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 28 August 2013; Accepted 22 October 2013; Published 30 January 2014

Academic Editors: T. H. D. Flores-Sahagun and Q. Ma

Copyright © 2014 Nuha Salim Mashaan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. J. F. Peralta, Study of the interaction between bitumen and rubber [M.S. thesis], Faculty of Engineering, University of Minho, 2009.
  2. A. Mahrez, Properties of rubberised bitumen binder and its effect on the bituminous mix [M.S. thesis], Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia, 1999.
  3. N. S. Mashaan, The effect of crumb rubber modifier to the properties and rheological behaviour of asphalt binder [M.S. thesis], University of Malaya, Kuala Lumpur, Malaysia, 2012.
  4. R. Richard and T. Bent, Road Engineering for Development, Spon Press, London, UK, 2nd edition, 2004.
  5. H. J. E. Larsen, C. J. Wohlk, and B. A. Hall, “Modified bitumen,” in Proceedings of the 14th Australian Road Research Board Conference (ARRB '88), Canberra, Australia, 1988.
  6. F. K. M. Hamed, Evaluation of fatigue resistance for modified asphalt concrete mixture based on dissipate energy concept [Ph.D. thesis], Technische Universität Darmstadt, Darmstadt, Germany, 2010.
  7. H. Wang, Z. You, J. Mills-Beale, and P. Hao, “Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber,” Construction and Building Materials, vol. 26, no. 1, pp. 583–590, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. P. S. Shaw, Stress-strain relationships for granular materials under repeated loading [Ph.D. thesis], Department of Civil Engineering, University of Nottingham, Nottingham, UK, 1980.
  9. A. Mahrez, Properties and performance of stone mastic asphalt reinforced with glass fibre [Ph.D. thesis], Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia, 2008.
  10. N. S. Mashaan, A. H. Ali, M. R. Karim, and M. Abdelaziz, “Effect of crumb rubber concentration on the physical and rheological properties of rubberised bitumen binders,” International Journal of Physical Sciences, vol. 6, no. 4, pp. 684–690, 2011. View at Google Scholar · View at Scopus
  11. N. S. Mashaan, A. H. Ali, M. R. Karim, and M. Abdelaziz, “Effect of blending time and crumb rubber content on properties of crumb rubber modified asphalt binder,” International Journal of Physical Sciences, vol. 6, no. 9, pp. 2189–2193, 2011. View at Google Scholar · View at Scopus
  12. N. S. Mashaan and M. R. Karim, “Investigating the rheological properties of crumb rubber modified bitumen and its correlation with temperature susceptibility,” Materials Research, vol. 16, no. 1, pp. 116–127, 2013. View at Publisher · View at Google Scholar
  13. D. C. Thompson and A. J. Hoiberg, Eds., Bituminous Materials: Asphalt Tars and Pitches, Krieger Publishing Co., New York, NY, USA, 1979.
  14. U. Isacsson and X. Lu, “Characterization of bitumens modified with SEBS, EVA and EBA polymers,” Journal of Materials Science, vol. 34, no. 15, pp. 3737–3745, 1999. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Yildirim, “Polymer modified asphalt binders,” Construction and Building Materials, vol. 21, no. 1, pp. 66–72, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. D. I. Hanson, K. Y. Foo, E. R. Brown, and R. Denson, “Evaluation and characterization of a rubber-modified hot mix asphalt pavement,” Transportation Research Record, no. 1436, pp. 98–107, 1994. View at Google Scholar
  17. J. E. Huffman, “Sahuaro concept of asphalt-rubber binders,” in Proceedings of the 1st Asphalt Rubber User Producer Workshop, Scottsdale, Ariz, USA, 1980.
  18. L. Raad and S. Saboundjian, “Fatigue behavior of rubber-modified pavements,” Transportation Research Record, no. 1639, pp. 73–82, 1998. View at Google Scholar · View at Scopus
  19. H. Y. Katman, Effects of rubberised bitumen on properties of porous mixes [M.S. thesis], University of Malaya, Kuala Lumpur, Malaysia, 2006.
