Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 906151, 10 pages
http://dx.doi.org/10.1155/2014/906151
Research Article

The New Performance Calculation Method of Fouled Axial Flow Compressor

1Department of Mechanical Engineering, North China Electric Power University, Baoding, Hebei 071003, China
2School of Energy, Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China

Received 4 March 2014; Revised 22 July 2014; Accepted 22 July 2014; Published 13 August 2014

Academic Editor: Xinping Zhou

Copyright © 2014 Huadong Yang and Hong Xu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. S. Diakunchak, “Performance deterioration in industrial gas turbines,” Journal of Engineering for Gas Turbines and Power, vol. 114, no. 2, pp. 161–168, 1992. View at Publisher · View at Google Scholar · View at Scopus
  2. G. F. Aker and H. I. H. Saravanamuttoo, “Predicting gas turbine performance degradation due to compressor fouling using computer simulation techniques,” Journal of Engineering for Gas Turbines and Power, vol. 111, no. 2, pp. 343–350, 1989. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Rodriguez, D. Sanchez, R. Chacartegui, A. Munoz, and G. S. Martinez, “Compressor fouling: a comparison of different fault distributions using a “stage-stacking” technique,” ASME Turbo Expo, vol. 2, 12 pages, 2013. View at Publisher · View at Google Scholar
  4. B. D. MacIsaac, Engine Performance and Health Monitoring Models Using Steady State and Transient Prediction Methods, AGARD-LS-183, Advisory Group for Aerospace Research and Development, 1992.
  5. A. P. Tarabrin, “An analysis of axial compressor fouling and cleaning method of their blading,” ASME Paper 96-GT-363, 1996. View at Google Scholar
  6. F. Melino, A. Peretto, and P. R. Spina, “Development and validation of a model for axial compressor fouling simulation,” in Proceedings of the ASME Turbo Expo 2010: Power for Land, Sea, and Air (GT '10), pp. 87–98, June 2010. View at Scopus
  7. E. Mohammadi and M. Montazeri-Gh, “Simulation of full and part-load performance deterioration of industrial two-shaft gas turbine,” ASME Journal of Engineering for Gas Turbines and Power, vol. 136, no. 9, Article ID 092602, 9 pages, 2014. View at Google Scholar
  8. D. E. Muir, H. I. H. Saravanamutoo, and D. J. Marshall, “Health monitoring of variable geometry gas turbines for the Canadian Navy,” ASME Journal of Engineering for Gas Turbines and Power, vol. 111, no. 2, pp. 244–250, 1989. View at Publisher · View at Google Scholar · View at Scopus
  9. A. R. Howell and R. P. Bonham, “Overall and stage characteristics of axial flow compressors,” ARCHIVE Proceedings of the Institution of Mechanical Engineers, vol. 163, pp. 235–248, 1950. View at Google Scholar
  10. D. M. Sandercock, K. Kovach, and S. Lieblein, “Experimental investigation of a five stage axial flow compressor with transonic rotors in all stages ; part I: compressor design,” Tech. Rep. RM E54F24, NACA, 1954. View at Google Scholar
  11. D. M. Sandercock, K. Kovach, and S. Lieblein, Experimental Investigation of a Five Stage Axial Flow Compressor with Transonic Rotors in All Stages. Part II: Compressor Overall Performance, NACA Research Memorandum, 1954.
  12. D. M. Sandercock, K. Kovach, and S. Lieblein, “Experimental investigation of a five stage axial flow compressor with transonic rotors in all stages; part III: interstage data and individual stage performance characteristics,” NACA RM E56924, 1954. View at Google Scholar
  13. A. P. Tarabrin, V. A. Schurovsky, A. I. Bodrov, and J.-P. Stalder, “Influence of axial compressor fouling on gas turbine unit performance based on different schemes and with different initial parameters,” in Proceedings of the International Gas Turbine & Aeroengine Congress & Exhibition, pp. 1–6, June 1998. View at Scopus
  14. A. Y. Cherkez, Engineering Calculation of Gas Turbine Engines by Small Deviations Method, Machinostroenie, Moscow, Russia, 1965.
  15. W. T. Ma, Y. W. Liu, and M. Su, “New scaling method for compressor maps using average infinitesimal stage,” Chinese Journal of Mechanical Engineering, vol. 20, no. 6, pp. 24–28, 2007. View at Publisher · View at Google Scholar · View at Scopus