Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 423979, 7 pages
Research Article

Simple BiCMOS CCCTA Design and Resistorless Analog Function Realization

Faculty of Engineering, King Mongkut’s Institute of Technology Ladkrabang (KMITL), Ladkrabang, Bangkok 10520, Thailand

Received 9 March 2014; Revised 2 June 2014; Accepted 18 June 2014; Published 16 July 2014

Academic Editor: Leopoldo Angrisani

Copyright © 2014 Worapong Tangsrirat. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Prokop and V. Musil, “New modern circuit block CCTA and some its applications,” in Proceedings of the 14th International Scientific and Applied Science Conference-Electronics (ET '05), pp. 93–98, Sofia, Bulgaria, 2005.
  2. N. Herencsar, J. Koton, and K. Vrba, “Single CCTA-based universal biquadratic filters employing minimum components,” International Journal of Computer and Electrical Engineering, vol. 1, no. 3, pp. 307–310, 2009. View at Google Scholar
  3. N. Pandey, S. Kapur, P. Arora, and S. Malhotra, “Novel voltage mode multifunction filter based on current conveyor transconductance amplifier,” International Journal on Control System and Instrumentation, vol. 2, no. 1, pp. 42–45, 2011. View at Google Scholar
  4. A. Lahiri, “Explicit-current-output quadrature oscillator using second-generation current conveyor transconductance amplifier,” Radioengineering, vol. 18, no. 4, pp. 522–526, 2009. View at Google Scholar · View at Scopus
  5. R. Sotner, J. Jerabek, R. Prokop, and K. Vrba, “Current gain controlled CCTA and its application in quadrature oscillator and direct frequency modulator,” Radioengineering, vol. 20, no. 1, pp. 317–326, 2011. View at Google Scholar · View at Scopus
  6. M. Siripruchyanun and W. Jaikla, “Current controlled current conveyor transconductance amplifier (CCCCTA): a building block for analog signal processing,” Electrical Engineering, vol. 90, no. 6, pp. 443–453, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. W. Jaikla, A. Noppakarn, and S. Lawanwisut, “New gain controllable resistor-less current-mode first order allpass filter and its application,” Radioengineering, vol. 21, no. 1, pp. 312–316, 2012. View at Google Scholar · View at Scopus
  8. W. Jaikla, S. Siripongdee, and P. Suwanjan, “MISO current-mode biquad filter with independent control of pole frequency and quality factor,” Radioengineering, vol. 21, no. 3, pp. 886–891, 2012. View at Google Scholar · View at Scopus
  9. A. Jantakun and W. Sa-Ngiamvibool, “Current-mode sinusoidal oscillator using current controlled current conveyor transconductance amplifier,” Revue Roumaine des Sciences Techniques, vol. 58, no. 4, pp. 415–423, 2013. View at Google Scholar
  10. M. Ismail and T. Fiez, Analog VLSI Signal and Information Processing, McGraw-Hill, 1994.
  11. A. S. Sedra and K. C. Smith, Microelectronic Circuit, Oxford University Press, New York, NY, USA, 5th edition, 2005.
  12. E. W. Greeneich, Analog Integrated Circuits, Chapman & Hall, New York, NY, USA, 1997.