Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 736230, 9 pages
http://dx.doi.org/10.1155/2014/736230
Research Article

Mathematical Model Relating Uniaxial Compressive Behavior of Manufactured Sand Mortar to MIP-Derived Pore Structure Parameters

College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing, Jiangsu 210098, China

Received 21 April 2014; Accepted 3 June 2014; Published 15 July 2014

Academic Editor: F. Pacheco-Torgal

Copyright © 2014 Zhenghong Tian and Jingwu Bu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. R. Wakchaure, A. P. Shaikh, and B. E. Gite, “Effect of types of fine aggregate on mechanical properties of cement concrete,” International Journal of Modern Engineering Research, vol. 2, no. 5, pp. 3723–3726, 2012. View at Google Scholar
  2. D. D. Cortes, H.-K. Kim, A. M. Palomino, and J. C. Santamarina, “Rheological and mechanical properties of mortars prepared with natural and manufactured sands,” Cement and Concrete Research, vol. 38, no. 10, pp. 1142–1147, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. J. P. Gonçalves, L. M. Tavares, R. D. Toledo Filho, E. M. R. Fairbairn, and E. R. Cunha, “Comparison of natural and manufactured fine aggregates in cement mortars,” Cement and Concrete Research, vol. 37, no. 6, pp. 924–932, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Nanthagopalan and M. Santhanam, “Fresh and hardened properties of self-compacting concrete produced with manufactured sand,” Cement and Concrete Composites, vol. 33, no. 3, pp. 353–358, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Li, G. Ke, and M. Zhou, “Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete,” Construction and Building Materials, vol. 25, no. 10, pp. 3849–3853, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. V. Bhikshma, R. Kishore, and C. V. R. Patchi, “Investigations on flexural behavior of high strength manufactured sand concrete,” in Challenges, Opportunities and Solutions in Structural Engineering and Construction, pp. 511–519, CRC Press, 2010. View at Google Scholar
  7. S. Diamond, “A critical comparison of mercury porosimetry and capillary condensation pore size distributions of portland cement pastes,” Cement and Concrete Research, vol. 1, no. 5, pp. 531–545, 1971. View at Publisher · View at Google Scholar · View at Scopus
  8. S. H. Ahmad and S. P. Shah, “Stress-strain curves of concrete confined by spiral reinforcement,” ACI Journal Proceedings, vol. 79, no. 6, 1982. View at Google Scholar
  9. T. H. Wee, M. S. Chin, and M. A. Mansur, “Stress-strain relationship of high-strength concrete in compression,” Journal of Materials in Civil Engineering, vol. 8, no. 2, pp. 70–76, 1996. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Chen, S. Wu, and J. Zhou, “Strength values of cementitious materials in bending and in tension,” ASCE Journal of Materials in Civil Engineering, vol. 26, no. 3, pp. 484–490, 2014. View at Google Scholar
  11. X. Chen, S. Wu, and J. Zhou, “Quantification of dynamic tensile behavior of cement-based materials,” Construction and Building Materials, vol. 51, pp. 15–23, 2014. View at Publisher · View at Google Scholar
  12. X. Chen, S. Wu, J. Zhou, Y. Chen, and A. Qin, “Effect of testing method and strain rate on stress-strain behavior of concrete,” Journal of Materials in Civil Engineering, vol. 25, no. 11, pp. 1752–1761, 2013. View at Google Scholar
  13. X. Chen, S. Wu, and J. Zhou, “Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete,” Construction and Building Materials, vol. 47, pp. 419–430, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. X. Chen, S. Wu, and J. Zhou, “Experimental study and analytical formulation of mechanical behavior of concrete,” Construction and Building Materials, vol. 47, pp. 662–670, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. O. Deo and N. Neithalath, “Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features,” Materials Science and Engineering A, vol. 528, no. 1, pp. 402–412, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Taeun, Development of analytical model relating compressive strength in porous ceramics to MIP-derived microstructural parameters [Ph.D. thesis], University of Illinois at Urbana-Champaign, Urbana, Ill, USA, 1993.
  17. X. Chen, S. Wu, and J. Zhou, “Influence of porosity on compressive and tensile strength of cement mortar,” Construction and Building Materials, vol. 40, pp. 869–874, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. N. Neithalath, M. S. Sumanasooriya, and O. Deo, “Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction,” Materials Characterization, vol. 61, no. 8, pp. 802–813, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. ASTM C349, “Standard test method for compressive strength of hydraulic cement mortars,” ASTM C349-08, Ann book ASTM Stand 04.01.
  20. ASTM C642, Standard Test Method for Density, Absorption and Voids in Hardened Concrete, ASTM C642-97, Annual Book ASTM Standard 04.02, 2002.
  21. J. Jambor, “Pore structure and strength development of cement composites,” Cement and Concrete Research, vol. 20, no. 6, pp. 948–954, 1990. View at Publisher · View at Google Scholar · View at Scopus
  22. X. Chen and S. Wu, “Influence of water-to-cement ratio and curing period on pore structure of cement mortar,” Construction and Building Materials, vol. 38, pp. 804–812, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. S. C. Carniglia, “Working model for porosity effects on the uniaxial strength of ceramics,” Journal of the American Ceramic Society, vol. 55, no. 12, pp. 610–618, 1972. View at Publisher · View at Google Scholar · View at Scopus
  24. R. F. Feldman, “The effect of sand/cement ratio and silica fume on the microstructure of mortars,” Cement and Concrete Research, vol. 16, no. 1, pp. 31–39, 1986. View at Google Scholar · View at Scopus
  25. D. C. Okpala, “Pore structure of hardened cement paste and mortar,” International Journal of Cement Composites and Lightweight Concrete, vol. 11, no. 4, pp. 245–254, 1989. View at Publisher · View at Google Scholar · View at Scopus
  26. T. H. Almusallam and S. H. Alsayed, “Stress-strain relationship of normal, high-strength and lightweight concrete,” Magazine of Concrete Research, vol. 47, no. 170, pp. 39–44, 1995. View at Publisher · View at Google Scholar · View at Scopus
  27. L. S. Hsu and C. T. T. Hsu, “Complete stress—strain behaviour of high-strength concrete under compression,” Magazine of Concrete Research, vol. 46, no. 169, pp. 301–312, 1994. View at Publisher · View at Google Scholar · View at Scopus
  28. Z. H. Guo and X. Q. Zhang, “Experimental investigation of stress-strain curves for concrete, Chinese,” Journal of Building and Structure, vol. 3, no. 1, pp. 1–12, 1982 (Chinese). View at Google Scholar