The Scientific World Journal / 2014 / Article / Fig 12

Research Article

The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

Figure 12

Effects of factors on cutting force for radial cutter path strategy: (a) cutting speed, (b) feed rate, and (c) step over.
374526.fig.0012a
(a) Cutting speed (m/min)
374526.fig.0012b
(b) Feed rate (mm/tooth)
374526.fig.0012c
(c) Step over (mm)