Research Article
Cutting Force Predication Based on Integration of Symmetric Fuzzy Number and Finite Element Method
Table 5
The simulation of force average values and the measured average values.
| Serial number | Cutting speed (m/min) | Back engagement of cutting edge (mm) | feed rate (mm) | Measurement value (N) | Predicted value (N) | Absolute error (%) |
| 1 | 254 | 0.75 | 0.1 | 390.08 | 369.44 | 5.29% | 2 | 254 | 0.75 | 0.2 | 464.01 | 448.12 | 3.42% | 3 | 254 | 0.75 | 0.3 | 530.78 | 508.75 | 4.15% | 4 | 254 | 0.75 | 0.4 | 612.19 | 573.38 | 6.34% | 5 | 254 | 0.75 | 0.5 | 741.11 | 698.27 | 5.78% | 6 | 170 | 0.5 | 0.1 | 185.14 | 191.92 | −3.66% | 7 | 170 | 0.5 | 0.2 | 225.85 | 209.48 | 7.25% | 8 | 170 | 0.5 | 0.3 | 278.39 | 290.86 | −4.48% | 9 | 170 | 0.5 | 0.4 | 340.47 | 359.3 | −5.53% | 10 | 170 | 0.5 | 0.5 | 368.33 | 336.91 | 8.53% | 11 | 127 | 0.25 | 0.1 | 131.11 | 121.76 | 7.13% | 12 | 127 | 0.25 | 0.2 | 158.22 | 169.11 | −6.88% | 13 | 127 | 0.25 | 0.3 | 171.56 | 183.59 | −7.01% | 14 | 127 | 0.25 | 0.4 | 181.39 | 166.81 | 8.04% |
|
|