Table of Contents
X-Ray Optics and Instrumentation
Volume 2010, Article ID 784732, 9 pages
http://dx.doi.org/10.1155/2010/784732
Research Article

Elliptically Bent X-Ray Mirrors with Active Temperature Stabilization

1Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA
2Center for X-Ray Optics, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA
3Ikawamachi Board of Education, Minamiakitagun, Akitaken 018-1516, Japan
4Helmholtz Zentrum Berlin für Materialien und Energie, Elektronenspeicherring BESSY-II, Albert-Einstein-Str. 15, 12489 Berlin, Germany

Received 30 January 2010; Accepted 9 July 2010

Academic Editor: Ali Khounsary

Copyright © 2010 Sheng Yuan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Assoufid, O. Hignette, M. Howells, S. Irick, H. Lammert, and P. Takacs, “Future metrology needs for synchrotron radiation grazing-incidence optics,” Nuclear Instruments and Methods in Physics Research Section A, vol. 467-468, pp. 267–270, 2001. View at Publisher · View at Google Scholar
  2. A. Erko, M. Idir, T. Krist, and A. G. Michette, Eds., Modern Developments in X-ray and Neutral Optics, Springer, Berlin, Germany, 2007.
  3. P. Kirkpatrick and A. V. Baez, “Formation of Optical Images by X-rays,” Journal of the Optical Society of America, vol. 38, no. 9, pp. 766–774, 1948. View at Google Scholar
  4. C. Liu, L. Assoufid, R. Conley, A. T. Macrander, G. E. Ice, and J. Z. Tischler, “Profile coating and its application for Kirkpatrick-Baez mirrors,” Optical Engineering, vol. 42, no. 12, pp. 3622–3628, 2003. View at Publisher · View at Google Scholar
  5. H. Yumoto, H. Mimura, S. Matsuyama et al., “Fabrication of elliptically figured mirror for focusing hard X Rays to size less than 50 nm,” Review of Scientific Instruments, vol. 76, no. 6, Article ID 063708, 5 pages, 2005. View at Publisher · View at Google Scholar
  6. F. Siewert, H. Lammert, T. Noll et al., “Advanced metrology, an essential support for the surface finishing of high performance X-ray optics,” in Advances in Metrology for X-ray and EUV Optics, vol. 5921 of Proceedings of SPIE, San Diego, Calif, USA, August 2005. View at Publisher · View at Google Scholar
  7. S. Yuan and J. Sasian, “Aberrations of anamorphic optical systems. I: the first-order foundation and method for deriving the anamorphic primary aberration coefficients,” Applied Optics, vol. 48, no. 13, pp. 2574–2584, 2009. View at Publisher · View at Google Scholar
  8. S. Yuan and J. Sasian, “Aberrations of anamorphic optical systems. II. primary aberration theory for cylindrical anamorphic systems,” Applied Optics, vol. 48, no. 15, pp. 2836–2841, 2009. View at Publisher · View at Google Scholar
  9. M. R. Howells, D. Cambie, R. M. Duarte et al., “Theory and practice of elliptically bent X-ray mirrors,” Optical Engineering, vol. 39, no. 10, pp. 2748–2762, 2000. View at Publisher · View at Google Scholar
  10. P. Z. Takacs, “X-ray mirror metrology,” in Handbook of Optics, M. Bass, Ed., vol. 5, chapter 46, McGraw–Hill, New York, NY, USA, 3rd edition, 2009. View at Google Scholar
  11. F. Siewert, H. Lammert, and T. Zeschke, “The nanometer optical component measuring machine,” in Modern Developments in X-ray and Neutron Optic, A. Erko, M. Idir, T. Krist, and A. G. Michette, Eds., Springer, Berlin, Germany, 2008. View at Google Scholar
  12. R. D. Geckeler, “ESAD shearing deflectometry: potentials for synchrotron beamline metrology,” in Advances in X-ray/EUV Optics, Components, and Applications, vol. 6317 of Proceedings of SPIE, San Diego, Calif, USA, August 2006. View at Publisher · View at Google Scholar
