Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 720157, 9 pages
Research Article

Characterization of the Polycaprolactone Melt Crystallization: Complementary Optical Microscopy, DSC, and AFM Studies

1Department of Industrial Engineering (DIIN), University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy
2Institute for Composite and Biomedical Materials (IMCB), National Research Council (CNR), Piazzale Enrico Fermi 1, 80055 Portici, Italy

Received 28 August 2013; Accepted 8 October 2013; Published 9 January 2014

Academic Editors: V. Amigó, P. Reis, and S. Wu

Copyright © 2014 V. Speranza et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Krzysztof Formela, Mariusz Marć, Jacek Namieśnik, and Bożena Zabiegała, “The estimation of total volatile organic compounds emissions generated from peroxide cured natural rubber/polycaprolactone blends,” Microchemical Journal, 2016. View at Publisher · View at Google Scholar
  • A. Policicchio, A. Meduri, C. Simari, V. Lazzaroli, S. Stelitano, R.G. Agostino, and I. Nicotera, “Assessment of commercial poly(ε-caprolactone) as a renewable candidate for carbon capture and utilization,” Journal of CO2 Utilization, vol. 19, pp. 185–193, 2017. View at Publisher · View at Google Scholar
  • Kuan-Lin Ku, Lisbeth Grøndahl, Hui Dao, Ke Du, Simon Puttick, Po-Liang Lai, Hui Peng, I-Ming Chu, and Andrew K. Whittaker, “In vitro degradation study of polyanhydride copolymers / surface grafted Hydroxyapatite composites for bone tissue application,” Polymer Degradation and Stability, 2017. View at Publisher · View at Google Scholar
  • Fengyuan Liu, Cian Vyas, Gowsihan Poologasundarampillai, Ian Pape, Sri Hinduja, Wajira Mirihanage, and Paulo Bartolo, “Structural Evolution of PCL during Melt Extrusion 3D Printing,” Macromolecular Materials and Engineering, pp. 1700494, 2017. View at Publisher · View at Google Scholar
  • Bryant Heimbach, Beril Tonyali, Dianyun Zhang, and Mei Wei, “High performance resorbable composites for load-bearing bone fixation devices,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 81, pp. 1–9, 2018. View at Publisher · View at Google Scholar
  • K. Bicy, V. G. Geethamma, Nandakumar Kalarikkal, Didier Rouxel, and Sabu Thomas, “Poly(ɛ-caprolactone)/Functionalized-Carbon Nanotube Electrospun Nanocomposites: Crystallization and Thermal Properties,” Macromolecular Symposia, vol. 381, no. 1, pp. 1800140, 2018. View at Publisher · View at Google Scholar
  • Maria Laura Di Lorenzo, René Androsch, Alicyn Marie Rhoades, and Maria Cristina Righetti, “Analysis of Polymer Crystallization by Calorimetry,” Recent Advances, Techniques and Applications, vol. 6, pp. 253–299, 2018. View at Publisher · View at Google Scholar