  20. J. R. Lundy, R. G. Hicks, and H. Zhou, “Ground rubber tires in asphalt-concrete mixtures—three case histories,” ASTM Special Technical Publication, STP1193, pp. 262–275, 1993. View at Publisher · View at Google Scholar
  21. H. Zhu and D. D. Carlson, “A spray based crumb rubber technology in highway noise reduction application,” Journal of Solid Waste Technology and Management, vol. 27, no. 1, pp. 27–32, 2001. View at Google Scholar · View at Scopus
  22. Y. Huang, R. N. Bird, and O. Heidrich, “A review of the use of recycled solid waste materials in asphalt pavements,” Resources, Conservation and Recycling, vol. 52, no. 1, pp. 58–73, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. D. R. Brown, D. Jared, C. Jones, and D. Watson, “Georgia's experience with crumb rubber in hot-mix asphalt,” Transportation Research Record, no. 1583, pp. 45–51, 1997. View at Google Scholar · View at Scopus
  24. G. W. Maupin Jr., “Hot mix asphalt rubber applications in Virginia,” Transportation Research Record, no. 1530, pp. 18–24, 1996. View at Google Scholar · View at Scopus
  25. E. Charania, J. O. Cano, and R. H. Schnormeier, “Twenty-year study of asphalt rubber pavement in Phoenix, Arizona,” Transportation Research Record, no. 1307, pp. 29–38, 1991. View at Google Scholar
  26. B. Adhikari, D. De, and S. Maiti, “Reclamation and recycling of waste rubber,” Progress in Polymer Science, vol. 25, no. 7, pp. 909–948, 2000. View at Publisher · View at Google Scholar · View at Scopus
  27. Z. Sufian and M. S. Mustafa, “Prospects of rubberised bitumen pavement Malaysia roads and highways,” in Proceedings of the Conference on the Use of Rubberised Bitumen in the Road Construction, Selangor, Malaysia, 1997.
  28. A. Samsuri, “Properties of rubberised bitumen from reclaimed rubber,” in Proceedings of the Conference on the Use of Rubberised Bitumen in the Road Construction, pp. 15–23, Selangor, Malaysia, 1997.
  29. C. A. O’Flaherty, Highway Engineering Textbook, Edward Arnold, London, UK, 3rd edition, 1988.
  30. W. Jensen and M. Abdelrahman, “Crumb rubber in performance-graded asphalt binder,” Final Report SPR-0105, Nebraska Department of Roads, University of Nebraska-Lincoln, 2006. View at Google Scholar
  31. F. P. Miknis and L. C. Michon, “Some applications of nuclear magnetic resonance imaging to crumb rubber modified asphalts,” Fuel, vol. 77, no. 5, pp. 393–397, 1998. View at Google Scholar · View at Scopus
  32. J. Shen, S. Amirkhanian, F. Xiao, and B. Tang, “Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders,” Construction and Building Materials, vol. 23, no. 1, pp. 304–310, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. D. Croney and P. Croney, The Design and Performance of Road Pavement, McGraw-Hill Book Co., London, UK, 2nd edition, 1992.
  34. S. J. Rozeveld, E. Shin, A. Bhurke, L. France, and L. Drzal, “Network morphology of straight and polymer modified asphalt cements,” Microscopy Research and Technique, vol. 38, no. 5, pp. 529–543, 1997. View at Google Scholar
  35. J. S. Youtcheff and D. R. Jones IV, Guideline for Asphalt Refiners and Suppliers, Strategic Highway Research Program, National Research Council, Washington, DC, USA, 1994.
  36. J. D. McLean and P. K. Kilpatrick, “Comparison of precipitation and extrography in the fractionation of crude oil residua,” Energy and Fuels, vol. 11, no. 3, pp. 570–585, 1997. View at Google Scholar · View at Scopus
  37. J. M. Read and C. D. Whiteoak, The Shell Bitumen Handbook, Thomas Telford Publishing, London, UK, 5th edition, 2003.
  38. K. H. Altgelt and M. M. Boduszynski, Composition and Analysis of Heavy Petroleum Fractions, Marcel Dekker, New York, NY, USA, 1994.
