Predicting Welding Distortion in a Panel Structure with Longitudinal Stiffeners Using Inherent Deformations Obtained by Inverse Analysis Method

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr class="thead"><td align="left">Method</td><td align="center">Longitudinal shrinkage (mm)</td><td align="center">Transverse shrinkage (mm)</td><td align="center">Longitudinal bending (rad)</td><td align="center">Transverse bending (angular distortion) (rad)</td></tr><tr><td class="thead-hr" colspan="5"><hr/></td></tr><tr><td align="left">Inverse analysis</td><td align="center">−0.1</td><td align="center">−0.22</td><td align="center">0.0003</td><td align="center">0.024</td></tr><tr class="table-tr"><td colspan="5"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Inherent deformations in the fillet jount.

The Scientific World Journal

tab1

Table 1

Table 1: Predicting Welding Distortion in a Panel Structure with Longitudinal Stiffeners Using Inherent Deformations Obtained by Inverse Analysis Method 

Table 1 | Predicting Welding Distortion in a Panel Structure with Longitudinal Stiffeners Using Inherent Deformations Obtained by Inverse Analysis Method 