The Influence of Tool Path Strategies on Cutting Force and Surface Texture during Ball End Milling of Low Curvature Convex Surfaces

Table 9

Response table for total cutting force for spiral strategy.

Level	𝑉𝑐	𝐹𝑐	𝑆𝑜
1	−56.21	−54.71	−56.79
2	−55.68	−58.48	−56.87
3	−61.55	−60.26	−59.79
Delta	5.87	5.55	3.01
Rank	1	2	3