Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 503749, 6 pages
http://dx.doi.org/10.1155/2014/503749
Research Article

Study on Dielectric Function Models for Surface Plasmon Resonance Structure

Photonics Research Group, Department of Electrical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 1 November 2013; Accepted 16 December 2013; Published 30 January 2014

Academic Editors: C.-F. Lin and P. N. Lisboa Filho

Copyright © 2014 Peyman Jahanshahi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Zourob and A. Lakhtakia, Optical Guided-Wave Chemical and Biosensors I, Springer, 2010.
  2. Y. Luo, F. Yu, and R. N. Zare, “Microfluidic device for immunoassays based on surface plasmon resonance imaging,” Lab on a Chip, vol. 8, no. 5, pp. 694–700, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. B. Liedberg, C. Nylander, and I. Lundstrom, “Biosensing with surface plasmon resonance—how it all started,” Biosensors and Bioelectronics, vol. 10, no. 8, pp. 1–9, 1995. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Zhang and L. Zhang, “Nanostructures for surface plasmons,” Advances in Optics and Photonics, vol. 4, no. 2, pp. 157–321, 2012. View at Publisher · View at Google Scholar
  5. A. Hakonen, “Fluorescence ratiometric properties induced by nanoparticle plasmonics and nanoscale dye dynamics,” The Scientific World Journal, vol. 2013, Article ID 624505, 6 pages, 2013. View at Publisher · View at Google Scholar
  6. P. Berini, “Long-range surface plasmon polaritons,” Advances in Optics and Photonics, vol. 1, no. 3, pp. 484–588, 2009. View at Publisher · View at Google Scholar
  7. P. Jahanshahi, E. Zalnezhad, S. D. Sekaran, and F. R. M. Adikan, “Rapid immunoglobulin M-based dengue diagnostic test using surface plasmon resonance biosensor,” Scientific Reports, vol. 4, article 3851, 2014. View at Publisher · View at Google Scholar
  8. P. M. Boltovets and B. A. Snopok, “Measurement uncertainty in analytical studies based on surface plasmon resonance,” Talanta, vol. 80, no. 2, pp. 466–472, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Neff, W. Zong, A. M. N. Lima, M. Borre, and G. Holzhüter, “Optical properties and instrumental performance of thin gold films near the surface plasmon resonance,” Thin Solid Films, vol. 496, no. 2, pp. 688–697, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Dalacu and L. Martinu, “Optical properties of discontinuous gold films: finite-size effects,” Journal of the Optical Society of America B, vol. 18, no. 1, pp. 85–92, 2001. View at Google Scholar · View at Scopus
  11. B. Lahiri, S. G. McMeekin, R. M. de la Rue, and N. P. Johnson, “Resonance hybridization in nanoantenna arrays based on asymmetric split-ring resonators,” Applied Physics Letters, vol. 98, no. 15, Article ID 153116, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Lahiri, R. Dylewicz, R. M. de la Rue, and N. P. Johnson, “Impact of titanium adhesion layers on the response of arrays of metallic split-ring resonators (SRRs),” Optics Express, vol. 18, no. 11, pp. 11202–11208, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Lahiri, A. Z. Khokhar, R. M. de la Rue, S. G. Mcmeekin, and N. P. Johnson, “Asymmetric split ring resonators for optical sensing of organic materials,” Optics Express, vol. 17, no. 2, pp. 1107–1115, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. L. Liu, Z. Han, and S. He, “Novel surface plasmon waveguide for high integration,” Optics Express, vol. 13, no. 17, pp. 6645–6650, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. K. R. Hiremath, L. Zschiedrich, and F. Schmidt, “Numerical solution of nonlocal hydrodynamic Drude model for arbitrary shaped nano-plasmonic structures using Nédélec finite elements,” Journal of Computational Physics, vol. 231, no. 17, pp. 5890–5896, 2012. View at Publisher · View at Google Scholar
  16. S. R. Karlsen, K. S. Johnston, R. C. Jorgenson, and S. S. Yee, “Simultaneous determination of refractive index and absorbance spectra of chemical samples using surface plasmon resonance,” Sensors and Actuators B, vol. 25, no. 1–3, pp. 747–749, 1995. View at Google Scholar · View at Scopus
  17. S. I. Bozhevolnyi and T. Søndergaard, “General properties of slow-plasmon resonant nanostructures: nano-antennas and resonators,” Optics Express, vol. 15, no. 17, pp. 10869–10877, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Sidorenko and O. J. F. Martin, “Resonant tunneling of surface plasmon-polaritons,” Optics Express, vol. 15, no. 10, pp. 6380–6388, 2007. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Louarn, T. Makiabadi, V. le Nader, and M. Kanso, Fibre-Optic Microsensor Based on Surface Plasmon Resonance in a Microfluidic Cell: An Experimental and Numerical Multiphysics Approach, 2010.