  39. I. Merdrignac and D. Espinat, “Physicochemical characterization of petroleum fractions: the state of the art,” Oil and Gas Science and Technology, vol. 62, no. 1, pp. 7–32, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. F. J. Navarro, P. Partal, F. Martínez-Boza, C. Valencia, and C. Gallegos, “Rheological characteristics of ground tire rubber-modified bitumens,” Chemical Engineering Journal, vol. 89, no. 1–3, pp. 53–61, 2002. View at Publisher · View at Google Scholar · View at Scopus
  41. L. H. Lewandowski, “Polymer modification of paving asphalt binders,” Rubber Chemistry and Technology, vol. 67, no. 3, pp. 447–480, 1994. View at Google Scholar · View at Scopus
  42. R. Dongre, J. Youtcheff, and D. Anderson, “Mit Rheologie zu besseren strassen,” Rheology Hannover, vol. 6, no. 2, pp. 75–82, 1996. View at Google Scholar · View at Scopus
  43. J. F. Masson, T. Price, and P. Collins, “Dynamics of bitumen fractions by thin-layer chromatography/flame ionization detection,” Energy and Fuels, vol. 15, no. 4, pp. 955–960, 2001. View at Publisher · View at Google Scholar · View at Scopus
  44. F. J. Nellensteyn, “The Constitution of asphalt,” Journal of the Institute of Petroleum Technology, vol. 10, pp. 311–325, 1924. View at Google Scholar
  45. P. Claudy, J. M. Letoffe, G. N. King, J. P. Planche, and B. Brule, “Characterization of paving asphalts by Differential Scanning Calorimetry,” Fuel Science and Technology International, vol. 9, no. 1, pp. 71–92, 1991. View at Google Scholar · View at Scopus
  46. L. Loeber, G. Muller, J. Morel, and O. Sutton, “Bitumen in colloid science: a chemical, structural and rheological approach,” Fuel, vol. 77, no. 13, pp. 1443–1450, 1998. View at Google Scholar · View at Scopus
  47. R. D. Krebs and R. D. Walker, Highway Materials, McGraw-Hill, New York, NY, USA, 1971.
  48. F. J. Navarro, P. Partal, M. García-Morales et al., “Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: a comparative analysis,” Journal of Industrial and Engineering Chemistry, vol. 15, no. 4, pp. 458–464, 2009. View at Publisher · View at Google Scholar · View at Scopus
  49. I. Widyatmoko and R. Elliott, “Characteristics of elastomeric and plastomeric binders in contact with natural asphalts,” Construction and Building Materials, vol. 22, no. 3, pp. 239–249, 2008. View at Publisher · View at Google Scholar · View at Scopus
  50. R. E. Robertson, “Chemical properties of asphalts and their relationship to pavement performance,” Tech. Rep. SHRP-A/UWP-91-510, Strategic Highway Research Program, Washington, DC, USA, 1991, http://onlinepubs.trb.org/onlinepubs/shrp/SHRP-91-510.pdf. View at Google Scholar
  51. J. P. Pfeiffer and R. N. J. Saal, “Asphaltic bitumen as colloid system,” Journal of Physical Chemistry, vol. 44, no. 2, pp. 139–149, 1940. View at Google Scholar · View at Scopus
  52. J. F. Masson, V. Leblond, and J. Margeson, “Bitumen morphologies by phase-detection atomic force microscopy,” Journal of Microscopy, vol. 221, no. 1, pp. 17–29, 2006. View at Publisher · View at Google Scholar · View at Scopus
  53. A. T. Pauli, J. F. Branthaver, R. E. Robertson, W. Grimes, and C. M. Eggleston, “Atomic force microscopy investigation of SHRP asphalts,” in Heavy Oil and Resid Compatibility and Stability, pp. 110–114, Division of Petroleum Chemistry, American Chemical Society, San Diego, Calif, USA, 2001. View at Google Scholar
  54. M. Hossain, S. Swartz, and E. Hoque, “Fracture and tensile characteristics of asphalt-rubber concrete,” Journal of Materials in Civil Engineering, vol. 11, no. 4, pp. 287–294, 1999. View at Google Scholar · View at Scopus
  55. H. A. Khalid, “Recent research on use of rubber in asphalt,” in Proceedings of the WRAP Rubber in Roads Seminar, University of Liverpool, Liverpool, UK, 2005.
