The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

Table 7

Response table for total cutting force for radial strategy.

Level	𝑉𝑐	𝐹𝑐	𝑆𝑜
1	−50.45	−47.83	−47.65
2	−48.41	−49.93	−50.70
3	−51.77	−52.86	−52.28
Delta	3.36	5.03	4.63
Rank	3	1	2