The effect of size on the optical properties of gold nanomaterials has been studied using the theoretical Drude–Sommerfield model. The real and imaginary parts of the dielectric function of bulk as a function of wavelength due to free electron contribution and the real and imaginary parts of the dielectric function of nanogold materials as a function of wavelength due to free electron and bond electron contribution are calculated. The real and imaginary parts of the dielectric function of bulk as a function of wavelength due to the free electron contribution graph and The real and imaginary parts of the dielectric function of nanogold materials as a function of wavelength due to free electron and bond electron contributions are plotted. As we observed from the graphs, the real dielectric functions of both bulk and nanogold materials are inversely proportional to wavelength. The imaginary part of the dielectric function of bulk gold materials is independent of wavelength. At high wavelengths, the size of the gold nanomaterial is highly influenced by both real and imagined dielectric functions at high waves. As the wavelength increases, the effect of the size on the dielectric function also increases. The size-dependent dielectric function of nanomaterials is highly influenced by their optical properties and electrical structure.

Bawoke Mekuye

Rainer Höfer

Gedefaw Mebratie

Computational Study of the Effect of the Size-Dependent Dielectric Functions of Gold Nanomaterials on Optical Properties

The article presents the results of studies of the chemical composition, crystal structure, lattice parameters, microstructure, the valence state of the europium ion (at 300 K), electrical resistivity, and differential thermopower (6–400 K) of samples in the Eu(Cu1 − xAgx)2Si2 (0 ≤ x ≤ 1) substitutional solid solutions. A transition of the europium ion from the valence-stable state of Eu2+ in EuAg2Si2 to the state of intermediate (homogeneous) valence (IV) of the europium ion in EuCu2Si2 with an effective valence ϑeff = 2.41 (300 K) has been initiated by a successive replacement of silver atoms by copper atoms. With appropriate sample compositions, the transition passes through a Kondo-type state. The research subject is the patterns of transformations (when the composition of the sample changes), the electronic state, and, accordingly, the electronic transport properties. The simultaneous coexistence of europium ions in different electronic states is assumed. The substitutional solid solution Eu(Cu1 − xAgx)2Si2 (0 ≤ x ≤ 1) exhibits properties related to the competition between the state of the Kondo system, intermediate valence (IV), and magnetic ordering.

B. Kuzhel

B. Belan

R. Gladyshevskii

H. Noga

I. Shcherba

R. Serkiz

Electron Transport Properties of Eu(Cu1 − xAgx)2Si2 (0 ≤ x ≤ 1): Initiation of Transition Eu2+ ↔ Eu2.41+ in the Intermediate Valence State

In this paper, the effect of a tunable dielectric core on local field enhancement, induced optical bistability, and the optical bistability domain in cylindrical core–shell nanoparticle composites are studied. The local field enhancement factor increases significantly at two resonant frequencies. The results demonstrate that the local field enhancement factor in the cylindrical core–shell nanoparticle increases when the natural attribute of the dielectric function of the dielectric core is varied by adding a dielectric function to it. Furthermore, we demonstrated that the magnitude of the imaginary part of the active dielectric core increases as the onset and offset input intensities increase. This indicates that the optical bistability or threshold width range widens as the imaginary part of the dielectric function of the dielectric core increases, thereby enlarging the threshold domain to improve system activation.

Shewa Getachew

Effect of Tunable Dielectric Core on Optical Bistability in Cylindrical Core–Shell Nanocomposites

In this work, a new canonical transformation for the Anderson lattice Hamiltonian with f–f electron coupling was developed, which was further used to identify a new Kondo lattice Hamiltonian. Different from the single impurity Kondo effect, the resulted new Kondo lattice Hamiltonian only includes the spin-flip scattering processes between conduction electrons and f-electrons, while the normal process of non-spin-flip scattering is absent in this Hamiltonian, under the second order approximation. The new Kondo lattice Hamiltonian may be used to study some anomalous physical properties in some Kondo lattice intermetallic compounds.