  56. S. Liu, W. Cao, J. Fang, and S. Shang, “Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt,” Construction and Building Materials, vol. 23, no. 7, pp. 2701–2708, 2009. View at Publisher · View at Google Scholar · View at Scopus
  57. Y. Becker, M. P. Méndez, and Y. Rodríguez, “Polymer modified asphalt,” Vision Tecnologica, vol. 9, no. 1, pp. 39–50, 2001. View at Google Scholar · View at Scopus
  58. J. Shen, S. Amirkhanian, F. Xiao, and B. Tang, “Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders,” Construction and Building Materials, vol. 23, no. 1, pp. 304–310, 2009. View at Publisher · View at Google Scholar · View at Scopus
  59. M. A. Abdelrahman and S. H. Carpenter, “Mechanism of interaction of asphalt cement with crumb rubber modifier,” Transportation Research Record, no. 1661, pp. 106–113, 1999. View at Google Scholar · View at Scopus
  60. G. D. Airey, M. M. Rahman, and A. C. Collop, “Absorption of bitumen into crumb rubber using the basket drainage method,” International Journal of Pavement Engineering, vol. 4, no. 2, pp. 105–119, 2003. View at Publisher · View at Google Scholar · View at Scopus
  61. J. Shen and S. Amirkhanian, “The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders,” International Journal of Pavement Engineering, vol. 6, no. 4, pp. 265–271, 2005. View at Publisher · View at Google Scholar · View at Scopus
  62. K. D. Jeong, S. J. Lee, S. N. Amirkhanian, and K. W. Kim, “Interaction effects of crumb rubber modified asphalt binders,” Construction and Building Materials, vol. 24, no. 5, pp. 824–831, 2010. View at Publisher · View at Google Scholar · View at Scopus
  63. H. Y. Katman, M. R. Karim, M. R. Ibrahim, and A. Mahrez, “Effect of mixing type on performance of rubberized porous asphalt,” in Proceedings of the 6th International Conference of Eastern Asia Society for Transportation Studies (EASTS '05), Bangkok, Thailand, September 2005.
  64. C. Thodesen, K. Shatanawi, and S. Amirkhanian, “Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity,” Construction and Building Materials, vol. 23, no. 1, pp. 295–303, 2009. View at Publisher · View at Google Scholar · View at Scopus
  65. S. J. Lee, S. N. Amirkhanian, and K. Shatanawi, “Effect of reaction time on physical and chemical properties of rubber-modified binders,” in Proceedings of the International Rubber Conference, Compendium of Papers CD-Rom, Lyon, France, May 2006.
  66. S. J. Lee, C. K. Akisetty, and S. N. Amirkhanian, “The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements,” Construction and Building Materials, vol. 22, no. 7, pp. 1368–1376, 2008. View at Publisher · View at Google Scholar · View at Scopus
  67. F. Xiao, S. N. Ameirkhanian, and B. J. Putman, “Laboratory investigation of dimensional changes of crumb rubber reacting with asphalt binder,” in Proceedings of the Asphalt Rubber 2006 Conference, Palms spring, Calif, USA, 2006.