  13. T. Kimura, H. Ohashi, H. Mimura et al., “A stitching figure profiler of large X-ray mirrors using RADSI for sub-aperture data acquisition,” Nuclear Instruments and Methods in Physics Research Section A, vol. 616, no. 2-3, pp. 229–232, 2010. View at Publisher · View at Google Scholar
  14. J. L. Kirschman, E. E. Domning, W. R. McKinney, G. Y. Morrison, B. V. Smith, and V. V. Yashchuk, “Performance of the upgraded LTP-II at the ALS optical metrology laboratory,” in Advances in X-ray/EUV Optics and Components III, vol. 7077 of Proceedings of SPIE, San Diego, Calif, USA, August 2008. View at Publisher · View at Google Scholar
  15. V. V. Yashchuk, S. Barber, E. E. Domning et al., “Sub-microradian surface slope metrology with the ALS developmental long trace profiler,” Nuclear Instruments and Methods in Physics Research Section A, vol. 616, no. 2-3, pp. 212–223, 2010. View at Publisher · View at Google Scholar
  16. W. R. McKinney, S. C. Irick, J. L. Kirschman, A. A. MacDowell, T. Warwick, and V. V. Yashchuk, “New procedures for the adjustment of elliptic ally bent mirrors with the long trace profiler,” in Advances in Metrology for X-ray and EUV Optics II, vol. 6704 of Proceedings of SPIE, San Diego, Calif, USA, August 2007. View at Publisher · View at Google Scholar
  17. W. R. McKinney, S. C. Irick, J. L. Kirschman, A. A. MacDowell, T. Warwick, and V. V. Yashchuk, “Optimal tuning and calibration of bendabale mirrors with with slope measuring profilers,” Optical Engineering, vol. 48, no. 8, Article ID 083601, 2009. View at Google Scholar
  18. S. Mourikis, W. Jark, E. E. Koch, and V. Saile, “Surface temperature and distortion of optical elements exposed to high power synchrotron radiation beams,” Review of Scientific Instruments, vol. 60, no. 7, pp. 1474–1478, 1989. View at Publisher · View at Google Scholar
  19. T. Warwick and S. Sharma, “Thermal effects and mirror surface figure requirements for a diagnostic beamline at the advanced light source,” Nuclear Instruments and Methods in Physics Research A, vol. 319, no. 1–3, pp. 185–187, 1992. View at Google Scholar
  20. N. Kihara, K. Mashima, S. Miura et al., “Thermal and deformation analyses of side-cooled monochromator mirrors for the SPring-8/Figure-8 soft X-ray undulator,” Journal of Synchrotron Radiation, vol. 5, no. 3, pp. 811–813, 1998. View at Google Scholar
  21. A. K. Freund, “Challenges for synchrotron X-ray optics,” in X-ray Mirrors, Crystals, and Multilayers II, vol. 4782 of Proceedings of SPIE, Seattle, Wash, USA, July 2002. View at Publisher · View at Google Scholar
  22. R. K. Smither, W. Lee, A. Macrander, D. Mills, and S. Rogers, “Recent experiments with liquid gallium cooling of crystal diffraction opticsa,” Review of Scientific Instruments, vol. 63, no. 2, pp. 1746–1754, 1992. View at Publisher · View at Google Scholar
  23. M. R. Howells, “Some fundamentals of cooled mirrors for synchrotron radiation beam lines,” Optical Engineering, vol. 35, no. 4, pp. 1187–1197, 1996. View at Google Scholar
  24. H. R. Beguiristain, J. H. Underwood, M. Koike et al., “haracterization of thermal distortion effects on beamline optics for EUV interferometry and soft X-ray microscopy,” Review of Scientific Instruments, vol. 67, no. 9, pp. 1–9, 1996. View at Google Scholar
