Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 375206, 10 pages
http://dx.doi.org/10.1155/2014/375206
Research Article

Characterization of Modified Tapioca Starch Solutions and Their Sprays for High Temperature Coating Applications

1Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia
2Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia
3Department of Chemical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia

Received 5 August 2013; Accepted 26 November 2013; Published 28 January 2014

Academic Editors: W. Li, T. K. Vaidyanathan, and L. Yu

Copyright © 2014 M. Y. Naz et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [14 citations]

The following is the list of published articles that have cited the current article.

  • M. Y. Naz, and S. A. Sulaiman, “Testing of starch-based carbohydrate polymer coatings for enhanced urea performance,” Journal of Coatings Technology and Research, vol. 11, no. 5, pp. 747–756, 2014. View at Publisher · View at Google Scholar
  • Muhammad Yasin Naz, Shaharin Anwar Sulaiman, and Bambang Ariwahjoedi, “Effect of the borax mass and pre-spray medium temperature on droplet size and velocity vector distributions of intermittently sprayed starchy solutions,” Phys. Chem. Chem. Phys., vol. 17, no. 5, pp. 3704–3714, 2014. View at Publisher · View at Google Scholar
  • M. Y. Naz, S. A. Sulaiman, B. Ariwahjoedi, and K. Z. Ku Shaari, “Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature,” Materials Research Innovations, vol. 18, pp. 135–139, 2014. View at Publisher · View at Google Scholar
  • Sami Ullah, M. A. Bustam, M. Nadeem, M. Y. Naz, W. L. Tan, and A. M. Shariff, “Synthesis and Thermal Degradation Studies of Melamine Formaldehyde Resins,” The Scientific World Journal, vol. 2014, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  • Muhammad Yasin Naz, and Shaharin Anwar Sulaiman, “Surface Morphology and Dissolution Rate of Slow Discharge Urea Coated with Starch-Urea-Borax Matrix,” Polymer-Plastics Technology And Engineering, vol. 53, no. 17, pp. 1778–1787, 2014. View at Publisher · View at Google Scholar
  • Naz, Sulaiman, Ariwahjoedi, and Shaari, “Effect of pre-coat solution temperature on fluidized bed urea coatings,” Surface Engineering, vol. 31, no. 7, pp. 486–491, 2015. View at Publisher · View at Google Scholar
  • Muhammad Yasin Naz, Shaharin Anwar Sulaiman, and Zakaria Man, “Time Function DualPDA Study of Spray Growth and Droplet Size-Velocity Profiles of Chemically Modified Tapioca Starch,” Aerosol And Air Quality Research, vol. 15, no. 5, pp. 1699–1711, 2015. View at Publisher · View at Google Scholar
  • M. Y. Naz, and S. A. Sulaiman, “Physico-chemical properties of carbohydrate polymer coatings for slow release urea industry,” Main Group Chemistry, vol. 14, no. 1, pp. 35–42, 2015. View at Publisher · View at Google Scholar
  • M.Y. Naz, and S.A. Sulaiman, “PTV profiling of particles motion from the top and side of a swirling fluidized bed,” Journal of Instrumentation, vol. 11, no. 05, pp. P05019–P05019, 2016. View at Publisher · View at Google Scholar
  • Muhammad Yasin Naz, and Shaharin Anwar Sulaiman, “Slow release coating remedy for nitrogen loss from conventional urea: A review,” Journal of Controlled Release, 2016. View at Publisher · View at Google Scholar
  • Khalid Ibrahim, Muhammad Naz, Shaharin Sulaiman, Abdul Ghaffar, Yasir Jamil, and Nasser Abdel-Salam, “Effect of Urea and Borate Plasticizers on Rheological Response of Corn Starch,” Polymers, vol. 9, no. 9, pp. 361, 2017. View at Publisher · View at Google Scholar
  • Muhammad Yasin Naz, and Shaharin Anwar Sulaiman, “Attributes of natural and synthetic materials pertaining to slow-release urea coating industry,” Reviews in Chemical Engineering, vol. 33, no. 3, pp. 293–308, 2017. View at Publisher · View at Google Scholar
  • Muhammad Yasin Naz, Shaharin Anwar Sulaiman, and Mohammed A. Bou-Rabee, “Particle tracking velocimetry investigations on density dependent velocity vector profiles of a swirling fluidized bed,” Drying Technology, vol. 35, no. 2, pp. 193–202, 2017. View at Publisher · View at Google Scholar
  • Xin Tong, Xueqin He, Hongwei Duan, Lujia Han, and Guangqun Huang, “Evaluation of Controlled Release Urea on the Dynamics of Nitrate, Ammonium, and Its Nitrogen Release in Black Soils of Northeast China,” International Journal of Environmental Research and Public Health, vol. 15, no. 1, pp. 119, 2018. View at Publisher · View at Google Scholar