Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 589543, 10 pages
http://dx.doi.org/10.1155/2014/589543
Research Article

Numerical Study on Influence of Cross Flow on Rewetting of AHWR Fuel Bundle

1Reactor Safety Division, Bhabha Atomic Research Centre, Mumbai, India
2Raja Ramanna Fellow, Bhabha Atomic Research Centre, Mumbai, India
3Indian Institute of Technology, Roorkee, India

Received 27 August 2013; Accepted 27 October 2013; Published 2 February 2014

Academic Editors: M. L. Ferrari and A. Greco

Copyright © 2014 Mithilesh Kumar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Yamanouchi, “Effect of core spray cooling in transient state after loss of coolant accident,” Journal of Nuclear Science and Technology, vol. 5, no. 11, pp. 547–558, 1968. View at Google Scholar
  2. M. W. E. Coney, “Calculations on the rewetting of hot surfaces,” Nuclear Engineering and Design, vol. 31, no. 2, pp. 246–259, 1975. View at Google Scholar · View at Scopus
  3. R. B. Duffey and D. T. C. Porthouse, “The physics of rewetting in water reactor emergency core cooling,” Nuclear Engineering and Design, vol. 25, no. 3, pp. 379–394, 1973. View at Google Scholar · View at Scopus
  4. C. L. Tien and L. S. Yao, “Analysis of conduction-controlled rewetting of a vertical surface,” Journal of Heat Transfer, vol. 97, no. 2, pp. 161–172, 1975. View at Google Scholar · View at Scopus
  5. J. M. Blair, “An analytical solution to a two-dimensional model of the rewetting of a hot dry rod,” Nuclear Engineering and Design, vol. 32, no. 2, pp. 159–170, 1975. View at Google Scholar · View at Scopus
  6. A. K. Satapathy and R. K. Sahoo, “Analysis of rewetting of an infinite tube by numerical fourier inversion,” International Communications in Heat and Mass Transfer, vol. 29, no. 2, pp. 279–288, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Castiglia, E. Oliveri, S. Taibi, and G. Vella, “Procedure for correlating experimental and theoretical results in the rewetting of hot surfaces,” Heat and Technology, vol. 5, no. 3-4, pp. 82–99, 1987. View at Google Scholar · View at Scopus
  8. T. S. Thompson, “An analysis of the wet-side heat-transfer coefficient during rewetting of a hot dry patch,” Nuclear Engineering and Design, vol. 22, no. 2, pp. 212–224, 1972. View at Google Scholar · View at Scopus
  9. V. V. Raj and A. W. Date, “Analysis of conduction controlled rewetting of hot surfaces based on two region model,” in Proceedings of 8th International Heat transfer Conference, San Francisco, Calif, USA, 1987.
  10. E. R. G. Eckert and R. M. Drake, Heat and Mass Transfer, McGraw Hill, New York, NY, USA, 2nd edition, 1959.
  11. T. R. Goodman, “The heat balance integral and its application to problems involving a change of phase,” Journal of Heat Transfer, vol. 80, pp. 335–342, 1958. View at Google Scholar
  12. N. D. Patil, P. K. Das, S. Bhattacharyya, and S. K. Sahu, “An experimental assessment of cooling of a 54-rod bundle by in-bundle injection,” Nuclear Engineering and Design, vol. 250, pp. 500–511, 2012. View at Google Scholar
  13. R. K. Sinha and A. Kakodkar, “Design and development of the AHWR-the Indian thorium fuelled innovative nuclear reactor,” Nuclear Engineering and Design, vol. 236, no. 7-8, pp. 683–700, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. D. W. Peaceman and H. H. Rachford, “The numerical solution of parabolic and elliptic differential equations,” Journal of the Society for Industrial and Applied Mathematics, vol. 3, pp. 28–41, 1955. View at Google Scholar
  15. P. L. T. Brian, “A finite difference method of higher-order accuracy for the solution of three- dimensional transient heat conduction problems,” AIChE Journal, vol. 7, pp. 367–370, 1961. View at Google Scholar
  16. J. Douglas Jr., “Alternating direction methods for three space variables,” Numerische Mathematik, vol. 4, no. 1, pp. 41–63, 1962. View at Publisher · View at Google Scholar · View at Scopus
  17. M. J. Chang, L. C. Chow, and W. S. Chang, “Improved alternating-direction implicit method for solving transient three-dimensional heat diffusion problems,” Numerical Heat Transfer B, vol. 19, no. 1, pp. 69–84, 1991. View at Google Scholar · View at Scopus
  18. J. Thibault, “Three-dimensional numerical method based on the superposition principle,” Numerical Heat Transfer, vol. 7, no. 2, pp. 127–145, 1984. View at Google Scholar · View at Scopus
  19. S. Glasstone and A. Sesonske, Nuclear Reactor Engineering, Reactor System Engineering, vol. 2.
  20. J. P. Tyagi, M. Kumar, H. G. Lele, and P. Munshi, “Large break LOCA analysis of a natural circulation reactor,” in Proceedings of the ANS Annual Meeting and Embedded Topical Meetings, pp. 631–633, San Diego, Calif, USA, June 2010. View at Scopus