Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014 (2014), Article ID 681853, 11 pages
http://dx.doi.org/10.1155/2014/681853
Research Article

Articulated Arm Coordinate Measuring Machine Calibration by Laser Tracker Multilateration

Departamento de Ingeniería de Diseño y Fabricación, Edificio Torres Quevedo, EINA, Universidad de Zaragoza, 50018 Zaragoza, Spain

Received 27 August 2013; Accepted 3 November 2013; Published 29 January 2014

Academic Editors: G. Huang and D. Veeger

Copyright © 2014 Jorge Santolaria et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Piratelli-Filho and G. R. Lesnau, “Virtual spheres gauge for coordinate measuring arms performance test,” Measurement, vol. 43, no. 2, pp. 236–244, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Shimojima, R. Furutani, K. Takamasu, and K. Araki, “The estimation method of uncertainty of articulated coordinate measuring machine,” in Proceedings of the IEEE International Conference on Industrial Technology, pp. 411–415, Dubrovnik, Croatia, 2002.
  3. H. Hamana, M. Tominaga, M. Ozaki, and R. Furutani, “Calibration of articulated arm coordinate measuring machine considering measuring posture,” International Journal of Automation Technology, vol. 5, no. 2, pp. 109–114, 2011. View at Google Scholar · View at Scopus
  4. J. Sładek, K. Ostrowska, and A. Gąska, “Modeling and identification of errors of coordinate measuring arms with the use of a metrological model,” Measurement, vol. 46, no. 1, pp. 667–679, 2013. View at Publisher · View at Google Scholar
  5. J. Sładek, K. Ostrowska, and K. Gacek, “Kinematic metrological model of the coordinate measuring arm (MCMA),” in Proceedings of the 19th IMEKO World Congress Fundamental and Applied Metrology, pp. 1988–1992, Lisbon, Portugal, 2009.
  6. J. Denavit and R. S. Hartenberg, “A kinematic notation for lower-pair mechanisms based on matrices,” Transactions of ASME-Journal of Applied Mechanics, vol. 22, no. 1, pp. 215–221, 1955. View at Google Scholar
  7. M. Miroir, Y. Nguyen, J. Szewczyk, O. Sterkers, and A. Bozorg Grayeli, “Design, kinematic optimization, and evaluation of a teleoperated system for middle ear microsurgery,” The Scientific World Journal, vol. 2012, Article ID 907372, 19 pages, 2012. View at Publisher · View at Google Scholar
  8. T. W. Hsu and L. J. Everett, “Identification of the kinematic parameters of a robot manipulator for positional accuracy improvement,” in Proceedings of the Computation in Engineering Conference, pp. 263–267, Boston, Mass, USA, August 1985.
  9. B. W. Mooring, “The effect of joint axis misalignment on robot positioning accuracy,” in Proceedings of the Computers in engineering: International Computers in Engineering Conference and Exhibit, pp. 151–155, Chicago, Ill, USA, August 1983.
  10. H. Stone, A. Sanderson, and C. Neuman, “Arm signature identification,” in Proceedings of the IEEE International Conference on Robotics and Automation, pp. 41–48, San Francisco, Calif, USA, April 1986.
  11. L. J. Everett and A. H. Suryohadiprojo, “A study of kinematic models for forward calibration of manipulators,” in Proceedings of the IEEE International Conference on Robotics and Automation, pp. 798–800, Philadelphia, Pa, USA, April 1988.
  12. J. Chen and L. M. Chao, “Positioning error analysis for robot manipulators with all rotary joints,” IEEE Journal of Robotics and Automation, vol. RA-3, no. 6, pp. 539–545, 1987. View at Google Scholar · View at Scopus
  13. A. C. Majarena, J. Santolaria, D. Samper, and J. J. Aguilar, “An overview of kinematic and calibration models using internal/external sensors or constraints to improve the behavior of spatial parallel mechanisms,” Sensors, vol. 10, no. 11, pp. 10256–10297, 2010. View at Google Scholar