  68. F. Moreno, M. C. Rubio, and M. J. Martinez-Echevarria, “Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes,” Construction and Building Materials, vol. 25, no. 5, pp. 2323–2334, 2011. View at Publisher · View at Google Scholar · View at Scopus
  69. B. J. Putman, J. U. Thompson, and S. N. Amirkhanian, “High temperature properties of crumb rubber modified binders,” in Proceedings of the Mairepav 4 International Symposium: Maintenance and Rehabilitation of Pavements and Technological Control (iSMARTi '05), Belfast, Northern Ireland, August 2005.
  70. A. P. Paulo and C. P. Jorge, “Laboratory optimization of continuous blend asphalt rubber,” in Proceedings of 3rd European Pavement and Asset Management Conference (EPAM '08), Coimbra, Portugal, July 2008.
  71. A. N. S. Beaty, “Latex-modified bitumen for improved resistance to brittle fracture,” Highways and Transportation, vol. 39, no. 9, pp. 32–41, 1992. View at Google Scholar · View at Scopus
  72. A. K. Doolittle, “Studies in newtonian flow. II. the dependence of the viscosity of liquids on free-space,” Journal of Applied Physics, vol. 22, no. 12, pp. 1471–1475, 1951. View at Publisher · View at Google Scholar · View at Scopus
  73. J. P. Pfeiffer and P. M. Van Doormaal, “The rheological properties of asphaltic bitumen,” Journal of the Institute of Petroleum Technologists, vol. 22, pp. 414–440, 1936. View at Google Scholar
  74. M. J. Fernando and H. R. Guriguis, “Natural rubber for improved surfacing,” in Proceedings of the 12th Australian Road Research Board Conference (ARRB '84), vol. 12, part 2, pp. 121–129, August 1984.
  75. C. Van der Poel, “A general system describing the viscoelastic properties of bitumen and its relation to routine test data,” Journal of Applied Chemistry, vol. 4, pp. 221–236, 1954. View at Google Scholar
  76. G. S. Natu and A. A. Tayebali, “Mixture design and accelerated laboratory performance evaluation of unmodified and crumb rubber modified mixtures,” Association of Asphalt Paving Technologists, vol. 68, pp. 192–221, 1999. View at Google Scholar
  77. N. R. Nair, N. M. Mathew, S. Thomas, P. Chatterjee, and M. A. Siddiqui, “Physical and rheological characteristics of liquid natural rubber modified bitumen,” Journal of Applied Polymer Science, vol. 68, no. 1, pp. 53–61, 1998. View at Google Scholar · View at Scopus
  78. A. A. Zaman, A. L. Fricke, and C. L. Beatty, “Rheological properties of rubber-modified asphalt,” Journal of Transportation Engineering, vol. 121, no. 6, pp. 461–467, 1995. View at Google Scholar · View at Scopus
  79. C. J. Piggott, D. E. Sadler, and E. M. Villiers, “Bitumen rubber asphalt experiences in the RSA,” in Proceedings of the 7th Conference on Asphalt Pavement for Southern Africa, 1977.
  80. P. Kumar, H. C. Mehndiratta, and K. L. Singh, “Rheological properties of crumb rubber modified bitumen—a lab study,” Journal of Scientific and Industrial Research, vol. 68, no. 9, pp. 812–816, 2009. View at Google Scholar · View at Scopus
  81. J. W. H. Oliver, “Modification of paving asphalts by digestion with scrap rubber,” Transportation Research Record, no. 821, pp. 37–44, 1981. View at Google Scholar
  82. J. C. Rosner and J. G. Chehovits, “Chemical and physical properties of asphalt-rubber mixtures. Part III, vol. 4: physical properties of field-mixed asphalt-rubber mixtures and comparisons of lab and field-mixed asphalt-rubbers,” Tech. Rep. FHWA/AZ-82/159/4, Arizona Department of Transportation, 1982. View at Google Scholar
  83. A. Mahrez and M. Rehan, “Rheological evaluation of aging properties of crumb rubber-modified bitumen,” Journal of the Eastern Asia Society for Transportation Studied, vol. 5, pp. 820–833, 2003. View at Google Scholar
  84. G. Martinez, B. Caicedo, L. Celis, and D. González, “Rheological behaviour of asphalt with crumb rubber and other modifiers,” in Proceedings of the Asphalt Rubber 2006 Conference, Palms Spring, Calif, USA, 2006.