  25. K. A. Goldberg, H. R. Beguiristain, J. Bokor et al., “At-wavelength testing of optics for EUV,” in Electron-Beam, X-ray, EUV, and Ion-Beam Submicrometer Lithographies for Manufacturing V, vol. 2437 of Proceedings of SPIE, Santa Clara, Calif, USA, February 1995. View at Publisher · View at Google Scholar
  26. S. Qian, W. Jark, P. Z. Takacs, K. J. Randall, and W. Yun, “In situ surface profiler for high heat load mirror measurement,” Optical Engineering, vol. 34, no. 2, pp. 396–402, 1995. View at Google Scholar
  27. S. Qian, W. Jark, G. Sostero, A. Gambitta, F. Mazzolini, and A. Savoia, “Precise measuring method for detecting the in situ distortion profile of a high-heat-load mirror for synchrotron radiation by use of a pentaprism long trace profiler,” Applied Optics, vol. 36, no. 16, pp. 3769–3775, 1997. View at Google Scholar
  28. P. Z. Takacs, S. Qian, K. J. Randall, W. B. Yun, and H. Li, “Mirror distortion measurements with an In-Situ LTP,” in Advances in Mirror Technology for Synchrotron X-ray and Laser Applications, vol. 3447 of Proceedings of SPIE, San Diego, Calif, USA, July 1998. View at Publisher · View at Google Scholar
  29. O. Hignette, A. K. Freund, and E. Chinchio, “Incoherent X-ray mirror surface metrology,” in Materials, Manufacturing, and Measurement for Synchrotron Radiation Mirrors, vol. 3152 of Proceedings of SPIE, San Diego, Calif, USA, July 1997. View at Publisher · View at Google Scholar
  30. P. Revesz, A. Kazimirov, and I. Bazarov, “In situ visualization of thermal distortions of synchrotron radiation optics,” Nuclear Instruments and Methods in Physics Research Section A, vol. 576, no. 2-3, pp. 422–429, 2007. View at Publisher · View at Google Scholar
  31. T. Kimura, S. Handa, H. Mimura et al., “Development of adaptive mirror for wavefront correction of hard X-ray nanobeam,” in Advances in X-ray/EUV Optics and Components III, vol. 7077 of Proceedings of SPIE, San Diego, Calif, USA, August 2008. View at Publisher · View at Google Scholar
  32. M. Kunz, N. Tamura, K. Chen et al., “A dedicated superbend X-ray microdiffraction beamline for materials, geo-, and environmental sciences at the advanced light source,” Review of Scientific Instruments, vol. 80, no. 3, Article ID 035108, 10 pages, 2009. View at Publisher · View at Google Scholar · View at PubMed
  33. S. Yuan, K. Goldberg, V. V. Yashchuk et al., “At-wavelength and optical metrology of bendable X-ray optics for nanofocusing at the ALS,” in Frontiers in Optics 2009, Laser Science XXV, Special Symposium on Optics for Imaging at the Nanoscale and Beyond, San Jose, Calif, USA, October 2009.
  34. S. Yuan, M. Church, R. Celestre et al., “Surface slope metrology and interferometric wave front measurements on deformable soft X-ray mirrors performed in the laboratory and in-situ at-wavelength,” in Proceedings of the 10th International Conference on Synchrotron Radiation Instrumentation, Melbourne, Australia, October 2009.
  35. V. V. Yashchuk, “Optimal measurement strategies for effective suppression of drift errors,” Review of Scientific Instruments, vol. 80, no. 11, Article ID 115101, 10 pages, 2009. View at Publisher · View at Google Scholar · View at PubMed
  36. V. V. Yashchuk, S. C. Irick, A. A. MacDowell, W. R. McKinney, and P. Z. Takacs, “Air convection noise of pencil-beam interferometer for long-trace profiler,” in Advances in X-ray/EUV Optics, Components, and Applications, vol. 6317 of Proceedings of SPIE, San Diego, Calif, USA, August 2006. View at Publisher · View at Google Scholar