Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 718765, 12 pages
http://dx.doi.org/10.1155/2014/718765
Research Article

Mechanical and Morphological Properties of Polypropylene/Nano α-Al2O3 Composites

1Department of Material Engineering, Maybod Branch, Islamic Azad University, Maybod, Iran
2Department of Chemical & Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia
3Ceramic Department, Material and Energy Research Center, Meshkin dasht, Karaj, Tehran 31787-316, Iran

Received 26 August 2013; Accepted 19 November 2013; Published 3 February 2014

Academic Editors: F. Findik and P. Fuschi

Copyright © 2014 F. Mirjalili et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [8 citations]

The following is the list of published articles that have cited the current article.

  • Rozman, Zuliahani, Rozyanty, Zhafer, and Musa, “Effect of Montmorillonite Modification on Ultra Violet Radiation Cured Nanocomposite Filled with Glycidyl Methacrylate Modified Kenaf,” IOP Conference Series: Materials Science and Engineering, vol. 133, no. 1, 2016. View at Publisher · View at Google Scholar
  • Nurgul Tankut, Timucin Bardak, Eser Sozen, and Ali Naci Tankut, “The effect of different nanoparticles and open time on bonding strength of poly (vinyl acetate) adhesive,” Measurement, vol. 81, pp. 80–84, 2016. View at Publisher · View at Google Scholar
  • Md A. Bhuiyan, Raghuram V. Pucha, and Kyriaki Kalaitzidou, “3D RVE Models Able to Capture and Quantify the Dispersion, Agglomeration, and Orientation State of CNT in CNT/PP Nanocomposites,” Frontiers in Materials, vol. 3, 2016. View at Publisher · View at Google Scholar
  • Fatemeh Mirjalili, Hossein Mohammadi, Mohammad Azimi, Masoud Hafezi, and Noor Azuan Abu Osman, “Synthesis and characterization of β-TCP/CNT nanocomposite: Morphology, microstructure and in vitro bioactivity,” Ceramics International, vol. 43, no. 10, pp. 7573–7580, 2017. View at Publisher · View at Google Scholar
  • Nagarajan Padmavathy, L.R. Jaidev, Suryasarathi Bose, and Kaushik Chatterjee, “Oligomer-grafted graphene in a soft nanocomposite augments mechanical properties and biological activity,” Materials & Design, vol. 126, pp. 238–249, 2017. View at Publisher · View at Google Scholar
  • Nurul Wahida Rusli, Mohamad Bashree Abu Bakar, Mohd Zharif Ahmad Thirmizir, Muhammad Azwadi Sulaiman, and Mohamad Najmi Masri, “Flexural and Morphology Properties of Kenaf Fibre Reinforcement Unsaturated Polymer Composite,” Materials Science Forum, vol. 888, pp. 193–197, 2017. View at Publisher · View at Google Scholar
  • Ali Naci Tankut, Nurgul Tankut, Deniz Aydemir, Eser Sozen, and Timucin Bardak, “The bending and tension strength of furniture joints bonded with polyvinyl acetate nanocomposites,” Maderas: Ciencia y Tecnologia, vol. 19, no. 1, pp. 51–62, 2017. View at Publisher · View at Google Scholar
  • Baris Kaynak, Martin Spoerk, Anuja Shirole, Wolfgang Ziegler, and Janak Sapkota, “Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing,” Macromolecular Materials and Engineering, pp. 1800037, 2018. View at Publisher · View at Google Scholar