  85. J. C. Peterson, “Chemical composition of asphalt as related to asphalt durability: state of the art,” Transportation Research Record, no. 999, pp. 13–30, 1984. View at Google Scholar
  86. H. U. Bahia and D. A. Anderson, “Glass transition behavior and physical hardening of asphalt binders,” Journal of the Association of Asphalt Paving Technologists, vol. 62, pp. 93–129, 1993. View at Google Scholar
  87. L. C. E. Struik, Physical Aging in Amorphous Polymers and Other Materials, Elsevier Scientific Publisher, New York, NY, USA, 1978.
  88. A. H. Ali, N. S. Mashaan, and M. R. Karim, “Investigations of physical and rheological properties of aged rubberised bitumen,” Advances in Materials Science and Engineering, vol. 2013, Article ID 239036, 7 pages, 2013. View at Publisher · View at Google Scholar
  89. M. Claxton, J. Lesage, and L. Planc, “The use of binder rheological properties to predict the perfprmance of asphalt mixes,” in Proceedings of the Australian Road Research Board Conference (ARRB '96), Part 2, pp. 311–326, 1996.
  90. H. U. Bahia and R. Davies, “Effect of crumb rubber modifiers (CRM) on performance-related properties of asphalt binders,” Journal of the Association of Asphalt Paving Technologists, vol. 63, pp. 414–449, 1994. View at Google Scholar
  91. S. Aflaki and M. Memarzadeh, “Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen,” Construction and Building Materials, vol. 25, no. 4, pp. 2094–2106, 2011. View at Publisher · View at Google Scholar · View at Scopus
  92. H. U. Bahia and D. A. Anderson, “Strategic highway research program binder rheological parameters: background and comparison with conventional properties,” Transportation Research Record, no. 1488, pp. 32–39, 1995. View at Google Scholar · View at Scopus
  93. H. R. Soleymani, H. Zhai, and H. Bahia, “Role of modified binders in rheology and damage resistance behavior of asphalt mixtures,” Transportation Research Record, no. 1875, pp. 70–79, 2004. View at Google Scholar · View at Scopus
  94. R. B. McGennis, “Evaluation of physical properties of fine crumb rubber-modified asphalt binders,” Transportation Research Record, no. 1488, pp. 62–71, 1995. View at Google Scholar · View at Scopus
  95. T. C. Billiter, R. R. Davison, C. J. Glover, and J. A. Bullin, “Physical properties of asphalt-rubber binder,” Petroleum Science and Technology, vol. 15, no. 3-4, pp. 205–236, 1997. View at Google Scholar · View at Scopus
  96. K. Majidzadeh, G. J. Ilves, and M. S. Luther, “Reflection cracking models: review and laboratory evaluation of engineering fabrics,” Transportation Research Record, no. 916, pp. 18–25, 1983. View at Google Scholar · View at Scopus
  97. P. E. Joseph, R. Hass, W. A. Phang, and L. Rothenburg, “Low temperature reflecting cracking through asphalt overlays,” in Proceeding 6th International Conference on Structural Design of Asphalt Pavements, vol. 1, pp. 13–17, 1987.