  20. P. Jahanshahi, M. Ghomeishi, and F. R. M. Adikan, “Adhesive layer effect on gold-silica thin film interfaces for surface plasmon resonance modeling,” in Proceedings of the 3rd IEEE International Conference in Photonics (ICP '12), pp. 89–92, 2012. View at Publisher · View at Google Scholar
  21. H. Y. Li, S. M. Zhou, J. Li et al., “Analysis of the Drude model in metallic films,” Applied Optics, vol. 40, no. 34, pp. 6307–6311, 2001. View at Google Scholar · View at Scopus
  22. S. Huang, Z. Wang, J. Xu, D. Lu, and T. Yuan, “Determination of optical constants of functional layer of online Low-E glass based on the Drude theory,” Thin Solid Films, vol. 516, no. 10, pp. 3179–3183, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. V. Geraldo, L. V. A. Scalvi, P. N. Lisboa-Filho, and C. Morilla-Santos, “Drude's model calculation rule on electrical transport in Sb-doped SnO2 thin films, deposited via sol-gel,” Journal of Physics and Chemistry of Solids, vol. 67, no. 7, pp. 1410–1415, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. T. V. Amotchkina, M. K. Trubetskov, A. V. Tikhonravov, V. Janicki, J. Sancho-Parramon, and H. Zorc, “Comparison of two techniques for reliable characterization of thin metal-dielectric films,” Applied Optics, vol. 50, no. 33, pp. 6189–6197, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. T. V. Amotchkina, V. Janicki, J. Sancho-Parramon, A. V. Tikhonravov, M. K. Trubetskov, and H. Zorc, “General approach to reliable characterization of thin metal films,” Applied Optics, vol. 50, no. 10, pp. 1453–1464, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. A. D. Rakić, A. B. Djurišić, J. M. Elazar, and M. L. Majewski, “Optical properties of metallic films for vertical-cavity optoelectronic devices,” Applied Optics, vol. 37, no. 22, pp. 5271–5283, 1998. View at Google Scholar · View at Scopus
  27. M. Kadi, A. Smaali, and R. Outemzabet, “Analysis of optical and related properties of tin oxide thin films determined by Drude-Lorentz model,” Surface and Coatings Technology, vol. 211, pp. 45–49, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. G. B. Smith, A. I. Maaroof, and A. Gentle, “Homogenized Lorentz-Drude optical response in highly nanoporous conducting gold layers produced by de-alloying,” Optics Communications, vol. 271, no. 1, pp. 263–268, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. S. D'Elia, N. Scaramuzza, F. Ciuchi, C. Versace, G. Strangi, and R. Bartolino, “Ellipsometry investigation of the effects of annealing temperature on the optical properties of indium tin oxide thin films studied by Drude-Lorentz model,” Applied Surface Science, vol. 255, no. 16, pp. 7203–7211, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. A. Vázquez-Guardado, G. Lopez-Galmiche, I. de Leon, J. J. Sanchez-Mondragon, and R. W. Boyd, “Finite lorentzian-like gain in the analysis of gain assisted slow surface plasmon-polaritons,” in Proceedings of the Frontiers in Optics/Laser Science XXVIII, Rochester, NY, USA, October 2012. View at Publisher · View at Google Scholar
  31. R. Brendel and D. Bormann, “An infrared dielectric function model for amorphous solids,” Journal of Applied Physics, vol. 71, no. 1, pp. 1–6, 1992. View at Publisher · View at Google Scholar · View at Scopus
