Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 392048, 12 pages
http://dx.doi.org/10.1155/2014/392048
Research Article

Calculation of Reaction Forces in the Boiler Supports Using the Method of Equivalent Stiffness of Membrane Wall

Mechanical Engineering Faculty in Slavonski Brod, Trg Ivane Brlić-Mažuranić 2, 35 000 Slavonski Brod, Croatia

Received 29 August 2013; Accepted 29 December 2013; Published 15 May 2014

Academic Editors: S. Kou and K.-L. Ou

Copyright © 2014 Josip Sertić et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. Milošević-Mitić, B. Gaćeša, N. Anđelić, and T. Maneski, “Numerical calculation of the water-tube boiler using finite element of the orthotropic plate,” Structural Integrity and Life, vol. 12, no. 3, pp. 185–190, 2012. View at Google Scholar
  2. M. T. Huber, “Die grundlagen einer rationellen berechnung der kreuzweise bewehrten eisenbetonplatten,” Zeitschrift des Österreichischen Ingenieur- und Architekten-Vereins, vol. 66, pp. 557–564, 1914. View at Google Scholar
  3. M. T. Huber, “Die Theorie der kreuzweise bewehrten Eisenbeton-platten nebst Anwendungen auf mehrere bautechnisch wichtige Aufgaben über rechteckige Platten,” Bauingenieur, vol. 4, pp. 354–360, 1923. View at Google Scholar
  4. M. T. Huber, Probleme der Statik Technisch Wichtiger Orthotroper Platten, Nakkadem Akadenji Nauk Technicznych, Warszawa, Poland, 1929.
  5. W. Flügge, “Die Stabilität der Kreiszylinderschale,” Ingenieur-Archiv, vol. 3, no. 5, pp. 463–506, 1932. View at Publisher · View at Google Scholar · View at Scopus
  6. A. van der Neut, “The general instability of stiffened cylindrical shells under axial compression,” Report S. 314, National Luchtvaartlaboratorium, 1947. View at Google Scholar
  7. F. A. Dale, R. C. T. Smith et al., “Grid sandwich panels in compression,” Report ACA-16, Australian Council for Aeronautics, 1945. View at Google Scholar
  8. C. B. Smith, T. B. Heebink, and C. B. Norris, “The effective stiffness of a stiffener attached to a flat plywood plate,” Report 1557, U. S. Department of Agriculture, Forest Products Laboratory, 1946. View at Google Scholar
  9. A. Pflüger, “Zum Beulproblem der anisotropen Rechteckplatte,” Ingenieur-Archiv, vol. 16, no. 2, pp. 111–120, 1947. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Gomza and P. Seide, “Minimum-weight design of simply supported transversely stiffened plates under compression,” NACA TN 1710, 1948. View at Google Scholar
  11. C. Libove and R. E. Hubka, “Elastic constants for corrugated-core sandwich plates,” NACA TN 2289, 1951. View at Google Scholar
  12. C. Libove and S. B. Batdorf, “A general small-deflection theory for flat sandwich plates,” NACA Report 899, 1948. View at Google Scholar
  13. E. Reissner, “On small bending and stretching of sandwich-type shells,” International Journal of Solids and Structures, vol. 13, no. 12, pp. 1293–1300, 1977. View at Google Scholar · View at Scopus
  14. M. Stein and J. Mayers, “A small-deflection theory for curved sandwich plates,” NACA Report 1008, 1951. View at Google Scholar
  15. N. J. Huffington Jr., “Theoretical determination of rigidity properties of orthogonally stiffened plates,” Journal of Applied Mechanics, vol. 23, pp. 15–20, 1956. View at Google Scholar
  16. G. Gerard, “Minimum weight analysis of orthotropic plates under compressive loading,” Journal of the Aeronautical Sciences, vol. 27, no. 1, pp. 21–26, 1960. View at Google Scholar
  17. M. Baruch and J. Singer, “Effect of eccentricity of stiffeners on the general instability of stiffened cylindrical shells under hydrostatic pressure,” Journal of Mechanical Engineering Science, vol. 5, no. 1, pp. 23–27, 1963. View at Google Scholar
