Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 413753, 7 pages
http://dx.doi.org/10.1155/2014/413753
Research Article

Hybrid Composite Laminates Reinforced with Kevlar/Carbon/Glass Woven Fabrics for Ballistic Impact Testing

Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor Darul Ehsan, Malaysia

Received 15 August 2013; Accepted 24 October 2013; Published 12 May 2014

Academic Editors: H. Kaplan Can, Z. Peng, Y.-W. Yen, and S. Zheng

Copyright © 2014 Elias Randjbaran et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Abrate, “Ballistic impacts on composite and sandwich structures,” in Major Accomplishments in Composite Materials and Sandwich Structures, pp. 465–501, Springer, Amsterdam, The Netherlands, 20102011. View at Google Scholar
  2. A. Aktas, M. Aktas, and F. Turan, “The effect of stacking sequence on the impact and post-impact behavior of woven/knit fabric glass/epoxy hybrid composites,” Composite Structures, vol. 103, pp. 119–135, 2013. View at Google Scholar
  3. Y. Shi, T. Swait, and C. Soutis, “Modelling damage evolution in composite laminates subjected to low velocity impact,” Composite Structures, vol. 94, no. 9, pp. 2902–2913, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. Á. Arias, J. López-Puente, J. A. Loya, D. Varas, and R. Zaera, “Analysis of high-speed impact problems in the aircraft industry,” in Constitutive Relations Under Impact Loadings, pp. 137–207, Springer, Vienna, Austria, 2014. View at Google Scholar
  5. X. Xu, Z. Zhou, Y. Hei, B. Zhang, J. Bao, and X. Chen, “Improving compression-after-impact performance of carbon-fiber composites by CNTs/thermoplastic hybrid film interlayer,” Composites Science and Technology, vol. 95, pp. 75–81, 2014. View at Google Scholar
  6. J. Njuguna, S. Michałowski, K. Pielichowski, K. Kayvantash, and A. C. Walton, “Fabrication, characterization and low-velocity impact testing of hybrid sandwich composites with polyurethane/layered silicate foam cores,” Polymer Composites, vol. 32, no. 1, pp. 6–13, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. E. V. González, P. Maimí, P. P. Camanho, C. S. Lopes, and N. Blanco, “Effects of ply clustering in laminated composite plates under low-velocity impact loading,” Composites Science and Technology, vol. 71, no. 6, pp. 805–817, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Udatha, C. V. S. Kumar, N. S. Nair, and N. K. Naik, “High velocity impact performance of three-dimensional woven composites,” The Journal of Strain Analysis For Engineering Design, vol. 47, no. 7, pp. 419–431, 2012. View at Publisher · View at Google Scholar
  9. M. T. H. Sultan, S. Basri, A. S. M. Rafie, F. Mustapha, D. L. Majid, and M. R. Ajir, “High velocity impact damage analysis for glass epoxy-Laminated plates,” Advanced Materials Research, vol. 399–401, pp. 2318–2328, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. US Department of Commerce, National Bureau of Standards, Law Enforcement Standards Laboratory, & United States of America, “Ballistic Resistant Protective Materials-NIJ Standard 0108.01,” 1985.
  11. S. Hernández, F. Sket, C. González, and J. LLorca, “Optimization of curing cycle in carbon fiber-reinforced laminates: void distribution and mechanical properties,” Composites Science and Technology, vol. 85, pp. 73–82, 2013. View at Publisher · View at Google Scholar
  12. F. de Borbón and D. Ambrosini, “Dynamic response of composites sandwich plates with carbon nanotubes subjected to blast loading,” Composites B: Engineering, vol. 45, no. 1, pp. 466–473, 2013. View at Publisher · View at Google Scholar
  13. D. Zhang, Y. Sun, L. Chen, S. Zhang, and N. Pan, “Influence of fabric structure and thickness on the ballistic impact behavior of Ultrahigh molecular weight polyethylene composite laminate,” Materials & Design, vol. 54, pp. 315–322, 2014. View at Google Scholar
  14. A. A. Ramadhan, A. R. Abu Talib, A. S. M. Rafie, and R. Zahari, “The behaviour of fibre-metal laminates under high velocity impact loading with different stacking sequences of Al alloy,” Applied Mechanics and Materials, vol. 225, pp. 213–218, 2012. View at Publisher · View at Google Scholar
  15. A. A. Ramadhan, A. R. Abu Talib, A. S. M. Rafie, and R. Zahari, “High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels,” Materials & Design, vol. 43, pp. 307–321, 2013. View at Google Scholar
  16. F. Bourrier, L. Dorren, and O. Hungr, “The use of ballistic trajectory and granular flow models in predicting rockfall propagation,” Earth Surface Processes and Landforms, vol. 38, no. 4, pp. 435–440, 2013. View at Publisher · View at Google Scholar
  17. E. Randjbaran, R. Zahari, D. L. Majid, N. A. Abdul Jalil, R. Vaghei, and R. Ahmadi, “The effects of stacking sequence layers of six layers composite materials in ballistic energy absorption,” International Journal of Material Science Innovations, vol. 1, no. 6, pp. 293–305, 2013. View at Google Scholar
  18. E. Randjbaran, R. Zahari, D. L. Majid, N. A. Abdul Jalil, R. Vaghei, and R. Ahmadi, “The effects of stacking sequence layers of hybrid composite materials in energy absorption under the high velocity ballistic impact conditions: an experimental investigation,” Journal of Material Sciences & Engineering, vol. 2, no. 4, article 130, 2013. View at Publisher · View at Google Scholar