Table of Contents Author Guidelines Submit a Manuscript
The Scientific World Journal
Volume 2015, Article ID 861954, 14 pages
http://dx.doi.org/10.1155/2015/861954
Research Article

Damping Estimation from Free Decay Responses of Cables with MR Dampers

1Structural Engineering Research Laboratory, Swiss Federal Laboratories for Materials Science and Technology (Empa), Überlandstrasse 129, 8600 Dübendorf, Switzerland
2Maurer Söhne GmbH & Co. KG, Frankfurter Ring 193, 80807 München, Germany

Received 14 January 2015; Accepted 19 February 2015

Academic Editor: Vincenzo Gattulli

Copyright © 2015 Felix Weber and Hans Distl. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Q. Ni, X. Y. Wang, Z. Q. Chen, and J. M. Ko, “Field observations of rain-wind-induced cable vibration in cable-stayed Dongting Lake Bridge,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 95, no. 5, pp. 303–328, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. Z. Savor, J. Radic, and G. Hrelja, “Cable vibrations at Dubrovnik bridge,” Bridge Structures, vol. 2, no. 2, pp. 97–106, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. J. R. Casas and A. C. Aparicio, “Rain-wind-induced cable vibrations in the Alamillo cable-stayed bridge (Sevilla, Spain). Assessment and remedial action,” Structure and Infrastructure Engineering, vol. 6, no. 5, pp. 549–556, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Matsumoto, T. Saitoh, M. Kitazawa, H. Shirato, and T. Nishizaki, “Response characteristics of rain-wind induced vibration of stay-cables of cable-stayed bridges,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 57, no. 2-3, pp. 323–333, 1995. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Zuo and N. P. Jones, “Interpretation of field observations of wind- and rain-wind-induced stay cable vibrations,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 98, no. 2, pp. 73–87, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Li, Z. Chen, T. Wu, and A. Kareem, “Rain-wind-induced in-plane and out-of-plane vibrations of stay cables,” Journal of Engineering Mechanics, vol. 139, no. 12, pp. 1688–1698, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Fujino and D. Siringoringo, “Vibration mechanisms and controls of long-span bridges: a review,” Structural Engineering International, vol. 23, no. 3, pp. 248–268, 2013. View at Google Scholar
  8. M. H. El Ouni, N. Ben Kahla, and A. Preumont, “Numerical and experimental dynamic analysis and control of a cable stayed bridge under parametric excitation,” Engineering Structures, vol. 45, pp. 244–256, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. Fédération Internationale du Béton, Acceptance of Stay Cable Systems Using Prestressing Steels, vol. 30 of Bulletin: International Federation for Structural Concrete, International Federation for Structural Concrete, 2005.
  10. F. Bossens, “Active tendon control of cable-stayed bridges: a large-scale demonstration,” Earthquake Engineering and Structural Dynamics, vol. 30, no. 7, pp. 961–979, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. B. M. Pacheco, Y. Fujino, and A. Sulekh, “Estimation curve for modal damping in stay cables with viscous damper,” Journal of Structural Engineering, vol. 119, no. 6, pp. 1961–1979, 1993. View at Google Scholar · View at Scopus
  12. S. Krenk, “Vibrations of a taut cable with an external damper,” Transactions ASME—Journal of Applied Mechanics, vol. 67, no. 4, pp. 772–776, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. J. A. Main and N. P. Jones, “Free vibrations of taut cable with attached damper. I: linear viscous damper,” Journal of Engineering Mechanics, vol. 128, no. 10, pp. 1062–1071, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. F. Weber, G. Feltrin, M. Maślanka, W. Fobo, and H. Distl, “Design of viscous dampers targeting multiple cable modes,” Engineering Structures, vol. 31, no. 11, pp. 2797–2800, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. N. Hoang and Y. Fujino, “Multi-mode control performance of nonlinear dampers in stay cable vibrations,” Structural Control and Health Monitoring, vol. 16, no. 7-8, pp. 860–868, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Bournand and J. Crigler, “The VSL friction damper for cable-stayed bridges. Some results from maintenance and testing on long cables,” in Proceedings of 6th International Conference on Cable Dynamics, pp. 199–204, Charleston, SC, USA, September 2005.