  98. C. T. Shin, M. Tia, and B. E. Ruth, “Evaluation of the effect of crumb rubber and SBR on rutting resistance of asphalt concrete,” American Chemical Society Division Fuel Chemistry, vol. 41, no. 4, pp. 1227–1231, 1996. View at Google Scholar
  99. S. Tayfur, H. Ozen, and A. Aksoy, “Investigation of rutting performance of asphalt mixtures containing polymer modifiers,” Construction and Building Materials, vol. 21, no. 2, pp. 328–337, 2007. View at Publisher · View at Google Scholar · View at Scopus
  100. E. R. Brown and S. A. Cross, “A national study of rutting in asphalt pavement,” Journal of the Association of Asphalt Paving Technologists, vol. 61, pp. 535–583, 1992. View at Google Scholar
  101. J. Harvey, S. Weissman, F. Long, and C. Monismith, “Tests to evaluate the stiffness and permanent deformation characteristics of asphalt/binder-aggregate mixes, and their use in mix design and analysis,” in Proceedings of the Asphalt Paving Technology, pp. 572–604, March 2001. View at Scopus
  102. M. J. Fernando and M. S. Mesdary, “Effect of rubberised asphalt on Portland cement coated aggregates in road construction under severe conditions of traffic and climate,” in Proceedings of the 14th Australian Road Research Board Conference (ARRB '88), vol. 14, pp. 78–86, 1988.
  103. Asphalt Institute, Mix Design Methods for Asphalt Concrete and Other Hot Mix Types, Asphalt Institute Manual Series no. 2 (MS-2), 1990.
  104. L. K. Wayne and F. L. Roberts, “Perliminary framework for a rotational bituminous mix design to mitigate pavement failures,” in Proceedings of the 14th Australian Road Research Board Conference (ARRB '88), vol. 14, pp. 45–53, 1988.
  105. L. E. Wood and M. S. Mamlouk, “Effect of aggregate top size on asphalt emulsion mixture properties,” Transportation Research Record, no. 821, pp. 44–49, 1981. View at Google Scholar
  106. M. Brennen, M. Tia, A. Altshaeffl, and L. E. Wood, “Laboratory investigation of the use of foamed asphalt for recycled bituminous pavements,” Transportation Research Record, no. 911, pp. 80–87, 1983. View at Google Scholar
  107. W. Hadley, W. Hudson, and T. W. Kennedy, “A method of estimating tensile properties of materials tested in indirect tension,” Summary Report 7-98, Center for Highway Research, Austin, Tex, USA, 1970. View at Google Scholar
  108. M. W. Witczak, K. E. Kaloush, T. Pellinen, M. El-Basyouny, and H. Von Quintus, “Simple performance test for superpave mix design,” National Cooperation Highway Research Program (NCHRP) Report 465, Arizona State University, 2002. View at Google Scholar
  109. SHRP, “Standard method for the test of determining of fatigue life of compacted bituminous mixture subjected to repeated flexural bending,” SHRP Designation M-009, 1994. View at Google Scholar
  110. M. N. Guddati, Z. Feng, and R. Kim, “Toward a micromechanics-based procedure to characterize fatigue performance of asphalt concrete,” Transportation Research Record, no. 1789, pp. 121–128, 2002. View at Publisher · View at Google Scholar · View at Scopus
  111. R. A. Eaton, R. J. Roberts, and R. R. Blackburn, “Use of scrap rubber in asphalt pavement surfaces,” Special Report 91-27, U.S. Army Corps of Engineers, Cold Regions Research and Engineering Laboratory, 1991. View at Google Scholar
  112. N. L. Dallas and M. Kamyar, “Overview of a rational asphalt concrete mixture design for Texas,” Journal of the Transportation Research Board, no. 1269, pp. 125–132, 1990. View at Google Scholar
  113. H. Al-Abdul-Wahhab and G. Al-Amri, “Laboratory evaluation of reclaimed rubber asphaltic concrete mixes,” Journal of Materials in Civil Engineering, vol. 3, no. 3, pp. 189–203, 1991. View at Google Scholar · View at Scopus
  114. J. M. Read, Fatigue cracking of bituminous paving mixtures [Ph.D. thesis], Department of Civil Engineering, University of Nottingham, Nottingham, UK, 1996.
  115. M. Castro and J. A. Sánchez, “Estimation of asphalt concrete fatigue curves—a damage theory approach,” Construction and Building Materials, vol. 22, no. 6, pp. 1232–1238, 2008. View at Publisher · View at Google Scholar · View at Scopus