Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 898536, 16 pages
http://dx.doi.org/10.1155/2014/898536
Research Article

The Effect of Different Parameters on the Development of Compressive Strength of Oil Palm Shell Geopolymer Concrete

Department of Civil Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 1 July 2014; Accepted 27 August 2014; Published 28 October 2014

Academic Editor: Fabrizio Scala

Copyright © 2014 Ramin Hosseini Kupaei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [11 citations]

The following is the list of published articles that have cited the current article.

  • Thong, Teo, and Ng, “Chloride Penetration Profile of Polyvinyl Alcohol (PVA) Treated Oil Palm Shell (OPS) Concrete,” CONCREEP 2015: Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures - Proceedings of the 10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, pp. 1129–1136, 2015. View at Publisher · View at Google Scholar
  • S. M. Alamgir Kabir, U. Johnson Alengaram, Mohd Zamin Jumaat, Afia Sharmin, and Azizul Islam, “Influence of Molarity and Chemical Composition on the Development of Compressive Strength in POFA Based Geopolymer Mortar,” Advances in Materials Science and Engineering, vol. 2015, pp. 1–15, 2015. View at Publisher · View at Google Scholar
  • Elijah Adesanya, Katja Ohenoja, Paivo Kinnunen, and Mirja Illikainen, “Alkali Activation of Ladle Slag from Steel-Making Process,” Journal of Sustainable Metallurgy, 2016. View at Publisher · View at Google Scholar
  • F. Allali, E. Joussein, N. Idrissi Kandri, and S. Rossignol, “The influence of calcium content on the performance of metakaolin-based geomaterials applied in mortars restoration,” Materials & Design, 2016. View at Publisher · View at Google Scholar
  • C. C. Thong, D. C. L. Teo, and C. K. Ng, “Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior,” Construction And Building Materials, vol. 107, pp. 172–180, 2016. View at Publisher · View at Google Scholar
  • Nicoletta Toniolo, and Aldo R. Boccaccini, “Fly ash-based geopolymers containing added silicate waste. A review,” Ceramics International, 2017. View at Publisher · View at Google Scholar
  • Mohammed Haloob Al-Majidi, Andreas Lampropoulos, and Andrew B. Cundy, “Steel fibre reinforced geopolymer concrete (SFRGC) with improved microstructure and enhanced fibre-matrix interfacial properties,” Construction and Building Materials, vol. 139, pp. 286–307, 2017. View at Publisher · View at Google Scholar
  • Taveri, Hurle, Roether, Ercole, Boccaccini, Toniolo, and Dlouhý, “Fly-ash-based geopolymers: How the addition of recycled glass or red mud waste influences the structural and mechanical properties,” Journal of Ceramic Science and Technology, vol. 8, no. 3, pp. 411–419, 2017. View at Publisher · View at Google Scholar
  • G. Mallikarjuna Rao, and T. D. Gunneswara Rao, “A quantitative method of approach in designing the mix proportions of fly ash and GGBS-based geopolymer concrete,” Australian Journal of Civil Engineering, pp. 1–11, 2018. View at Publisher · View at Google Scholar
  • N. Toniolo, A. Rincón, Y.S. Avadhut, M. Hartmann, E. Bernardo, and A.R. Boccaccini, “Novel geopolymers incorporating red mud and waste glass cullet,” Materials Letters, 2018. View at Publisher · View at Google Scholar
  • Hassan Rashidian-Dezfouli, Prasada Rao Rangaraju, and Venkat Sai Kumar Kothala, “Influence of selected parameters on compressive strength of geopolymer produced from ground glass fiber,” Construction and Building Materials, vol. 162, pp. 393–405, 2018. View at Publisher · View at Google Scholar