Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 819083, 7 pages
http://dx.doi.org/10.1155/2014/819083
Research Article

Modelling and Laboratory Studies on the Adhesion Fatigue Performance for Thin-Film Asphalt and Aggregate System

1School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China
2School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150090, China

Received 18 April 2014; Accepted 28 May 2014; Published 19 June 2014

Academic Editor: Feipeng Xiao

Copyright © 2014 Dongsheng Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. G. Hicks, NCHRP Synthesis of Highway Practice 175: Moisture Damage in Asphalt Concrete, Transportation Research Board, National Research Council, Washington, DC, USA, 1991.
  2. M. Solaimanian, D. Fedor, R. Bonaquist, A. Soltani, and V. Tandon, “Simple performance test for moist ure damage prediction in asphalt concrete,” Journal of the Association of Asphalt Paving Technologists, vol. 75, pp. 345–380, 2006. View at Google Scholar
  3. A. Kvasnak, J. Moore, A. Taylor, and B. Prowell, “Preliminary evaluation of warm mix asphalt field demonstration: Franklin, Tennessee,” Tech. Rep. NCAT Report 10-01, National Center for Asphalt Technology, Auburn, Ala, USA, 2010. View at Google Scholar
  4. S. Caro, E. Masad, A. Bhasin, and D. N. Little, “Moisture susceptibility of asphalt mixtures, part 1: mechanisms,” International Journal of Pavement Engineering, vol. 9, no. 2, pp. 81–98, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Kanitpong and H. U. Bahia, “Role of adhesion and thin film thickness of asphalt binders in moisture damage of HMA,” Journal of the Association of Asphalt Paving Technologists, vol. 72, pp. 502–528, 2003. View at Google Scholar
  6. D. N. Little and D. Jones, “Chemical and mechanical mechanisms of moisture damage in hot mix asphalts pavements,” in Moisture Sensitivity of Asphalt Pavements: A National Seminar, San Diego, California, National Academies Press, Washington, DC, USA, 2003. View at Google Scholar
  7. A. W. Hefer, D. N. Little, and R. L. Lytton, “A synthesis of theories and mechanisms of bitumen-aggregate adhesion including recent advances in quantifying the effects of water,” Journal of the Association of Asphalt Paving Technologists, vol. 74, pp. 139–196, 2005. View at Google Scholar
  8. A. Bhasin, E. Masad, D. Little, and R. Lytton, “Limits on adhesive bond energy for improved resistance of hot-mix asphalt to moisture damage,” Transportation Research Record, no. 1970, pp. 3–13, 2006. View at Google Scholar · View at Scopus
  9. R. L. Lytton, E. A. Masad, C. Zollinger, R. Bulut, and D. Little, “Measurements of surface energy and its relationship to moisture damage,” Tech. Rep. FHWA/TX-05/0-4524-2, Texas Transportation Institute, 2005. View at Google Scholar
  10. A. R. Copeland, Influence of moisture on bond strength of asphalt-aggregate systems [Ph.D. dissertation], Vanderbilt University, 2007.
  11. K. Kanitpong and H. U. Bahia, “Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures,” in Proceedings of the TRB Annual Meeting, 2005.
  12. A. H. Abed, “Enhanced aggregate-asphalt adhesion and stability of local hot mix asphalt,” Engineering and Technical Journal, vol. 29, no. 10, pp. 2044–2059, 2011. View at Google Scholar
  13. T. Nguyen, E. Byrd, D. Bentz, and J. Seiler, “Development of a method for measuring water-stripping resistance of asphalt/siliceous aggregate mixtures,” Tech. Rep. NCHRPID-002, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, DC, USA, 1996. View at Google Scholar
  14. J. Youtcheff and V. Aurilio, “Moisture sensitivity of asphalt binders: evaluation and modeling of the pneumatic adhesion test tesults,” in Proceedings of the 42nd Annual Conference of Canadian Technical Asphalt Association, Polyscience Publications, Ottawa, Canada, 1997.
  15. L. Mo, M. Huurman, S. Wu, and A. A. A. Molenaar, “Ravelling investigation of porous asphalt concrete based on fatigue characteristics of bitumen-stone adhesion and mortar,” Materials and Design, vol. 30, no. 1, pp. 170–179, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Huurman and L. T. Mo, “Fatigue in mortar and adhesive zones, measurements, test interpretation and determination of model parameters,” Tech. Rep. 7-07-170-2, Laboratory of Road and Railway Engineering, Delft University of Technology, Delft, The Netherlands, 2007. View at Google Scholar
  17. P. S. Kandhal and S. Chakraborty, “Evaluation of voids in the mineral aggregate for HMA paving mixtures,” NCAT Report 96-4, National Center for Asphalt Technology, 1996. View at Google Scholar
  18. W. H. Campen, J. R. Smith, L. G. Erickson, and L. R. Mertz, “The relationship between voids, surface area, film thickness, and stability in bituminous paving mixtures,” Proceedings of the Association of Asphalt Paving Technologists, vol. 28, 1959. View at Google Scholar
  19. J. Shen, Performance of Asphalt and Asphalt Mixtures, China Communications Press, 2003.
  20. A. R. Tarrer and V. Wagh, “The effect of the physical and chemical characteristics of the aggregate on bonding,” Tech. Rep. SHRP-A/UIR-91-507, Strategic Highway Research Program, National Research Council, Washington, DC, USA, 1991. View at Google Scholar