Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 650683, 11 pages
http://dx.doi.org/10.1155/2014/650683
Research Article

Thermophysical and Mechanical Properties of Granite and Its Effects on Borehole Stability in High Temperature and Three-Dimensional Stress

1Key Laboratory on Deep Geo-Drilling Technology of the Ministry of Land and Resources, China University of Geosciences, Beijing 100083, China
2State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China
3State Key Laboratory of Petroleum Resource and Prospecting, China University of Petroleum, Beijing 102249, China

Received 29 August 2013; Accepted 30 December 2013; Published 20 March 2014

Academic Editors: C. Nah and A. Tonkikh

Copyright © 2014 Wang Yu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. S. Aadnoy, “Introduction to special issue on borehole stability,” Journal of Petroleum Science and Engineering, vol. 38, no. 3-4, pp. 79–82, 2003. View at Google Scholar
  2. B. S. Aadnøy and M. Belayneh, “Elasto-plastic fracturing model for wellbore stability using non-penetrating fluids,” Journal of Petroleum Science and Engineering, vol. 45, no. 3-4, pp. 179–192, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. J. S. Bell, “Practical methods for estimating in situ stresses for borehole stability applications in sedimentary basins,” Journal of Petroleum Science and Engineering, vol. 38, no. 3-4, pp. 111–119, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Wang and M. B. Dusseault, “A coupled conductive-convective thermo-poroelastic solution and implications for wellbore stability,” Journal of Petroleum Science and Engineering, vol. 38, no. 3-4, pp. 187–198, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. M. D. Zoback, C. A. Barton, M. Brudy et al., “Determination of stress orientation and magnitude in deep wells,” International Journal of Rock Mechanics and Mining Sciences, vol. 40, no. 7-8, pp. 1049–1076, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. A. M. Al-Ajmi and R. W. Zimmerman, “Stability analysis of vertical boreholes using the Mogi-Coulomb failure criterion,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 8, pp. 1200–1211, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. T. Al-Bazali, J. Zhang, M. E. Chenevert, and M. M. Sharma, “Factors controlling the compressive strength and acoustic properties of shales when interacting with water-based fluids,” International Journal of Rock Mechanics and Mining Sciences, vol. 45, no. 5, pp. 729–738, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. M. Chen, M. E. Chenevert, and M. M. Sharma, “Chemical-mechanical boreholebore instability model in shale,” Journal of Petroleum Sciences and Technology, vol. 38, no. 34, pp. 167–176, 2003. View at Google Scholar
  9. J. C. Roegiers, “Well modeling: an overview,” Oil and Gas Science and Technology, vol. 57, no. 5, pp. 569–577, 2002. View at Google Scholar · View at Scopus
  10. E. Fjar, R. M. Holt, A. M. Raaen, R. Risnes, and P. Horsrud, Petroleum Related Rock Mechanics, Elsevier, 2nd edition, 2008.
  11. B. H. Wei, X. F. Lu, B. Y. Wang, J. Deng, and C. Liu, “Law of temperature influence on wellbore stability in hot well,” Drilling Fluid and Completion Fluid, vol. 21, no. 6, pp. 15–18, 2004. View at Google Scholar
  12. V. Maury and A. Guenot, “Practical advantages of mud cooling systems for drilling,” SPE Drillings & Completion, vol. 10, no. 1, pp. 42–48, 1995. View at Google Scholar
  13. H. F. Wang, B. P. Bonner, S. R. Carlson, B. J. Kowallis, and H. C. Heard, “Thermal stress cracking in granite,” Journal of Geophysical Research, vol. 94, no. 2, pp. 1745–1758, 1989. View at Google Scholar · View at Scopus
  14. Y. Chen, X. D. Wu, and F. Q. Zhang, “Tests on hot cracking of rock,” Chinese Science Bulletin, vol. 44, no. 8, pp. 880–883, 1999. View at Google Scholar
  15. N. Zhang, Y. Zhao, Z. Wan, F. Dong, and Z. Feng, “Experimental research on seepage laws of granite under thermal cracking action with 3D stress,” Chinese Journal of Rock Mechanics and Engineering, vol. 29, no. 1, pp. 118–123, 2010. View at Google Scholar · View at Scopus