  14. I. Kovač and A. Frank, “Testing and calibration of coordinate measuring arms,” Precision Engineering, vol. 25, no. 2, pp. 90–99, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Zheng, C. Du, and Y. Hu, “Research on optimal measurement area of flexible coordinate measuring machines,” Measurement, vol. 45, no. 3, pp. 250–254, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Levenberg, “A method for the solution of certain non-linear problems in least squares,” Quarterly of Applied Mathematics, vol. 2, no. 2, pp. 164–168, 1944. View at Google Scholar
  17. Q. Gao, J. Chen, L. Wang, S. Xu, and Y. Hou, “Multiobjective optimization design of a fractional order PID controller for a gun control system,” The Scientific World Journal, vol. 2013, Article ID 907256, 8 pages, 2013. View at Publisher · View at Google Scholar
  18. J. Santolaria, J. Aguilar, J. Yagüe, and J. Pastor, “Kinematic parameter estimation technique for calibration and repeatability improvement of articulated arm coordinate measuring machines,” Precision Engineering, vol. 32, no. 4, pp. 251–268, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Koseki, T. Arai, K. Sugimoto, T. Takatuji, and M. Goto, “Design and accuracy evaluation of high-speed and high precision parallel mechanism,” in Proceedings of the 1998 IEEE International Conference on Robotics and Automation. Part 1 (of 4), pp. 1340–1345, May 1998. View at Scopus
  20. A. Piratelli-Filho, F. H. T. Fernandes, and R. V. Arencibia, “Application of virtual spheres plate for AACMMs evaluation,” Precision Engineering, vol. 36, no. 2, pp. 349–355, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Wang, L. Mastrogiacomo, F. Franceschini, and P. Maropoulos, “Experimental comparison of dynamic tracking performance of iGPS and laser tracker,” International Journal of Advanced Manufacturing Technology, vol. 56, no. 1–4, pp. 205–213, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. C. Lin and J. Her, “Calibrating the volumetric errors of a precision machine by a laser tracker system,” International Journal of Advanced Manufacturing Technology, vol. 26, no. 11-12, pp. 1255–1267, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Aguado, D. Samper, J. Santolaria, and J. J. Aguilar, “Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements,” International Journal of Machine Tools and Manufacture, vol. 53, no. 1, pp. 160–169, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Takatsuji, M. Goto, A. Kirita, T. Kurosawa, and Y. Tanimura, “The relationship between the measurement error and the arrangement of laser trackers in laser trilateration,” Measurement Science and Technology, vol. 11, no. 5, pp. 477–483, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. D. F. Zhang, S. Rolt, and P. G. Maropoulos, “Modelling and optimization of novel laser multilateration schemes for high-precision applications,” Measurement Science and Technology, vol. 16, no. 12, pp. 2541–2547, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. E. B. Hughes, A. Wilson, and G. N. Peggs, “Design of a high-accuracy CMM based on multi-lateration techniques,” CIRP Annals-Manufacturing Technology, vol. 49, no. 1, pp. 391–394, 2000. View at Google Scholar · View at Scopus
  27. S. W. Kim, H. G. Rhee, and J. Y. Chu, “Volumetric phase-measuring interferometer for three-dimensional coordinate metrology,” Precision Engineering, vol. 27, no. 2, pp. 205–215, 2003. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Santolaria, A. Brau, J. Velzquez, and J. J. Aguilar, “A self-centering active probing technique for kinematic parameter identification and verification of articulated arm coordinate measuring machines,” Measurement Science and Technology, vol. 21, no. 5, Article ID 055101, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. W. K. Kim, Y. K. Byun, and H. S. Cho, “Closed-form forward-position solution for a 6-DoF 3-PPSP parallel mechanism and its implementation,” International Journal of Robotics Research, vol. 20, no. 1, pp. 85–99, 2001. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Aguado, J. Santolaria, D. Samper, and J. Aguilar, “Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification,” Precision Engineering, vol. 37, pp. 929–943, 2013. View at Publisher · View at Google Scholar