  17. F. Weber, J. Høgsberg, and S. Krenk, “Optimal tuning of amplitude proportional Coulomb friction damper for maximum cable damping,” Journal of Structural Engineering, vol. 136, no. 2, pp. 123–134, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. J. M. Ko, G. Zheng, Z. Q. Chen, and Y. Q. Ni, “Field vibration tests of bridge stay cables incorporated with magneto-rheological (MR) dampers,” in Smart Structures and Materials 2002: Smart Systems for Bridges, Structures, and Highways, vol. 4696 of Proceedings of SPIE, pp. 30–40, San Diego, Calif, USA, March 2002. View at Publisher · View at Google Scholar · View at Scopus
  19. I.-H. Kim, H.-J. Jung, and J.-H. Koo, “Experimental evaluation of a self-powered smart damping system in reducing vibrations of a full-scale stay cable,” Smart Materials and Structures, vol. 19, no. 11, Article ID 115027, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. J.-J. Lee, J.-M. Kim, S.-S. Ahn, and J.-S. Choi, “Development of a cable exciter to evaluate damping ratios of a stay cable,” KSCE Journal of Civil Engineering, vol. 14, no. 3, pp. 363–370, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. H. J. Zhou and L. M. Sun, “Damping of stay cable with passive-on magnetorheological dampers: a full-scale test,” International Journal of Civil Engineering, vol. 11, no. 3, pp. 154–159, 2013. View at Google Scholar · View at Scopus
  22. F. Weber and C. Boston, “Energy based optimization of viscous-friction dampers on cables,” Smart Materials and Structures, vol. 19, no. 4, Article ID 045025, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. F. Weber, H. Distl, G. Feltrin, and M. Motavalli, “Cycle energy control of magnetorheological dampers on cables,” Smart Materials and Structures, vol. 18, no. 1, Article ID 015005, 16 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Maślanka, B. Sapinski, and J. Snamina, “Experimental study of vibration control of a cable with an attached MR damper,” Journal of Theoretical and Applied Mechanics, vol. 45, no. 4, pp. 893–917, 2007. View at Google Scholar
  25. F. Weber and H. Distl, “Amplitude and frequency independent cable damping of Sutong Bridge and Russky Bridge by MR dampers,” Structural Control and Health Monitoring, vol. 22, no. 2, pp. 237–254, 2015. View at Publisher · View at Google Scholar
  26. Y. F. Duan, Y. Q. Ni, and J. M. Ko, “State-derivative feedback control of cable vibration using semiactive magnetorheological dampers,” Computer-Aided Civil and Infrastructure Engineering, vol. 20, no. 6, pp. 431–449, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. R. E. Christenson, B. F. Spencer Jr., and E. A. Johnson, “Experimental verification of smart cable damping,” Journal of Engineering Mechanics, vol. 132, no. 3, pp. 268–278, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. F. Duan, Y. Q. Ni, and J. M. Ko, “Cable vibration control using magnetorheological dampers,” Journal of Intelligent Material Systems and Structures, vol. 17, no. 4, pp. 321–325, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Li, M. Liu, J. Li, X. Guan, and J. Ou, “Vibration control of stay cables of the shandong binzhou yellow river highway bridge using magnetorheological fluid dampers,” Journal of Bridge Engineering, vol. 12, no. 4, pp. 401–409, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. H. Li, M. Liu, and J. Ou, “Negative stiffness characteristics of active and semi-active control systems for stay cables,” Structural Control and Health Monitoring, vol. 15, no. 2, pp. 120–142, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. W. J. Wu and C. S. Cai, “Cable vibration control with a semiactive MR damper-numerical simulation and experimental verification,” Structural Engineering and Mechanics, vol. 34, no. 5, pp. 611–623, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. C. Boston, F. Weber, and L. Guzzella, “Optimal semi-active damping of cables: evolutionary algorithms and closed-form solutions,” Smart Materials and Structures, vol. 18, no. 5, Article ID 055006, 9 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. F. Weber and C. Boston, “Clipped viscous damping with negative stiffness for semi-active cable damping,” Smart Materials and Structures, vol. 20, no. 4, Article ID 045007, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. F. Weber, “Bouc-Wen model-based real-time force tracking scheme for MR dampers,” Smart Materials and Structures, vol. 22, no. 4, Article ID 045012, 12 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  35. F. Weber, C. Boston, and M. Maślanka, “An adaptive tuned mass damper based on the emulation of positive and negative stiffness with an MR damper,” Smart Materials and Structures, vol. 20, no. 1, Article ID 015012, 2011. View at Publisher · View at Google Scholar · View at Scopus