  18. R. J. Clifton, J. C. L. Chang, and T. Au, “Analysis of orthotropic plate bridges,” ASCE Journal of the Structural Division, vol. 89, no. 5, pp. 133–171, 1963. View at Google Scholar
  19. W. J. Stroud, “Elastic constants for bending and twisting of corrugation-stiffened panels,” NASA TR R 166, 1963. View at Google Scholar
  20. R. R. Meyer and R. J. Bellefante, “Fabrication and experimental evaluation of common domes having waffle-like stiffening—part I—program development,” Report SM 47742, Douglas Missile & Space Systems Division, 1964. View at Google Scholar
  21. T.-C. Soong, “Buckling of cylindrical shells with eccentric spiral-type stiffeners,” AIAA Journal, vol. 7, no. 10, pp. 65–72, 1969. View at Google Scholar
  22. R. R. Meyer, “Comments on: buckling of cylindrical shells with eccentric spiral-type stiffeners,” AIAA Journal, vol. 7, no. 10, p. 2047, 1969. View at Google Scholar
  23. T.-C. Soong, “Reply by author to R. R. Meyer,” AIAA Journal, vol. 7, no. 10, pp. 2047–2048, 1969. View at Google Scholar
  24. F. Nishino, R. P. Pama, and S.-L. Lee, “Orthotropic plates with eccentric stiffeners,” International Association of Bridge Structural Engineering, vol. 34, no. 2, pp. 117–129, 1974. View at Google Scholar
  25. W. L. Ko, “Elastic constants for superplastically formed/diffusion-bonded sandwich structures,” in Proceedings of the AIAA/ASME/AHS 20th Structures, Structural Dynamics, and Materials Conference, AIAA paper 79-0756, 1979.
  26. W. L. Ko, “Elastic constants for superplastically formed/diffusion-bonded sandwich structures,” AIAA Journal, vol. 18, no. 8, pp. 986–987, 1980. View at Google Scholar
  27. W. L. Ko, “Elastic stability of superplastically formed/diffusion-bonded orthogonally corrugated core sandwich plates,” in Proceedings of the AIAA/ASME/AHS 21st Structures, Structural Dynamics, and Materials Conference, AIAA paper 80-0683, 1980.
  28. N. Jaunky, N. F. Knight Jr., and D. R. Ambur, “Formulation of an improved smeared stiffener theory for buckling analysis of grid-stiffened composite panels,” NASA TM 110162, 1995. View at Google Scholar
  29. N. Jaunky, F. Knight, and D. R. Ambur, “Formulation of an improved smeared stiffener theory for buckling analysis of grid-stiffened composite panels,” Composites B, vol. 27, pp. 519–526, 1996. View at Google Scholar
  30. J. Sertić, D. Kozak, D. Damjanović, and P. Konjatić, “Homogenization of steam boiler membrane wall,” in Proceedings of 7th International Congress of Croatian Society of Mechanics, Zadar, 2012.
  31. J. Sertić, I. Gelo, D. Kozak, D. Damjanović, and P. Konjetić, “Teoretical determination of elasticity constants for steam boiler membrane wall as the structurally ortotropic plate,” in Proceeding of 4th International Scientific and Expert Conference of the International TEAM Society, Slavonski Brod, 2012.
  32. J. Sertić, I. Gelo, D. Kozak, D. Damjanović, and P. Konjatić, “Theoretical determination of elasticity constants for steam boiler membrane wall as the structurally orthotropic plate,” Technical Gazette, vol. 20, no. 4, pp. 697–703, 2013. View at Google Scholar
  33. R. Solecki and R. J. Conant, Advanced Mechanics of Materials, Oxford University Press, Oxford, UK, 2003.
  34. E. Ventsel and T. Krauthammer, Thin Plates and Shells. Theory, Analysis and Applications, Marcel Dekker, Basel, Switzerland, 2001.
  35. V. V. Novozhilov, Thin Shell Theory, Noordhoff, Groningen, Germany, 1964.
  36. ASME B31.1, 1995.