  16. R. Narayanasamy, D. Bar, and A. Milne, “Wellbore instability predictions within the cretaceous mudstones, clair field, west of Shetlands,” in Proceedings of the Offshore Europe Oil and Gas Conference and Exhibition (OE '09), pp. 847–858, Aberdeen, UK, September 2009. View at Scopus
  17. P. A. Nawrocki, M. B. Dusseault, and R. K. Bratli, “Assessment of some semi-analytical models for non-linear modeling of borehole stresses,” International Journal of Rock Mechanical & Mining Science, vol. 35, no. 4-5, pp. 522–531, 2002. View at Google Scholar
  18. C. F. Tsang, Coupled Processes Associated with Nuclear Waste Repositories, Academic Press, New York, NY, USA, 1987.
  19. L. Jing and X. Feng, “Numerical modeling for coupled thermo-hydro-mechanical and chemical processes (THMC) of geological media—international and Chinese experiences,” Chinese Journal of Rock Mechanics and Engineering, vol. 22, no. 10, pp. 1704–1715, 2003. View at Google Scholar · View at Scopus
  20. J. A. Hudson, O. Stephansson, J. Andersson, C.-F. Tsang, and L. Jing, “Coupled T-H-M issues relating to radioactive waste repository design and performance,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 1, pp. 143–161, 2001. View at Publisher · View at Google Scholar · View at Scopus
  21. C.-F. Tsang, L. Jing, O. Stephansson, and F. Kautsky, “The DECOVALEX III project: a summary of activities and lessons learned,” International Journal of Rock Mechanics and Mining Sciences, vol. 42, no. 5-6, pp. 593–610, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Millard, A. Rejeb, M. Chijimatsu et al., “Numerical study of the THM effects on the near-field safety of a hypothetical nuclear waste repository—BMT1 of the DECOVALEX III project—part 2: effects of THM coupling in continuous and homogeneous rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 42, no. 5-6, pp. 731–744, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. Q. Wang, Y. Zhou, Y. Tang, and Z. Jiang, “Analysis of effect factor in shale wellbore stability,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, no. 1, pp. 171–179, 2012. View at Google Scholar · View at Scopus
  24. Q. Wang, Y. C. Zhou, G. Wang, H. W. Jiang, and Y. S. Liu, “A fluid-solid-chemistry coupling model for shale boreholebore stability,” Petroleum Exploration and Development, vol. 39, no. 4, pp. 475–480, 2012. View at Google Scholar
  25. J. Rutqvist, X. T. Feng, J. A. Hudson et al., “Multiple-code bench mark simulation study of coupled THMC processes in the excavation disturbed zone associated with geological nuclear waste repositories,” in Proceedings of the 2nd International Conference on Coupled T-H-M-C Processes in Geosystems: Fundamentals, Modeling, Experiments and Applications, pp. 22–24, Nanjing, China, 2006.
  26. J. Feng and J. Ding, “Radiator optimization of LED street lamp based on parameterized language APDL of ANSYS,” Semiconductor Photonics and Technology, vol. 16, no. 2-3, pp. 88–92, 2010. View at Google Scholar
  27. X. Yin, J. Li, and C. Wu, “ANSYS implementation of damping solvent stepwise extraction method for nonlinear seismic analysis of large 3-D structures,” Soil Dynamics and Earthquake Engineering, vol. 44, pp. 139–152, 2013. View at Google Scholar
  28. Y. H. Lu, M. Chen, Y. Jin, X. Q. Teng, W. Wu, and X. Q. Liu, “Experimental study of strength properties of deep mudstone under drilling fluid soaking,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, no. 7, pp. 1399–1405, 2012. View at Google Scholar
  29. S. Jia, X. Ran, Y. Wang et al., “Fully coupled thermal-hydraulic-mechanical model and finite element analysis for deformation porous media,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, supplement 2, pp. 3547–3556, 2012. View at Google Scholar
  30. D. W. Marshall and R. G. Bentsen, “A computer model to determine the temperature distributions in a wellbore,” The Journal of Canadian Petroleum Technology, vol. 21, no. 1, pp. 63–75, 1982. View at Google Scholar · View at Scopus
  31. C. Yan, J. Deng, and B. Yu, “Wellbore stability in oil and gas drilling with chemical-mechanical coupling,” The Scientific World Journal, vol. 2013, Article ID 720271, 9 pages, 2013. View at Publisher · View at Google Scholar