Table of Contents Author Guidelines Submit a Manuscript
Table of Contents Alerts

To receive news and publication updates for The Scientific World Journal, enter your email address in the box below.

The Scientific World Journal
Volume 2014 (2014), Article ID 596364, 7 pages
http://dx.doi.org/10.1155/2014/596364
Research Article

Effects of Using Silica Fume and Polycarboxylate-Type Superplasticizer on Physical Properties of Cementitious Grout Mixtures for Semiflexible Pavement Surfacing

Suhana Koting,1 Mohamed Rehan Karim,1 Hilmi Mahmud,1 Nuha S. Mashaan,1 Mohd Rasdan Ibrahim,1 Herdayati Katman,1,2 and Nadiah Md Husain1

1Centre for Transportation Research, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
2Universiti Tenaga Nasional, Putrajaya Campus, Jalan Ikram-Uniten, 43000 Kajang, Selangor, Malaysia

Received 23 August 2013; Accepted 12 October 2013; Published 2 January 2014

Academic Editors: F. Pacheco-Torgal and İ. B. Topçu

Copyright © 2014 Suhana Koting et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Koting, M. R. Karim, and H. B. Mahmud, “The Properties of bituminous mixtures for semi-flexible pavement,” in Proceedings of the Eastern Asia Society for Transportation Studies, vol. 6, Dalian, China, September 2007.
  2. (PIARC) W. R. A. PIARC Dictionary, World Road Association (PIARC), Paris, France, 2011, http://www.piarc.org/en/terminology.
  3. S. Tayfur, H. Ozen, and A. Aksoy, “Investigation of rutting performance of asphalt mixtures containing polymer modifiers,” Construction and Building Materials, vol. 21, no. 2, pp. 328–337, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. A. H. Ali, N. S. Mashaan, and M. R. Karim, “Investigations of physical and rheological properties of aged rubberised bitumen,” Advances in Materials Science and Engineering, vol. 2013, Article ID 239036, 7 pages, 2013. View at Publisher · View at Google Scholar
  5. EucoDensit, Densiphalt Handbook, EucoDensit, Cleveland, Ohio, USA, 2004.
  6. S. S. AG, Sika ViscoCrete-25 MP High Performance Superplasticiser, Sika Services AG, Zurich, Switzerland, 2006.
  7. ASTM C 305-99, Standard Practice For Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM, West Conshohocken, Pa, USA, 1999.
  8. S. E. Zoorob, K. E. Hassan, and A. Setyawan, “Cold mix, cold laid semi-flexible grouted macadams, mix design and properties,” in Proceedings of the 4th European Symposium on Performance of Bituminous and Hydraulic Materials in Pavements, Nottingham, UK, April 2002.
  9. Public Works Department, Description of Workmanship and Materials (Semi-Rigid Pavement) Section E, City Hall Kuala Lumpur, Kuala Lumpur, Malaysia, 2003.
  10. O. S. B. Al-Amoudi, M. Maslehuddin, M. Ibrahim, M. Shameem, and M. H. Al-Mehthel, “Performance of blended cement concretes prepared with constant workability,” Cement and Concrete Composites, vol. 33, no. 1, pp. 90–102, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Koting, H. B. Mahmud, and M. R. Karim, “Influence of superplasticizer type and dosage on the workability and strength of cementitious grout for semi-flexible pavement application,” Journal of Eastern Asia Society for Transportation Studies, vol. 6, pp. 2156–2167, 2007. View at Google Scholar
  12. S. Chandra and J. Björnström, “Influence of cement and superplasticizers type and dosage on the fluidity of cement mortars—Part I,” Cement and Concrete Research, vol. 32, no. 10, pp. 1605–1611, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. L. G. Baltazar, F. M. A. Henriques, and F. Jorne, “Optimisation of flow behaviour and stability of superplasticized fresh hydraulic lime grouts through design of experiments,” Construction and Building Materials, vol. 35, pp. 838–845, 2012. View at Google Scholar
  14. A. Neville, Properties of Concrete, Pearson Prentice Hall, 1995.
  15. R. Siddique, M. I. Khan, and M. Iqbal Khan, Silica Fume. Supplementary Cementing Materials, Springer, Berlin, Germany, 2011.
  16. S. Materials, “Silica fume,” Scancem Materials, 2005, http://www.scancemmaterials.com/pdf/silica/CSF%20General.pdf.
  17. C.-L. Lee, R. Huang, W.-T. Lin, and T.-L. Weng, “Establishment of the durability indices for cement-based composite containing supplementary cementitious materials,” Materials and Design, vol. 37, pp. 28–39, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Davraz and L. Gunduz, “Engineering properties of amorphous silica as a new natural pozzolan for use in concrete,” Cement and Concrete Research, vol. 35, no. 7, pp. 1251–1261, 2005. View at Publisher · View at Google Scholar · View at Scopus