Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 612608, 11 pages
http://dx.doi.org/10.1155/2014/612608
Research Article

Deflection of Resilient Materials for Reduction of Floor Impact Sound

1Department of Civil and Environmental System Engineering, Sungkyunkwan University, Suwon 440-746, Republic of Korea
2Department of Global Construction Engineering, Sungkyunkwan University, Suwon 440-746, Republic of Korea

Received 23 May 2014; Accepted 8 September 2014; Published 28 October 2014

Academic Editor: Massimo Pellizzari

Copyright © 2014 Jung-Yoon Lee and Jong-Mun Kim. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Korea Standards Association, KSF 2868, Determination of Dynamic Stiffness of Material Used under Floating Floors in Dwellings, Korea Standards Association, Seoul, Republic of Korea, 2003.
  2. Japanese Industrial Standard, “JIS A 6321, Rock wool isolating material for floating floors,” 2000.
  3. ISO 9052-1, “Acoustics-determination of dynamic stiffness—part 1: materials used under floating floors in dwellings,” 1989.
  4. ACT Parliamentary Counsel, “Environment Protection Act 1997,” 1997.
  5. A. Elmallawany, “Field investigations of the sound insulation in school buildings,” Building and Environment, vol. 18, no. 1-2, pp. 85–89, 1983. View at Publisher · View at Google Scholar · View at Scopus
  6. C. Buratti and E. Moretti, “Impact noise reduction: laboratory and field measurements of different materials performances,” in Proceedings of the 6th European Conference on Noise Control: Advanced Solutions for Noise Control (EURONOISE '06), Tampere, Finland, June 2006. View at Scopus
  7. H. S. Kim, P.-H. Jin, S.-W. Joo, and S.-W. Jung, “A study on the dynamic properties by loading time of floor impact noise insulation materials,” in Proceedings of the Annual Autumn Conference of the Korean Society for Noise and Vibration Engineering, pp. 942–945, 2005.
  8. T. Cho, “Vibro-acoustic characteristics of floating floor system: the influence of frequency-matched resonance on low frequency impact sound,” Journal of Sound and Vibration, vol. 332, no. 1, pp. 33–42, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Cho, “Experimental and numerical analysis of floating floor resonance and its effect on impact sound transmission,” Journal of Sound and Vibration, vol. 332, no. 25, pp. 6552–6561, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. C.-J. Yu and J. Kang, “Environmental impact of acoustic materials in residential buildings,” Building and Environment, vol. 44, no. 10, pp. 2166–2175, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. M. L. Munjal, “Response of a multilayered infinite plate to an oblique plane wave by means of transfer matrices,” Journal of Sound and Vibration, vol. 162, no. 2, pp. 333–343, 1993. View at Publisher · View at Google Scholar · View at Scopus
  12. Housing and Urban Research Institute (HURI), “A study on the development of the structural analysis method for floor heating system with sound insulation,” Tech. Rep., Seoul, Republic of Korea, 2005. View at Google Scholar
  13. K.-W. Kim, G.-C. Jeong, K.-S. Yang, and J.-Y. Sohn, “Correlation between dynamic stiffness of resilient materials and heavyweight impact sound reduction level,” Building and Environment, vol. 44, no. 8, pp. 1589–1600, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. A. C. Ugural, Stresses in Plates and Shells, McGraw-Hill, New York, NY, USA, 1999.
  15. R. G. Caverson, P. Waldron, and M. S. Williams, “Review of vibration guidelines for suspended concrete slabs,” Canadian Journal of Civil Engineering, vol. 21, no. 6, pp. 931–938, 1994. View at Publisher · View at Google Scholar · View at Scopus
  16. KS F 4039 Standard, Foamed Concrete for Cast-in-Site, Korean Standards Association, Seoul, Republic of Korea, 2009.
  17. ASTM, Standard Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel. C234-91a, American Society for Testing and Materials, West Conshohocken, Pa, USA, 1991.
  18. A. C. Ugural and S. K. Fenster, Advanced Strength and Applied Elasticity, Prentice Hall PTR, Englewood Cliffs, NJ, USA, 3rd edition, 1995.
  19. J.-Y. Lee, S.-C. Lee, S.-H. Choi, A.-R. Lim, J.-S. Park, and J.-M. Kim, “Structural behavior of resilient materials subjected to short-term load and long-term load,” International Journal of Engineering & Technology, vol. 6, no. 1, pp. 65–69, 2014. View at Google Scholar
  20. A. Belarbi and T. T. C. Hsu, “Constitutive laws of softened concrete in biaxial tension-compression,” ACI Structural Journal, vol. 92, no. 5, pp. 562–573, 1995. View at Google Scholar · View at Scopus