Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2014, Article ID 959510, 16 pages
http://dx.doi.org/10.1155/2014/959510
Research Article

Volumetric Verification of Multiaxis Machine Tool Using Laser Tracker

Department of Design and Manufacturing Engineering, University of Zaragoza, Marìa de Luna 3, 50018 Zaragoza, Spain

Received 8 January 2014; Accepted 19 March 2014; Published 19 June 2014

Academic Editor: Raffaele Di Gregorio

Copyright © 2014 Sergio Aguado et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. A. Barakat, M. A. Elbestawi, and A. D. Spence, “Kinematic and geometric error compensation of a coordinate measuring machine,” International Journal of Machine Tools and Manufacture, vol. 40, no. 6, pp. 833–850, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Weckenmann and N. Petrovic, “Comparison of CMM length measurement tests conducted with different 1D, 2D and 3D standards,” in Proceedings of the 2nd International Scientific Conference on Metrology in Production Engineering, pp. 113–117, Lublin, Poland, 2005.
  3. H. J. Pahk, Y. S. Kim, and J. H. Moon, “A new technique for volumetric error assessment of CNC machine tools incorporating ball bar measurement and 3D volumetric error model,” International Journal of Machine Tools and Manufacture, vol. 37, no. 11, pp. 1583–1596, 1997. View at Google Scholar · View at Scopus
  4. H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine, “Geometric error measurement and compensation of machines: an update,” CIRP Annals—Manufacturing Technology, vol. 57, no. 2, pp. 660–675, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. S. H. H. Zargarbashi and J. R. R. Mayer, “Assessment of machine tool trunnion axis motion error, using magnetic double ball bar,” International Journal of Machine Tools and Manufacture, vol. 46, no. 14, pp. 1823–1834, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. ISO 230-1:1996, “Test code for machine tools—part 1: geometric accuracy of machines operating under no-load or finishing conditions,” ISO.
  7. J. S. Chen, T. W. Kou, and S. H. Chiou, “Geometric error calibration of multi-axis machines using an auto-alignment laser interferometer,” Precision Engineering, vol. 23, no. 4, pp. 243–252, 1999. View at Publisher · View at Google Scholar · View at Scopus
  8. H. F. F. Castro, “A method for evaluating spindle rotation errors of machine tools using a laser interferometer,” Measurement, vol. 41, no. 5, pp. 526–537, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. H. F. F. Castro and M. Burdekin, “Dynamic calibration of the positioning accuracy of machine tools and coordinate measuring machines using a laser interferometer,” International Journal of Machine Tools and Manufacture, vol. 43, no. 9, pp. 947–954, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Santolaria, J. Aguilar, J. Yagüe, and J. Pastor, “Kinematic parameter estimation technique for calibration and repeatability improvement of articulated arm coordinate measuring machines,” Precision Engineering, vol. 32, no. 4, pp. 251–268, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Tsutsumi and A. Saito, “Identification and compensation of systematic deviations particular to 5-axis machining centers,” International Journal of Machine Tools and Manufacture, vol. 43, no. 8, pp. 771–780, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. M. A. Donmez, D. S. Blomquist, R. J. Hocken, C. R. Liu, and M. M. Barash, “A general methodology for machine tool accuracy enhancement by error compensation,” Precision Engineering, vol. 8, no. 4, pp. 187–196, 1986. View at Google Scholar · View at Scopus
  13. P. D. Lin and K. F. Ehmann, “Direct volumetric error evaluation for multi-axis machines,” International Journal of Machine Tools and Manufacture, vol. 33, no. 5, pp. 675–693, 1993. View at Google Scholar · View at Scopus
  14. G. Zhang, R. Veale, T. Charlton, B. Borchardt, and R. Hocken, “Error compensation of coordinate measuring machines,” CIRP Annals—Manufacturing Technology, vol. 34, no. 1, pp. 445–448, 1985. View at Publisher · View at Google Scholar · View at Scopus
  15. J. W. M. C. Teeuwsen, J. A. Soons, P. H. J. Schellekens, and A. C. H. van der Wolf, “A general method for error description of CMMs using polynomial fitting procedures,” CIRP Annals—Manufacturing Technology, vol. 38, no. 1, pp. 505–510, 1989. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Mou and C. R. Liu, “A method for enhancing the accuracy of CNC machine tools for on-machine inspection,” Journal of Manufacturing Systems, vol. 11, no. 4, pp. 229–237, 1992. View at Google Scholar · View at Scopus
  17. S. Aguado, D. Samper, J. Santolaria, and J. J. Aguilar, “Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements,” International Journal of Machine Tools and Manufacture, vol. 53, no. 1, pp. 160–169, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Aguado, D. Samper, J. Santolaria, and J. J. Aguilar, “Towards an effective identification strategy in volumetric error compensation of machine tools,” Measurement Science and Technology, vol. 23, no. 6, Article ID 065003, 12 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. C. Brecher and F. Hoffmann, “Multi-criteria comparison of standardized kinematic structure for machine-tools,” in Proceedings of the 5th Chemnitz Parallel Kinematics Seminar, Wissenschaftliche Skripten, Chemnitz, Germany, 2006.
  20. A. H. Slocum, Precision Machine Design, Society of Manufacturing Engineers, 1992.
  21. H. Zhuang, S. H. Motaghedi, Z. S. Roth, and Y. Bai, “Calibration of multi-beam laser tracking systems,” Robotics and Computer-Integrated Manufacturing, vol. 19, no. 4, pp. 301–315, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Tong, E. A. Lehtihet, and S. Joshi, “Software compensation of rapid prototyping machines,” Precision Engineering, vol. 28, no. 3, pp. 280–292, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Aguado, J. Santolaria, D. Samper, and J. J. Aguilar, “Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification,” Precision Engineering, vol. 37, no. 4, pp. 929–943, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Lin and Y. Shen, “Modelling of five-axis machine tool metrology models using the matrix summation approach,” International Journal of Advanced Manufacturing Technology, vol. 21, no. 4, pp. 243–248, 2003. View at Publisher · View at Google Scholar · View at Scopus
  25. A. C. Okafor and Y. M. Ertekin, “Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics,” International Journal of Machine Tools and Manufacture, vol. 40, no. 8, pp. 1199–1213, 2000. View at Publisher · View at Google Scholar · View at Scopus
  26. J. P. Kruth, P. Vanherck, and L. de Jonge, “Self-calibration method and software error correction for three-dimensional coordinate measuring machines using artefact measurements,” Measurement, vol. 14, no. 2, pp. 157–167, 1994. View at Google Scholar · View at Scopus
  27. M. Nakajima, Note on Chebyshev Regression, University of Illinois, 2006.
  28. A. Ranganathan, “The Levenberg-Marquardt Algorithm,” 2004.
  29. K. C. Wiens, “Basic Tutorial on Linear Regression and Fourier Analysis,” 2010.
  30. C. Rong-Yeu and W. Maw-Ling, “Parameter identification via shifted Legendre polynomials,” International Journal of Systems Science, vol. 13, no. 10, pp. 1125–1135, 1982. View at Publisher · View at Google Scholar