  36. F. Weber and M. Maślanka, “Precise stiffness and damping emulation with MR dampers and its application to semi-active tuned mass dampers of Wolgograd Bridge,” Smart Materials and Structures, vol. 23, no. 1, Article ID 015019, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. H. Bachmann, W. J. Ammann, F. Deischl et al., Vibration Problems in Structures: Practical Guidelines, Birkhäuser, Basel, Switzerland, 1995.
  38. C. Glaeser, W. Brand, E. Kuhn, and T. MacK, “Testing, monitoring and maintenance of parallel strand cables—example: elbe bridge schoenebeck,” Beton- und Stahlbetonbau, vol. 109, no. 7, pp. 463–472, 2014. View at Google Scholar
  39. N. Hoang and Y. Fujino, “Analytical study on bending effects in a stay cable with a damper,” Journal of Engineering Mechanics, vol. 133, no. 11, pp. 1241–1246, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. C. Boston, F. Weber, and L. Guzzella, “Optimal semi-active damping of cables with bending stiffness,” Smart Materials and Structures, vol. 20, no. 5, Article ID 055005, 2011. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Liu and G. Zhang, “Damping of stay cable-passive damper system with effects of cable bending stiffness and damper stiffness,” Applied Mechanics and Materials, vol. 204-208, pp. 4513–4517, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. D.-H. Dan, Y.-Y. Chen, and R. Xiao, “On damping optimization of stay cable-damper system in consideration of design and implementation factors,” Journal of Vibration Engineering, vol. 27, no. 2, pp. 246–254, 2014. View at Google Scholar · View at Scopus
  43. F. Weber, “Robust force tracking control scheme for MR dampers,” Structural Control and Health Monitoring. In press.
  44. H. Wang, A. Li, J. Niu, Z. Zong, and J. Li, “Long-term monitoring of wind characteristics at Sutong Bridge site,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 115, pp. 39–47, 2013. View at Publisher · View at Google Scholar · View at Scopus
  45. Y. L. Xu and Z. Yu, “Mitigation of three-dimensional vibration of inclined sag cable using discrete oil dampers—II. Application,” Journal of Sound and Vibration, vol. 214, no. 4, pp. 675–693, 1998. View at Publisher · View at Google Scholar · View at Scopus
  46. F. Magalhães, E. Caetano, Á. Cunha, O. Flamand, and G. Grillaud, “Ambient and free vibration tests of the Millau Viaduct: evaluation of alternative processing strategies,” Engineering Structures, vol. 45, pp. 372–384, 2012. View at Publisher · View at Google Scholar · View at Scopus
  47. S. Li, Z. Chen, T. Wu, and A. Kareem, “Rain-wind-induced in-plane and out-of-plane vibrations of stay cables,” Journal of Engineering Mechanics, vol. 139, no. 12, pp. 1688–1698, 2013. View at Publisher · View at Google Scholar · View at Scopus
  48. D. Zuo and N. P. Jones, “Interpretation of field observations of wind- and rain-wind-induced stay cable vibrations,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 98, no. 2, pp. 73–87, 2010. View at Publisher · View at Google Scholar · View at Scopus
  49. F. Weber, “Design of a passive two dash-pot damping system for spatial cable vibrations,” Smart Materials and Structures, vol. 22, no. 6, Article ID 067001, p. 5, 2013. View at Publisher · View at Google Scholar · View at Scopus
  50. H. Zhou, L. Sun, and F. Xing, “Damping of full-scale stay cable with viscous damper: experiment and analysis,” Advances in Structural Engineering, vol. 17, no. 2, pp. 265–274, 2014. View at Publisher · View at Google Scholar · View at Scopus
  51. S. Krenk and J. R. Høgsberg, “Damping of cables by a transverse force,” Journal of Engineering Mechanics, vol. 131, no. 4, pp. 340–348, 2005. View at Publisher · View at Google Scholar · View at Scopus