  32. O. Stenzel, S. Wilbrandt, A. Stendal, U. Beckers, K. Voigtsberger, and C. von Borczyskowski, “The incorporation of metal clusters into thin organic dye layers as a method for producing strongly absorbing composite layers: an oscillator model approach to resonant metal cluster absorption,” Journal of Physics D, vol. 28, no. 10, pp. 2154–2162, 1995. View at Publisher · View at Google Scholar
  33. A. B. Djurišić, T. Fritz, and K. Leo, “Modelling the optical constants of organic thin films: impact of the choice of objective function,” Journal of Optics A, vol. 2, no. 5, pp. 458–464, 2000. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Sancho-Parramon, V. Janicki, and H. Zorc, “Tuning the effective dielectric function of thin film metal-dielectric composites by controlling the deposition temperature,” Journal of Nanophotonics, vol. 5, no. 1, Article ID 051805, 8 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Vial and T. Laroche, “Description of dispersion properties of metals by means of the critical points model and application to the study of resonant structures using the FDTD method,” Journal of Physics D, vol. 40, no. 22, pp. 7152–7158, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. F. D. Nunes, B. H. V. Borges, and J. Weiner, “Analysis of dispersive and dissipative media with optical resonances,” Optics Express, vol. 20, no. 14, pp. 15679–15691, 2012. View at Publisher · View at Google Scholar
  37. A. Vial, “Implementation of the critical points model in the recursive convolution method for modelling dispersive media with the finite-difference time domain method,” Journal of Optics A, vol. 9, no. 7, article 029, pp. 745–748, 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. E. D. Palik, Handbook of Optical Constants of Solids, Academic Press, 1998.
  39. S. J. Moon, T. W. Noh, S. Nakatsuji, Y. Maeno, and J. S. Lee, “Extended Drude model analysis on multiband Ca2-xSrxRuO4 compounds,” Physica C, vol. 460–462, pp. 516–517, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. J. A. C. Weideman, “Computation of the complex error function,” SIAM Journal on Numerical Analysis, vol. 31, no. 5, pp. 1497–1518, 1994. View at Google Scholar · View at Scopus
  41. T. Fritz, K. Leo, and A. B. Djurišić, “Modelling the optical constants of organic thin films: impact of the choice of objective function,” Journal of Optics A, vol. 2, no. 5, p. 458, 2000. View at Publisher · View at Google Scholar
  42. L. G. Schulz and F. R. Tangherlini, “Optical constants of silver, gold, copper, and aluminum. II. The index of refraction n,” Journal of the Optical Society of America, vol. 44, no. 5, pp. 362–368, 1954. View at Publisher · View at Google Scholar
  43. L. G. Schulz, “The optical constants of silver, gold, copper, and aluminum. I. The absorption coefficient k,” Journal of the Optical Society of America, vol. 44, no. 5, pp. 357–362, 1954. View at Publisher · View at Google Scholar
  44. I. H. Malitson, “Interspecimen comparison of the refractive index of fused silica,” Journal of the Optical Society of America, vol. 55, no. 10, pp. 1205–1208, 1965. View at Publisher · View at Google Scholar
  45. SCHOTT Optical Glass Datasheets, “SCHOTT,” 2012, http://www.us.schott.com/.
  46. E. van Stryland, M. Bass, C. DeCusatis et al., Handbook of Optics, Volume IV: Optical Properties of Materials, Nonlinear Optics, Quantum Optics (Set), McGraw Hill Professional, 3rd edition, 2009.