Guang-Lin Zhao

A Canonical Transformation for the Anderson Lattice Hamiltonian with f–f Electron Coupling

In this study, the structural, electronic, optical, elastic, and thermodynamic properties of Ytterbium chalcogenides YbX (X = S, Se and Te) were computed within the first principles using generalized gradient approximation (GGA) as implemented in the pseudopotential plane wave approach. The equilibrium total energy for YbX (X = S, Se, and Te) was calculated as a function of the energy cutoff, k-point grid, and lattice parameter. An optimized lattice parameter of 5.6, 5.66, and 6.136 Å were calculated for YbS, YbSe, and YbTe, respectively. The energy band gaps of YbS, YbSe, and YbTe computed are 1.14, 1.32, and 1.48 eV, respectively. In addition, the low band gap (less than 3 eV) for ytterbium chalcogenides indicated that they may have potential applications in photovoltaic cells and laser diodes. Moreover, the negative dielectric function value for a certain frequency range indicates that these compounds are suitable for specific optical and microwave circuit applications. The result of elastic and thermodynamic property computation reveals that ytterbium chalcogenides are mechanically and thermodynamically stable, which can be useful in a variety of electronic device applications.

Lemessa Asefa Eressa

Zeleke Deressa Gerbi

Electronic, Elastic, Optical, and Thermodynamic Properties Study of Ytterbium Chalcogenides Using Density Functional Theory

Dye-sensitized solar cells (DSSCs) have garnered significant attention in the scientific community for more than two decades due to their cost-effectiveness, convenient manufacturability, little toxicity, and straightforward preparation methodology. In this study, we present a cost-effective alternative to the platinum electrode for DSSCs, which serves as the counter electrode. The utilization of vanadium oxide nanoparticles as counter electrodes (CEs) in DSSCs has been the subject of research due to its enhanced stability, cost-effectiveness, and favorable photovoltaic characteristics. The device has been fabricated in configuration of fluorine-doped tin oxide (FTO)||TiO2||ruthenium (II) dye (N719)||iodide—triiodide electrolyte||VO2 (counter electrode)||FTO and investigate their photovoltaic performance. The utilization of X-ray diffraction (XRD) analysis has provided insights into the crystalline properties of VO2, indicating that it exists in a crystalline phase with a crystalline size measuring 43.19 nm and a lattice strain of 1.68 × 10−3. The utilization of a field emission scanning electron microscope (FESEM) that is equipped with an energy dispersive X-ray spectrum reveals a dense microstructure characterized by a uniform distribution of vanadium (V) and oxygen (O) across the whole surface. The Raman spectroscopic examination of VO2 reveals the existence of many Raman bands, thereby confirming the presence of the monoclinic phase. Cyclic voltammetry measurements were employed to investigate the catalytic activity of the CE toward the electrolyte. The photovoltaic performance of the manufactured device was examined by I–V measurement, revealing a notable open circuit voltage (Voc) and efficient power conversion efficiency when compared to the other materials that were evaluated.

Varsha Yadav

Rahul Bhatnagar

Upendra Kumar

Enhancement in the Electrocatalytic and Optoelectronic Performance of Cost-Effective Counter Electrode VO2 for Dye-Sensitized Solar Cell (DSSC)

About this journal

Advances in Condensed Matter Physics publishes research on the experimental and theoretical study of the physics of materials in solid, liquid, amorphous, and exotic states.

Journal profile

Meet the editorial board

Chief Editor, Professor Ulloa, is based at Ohio University and is a condensed matter theorist. His research is focussed on the electronic properties of nanostructures including quantum dots and nanowires, as well as proximity effects in 2D crystals.

Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

Advances in Condensed Matter Physics - Table of contents 2024

Advances in Condensed Matter Physics | Hindawi

title

Advances in Condensed Matter Physics publishes research on the experimental and theoretical study of the physics of materials in solid, liquid, amorphous, and exotic states.

Advances in Condensed Matter Physics