Table of Contents Author Guidelines Submit a Manuscript
Research Letters in Materials Science
Volume 2007, Article ID 18160, 4 pages
http://dx.doi.org/10.1155/2007/18160
Research Letter

Effect of Compatibilizers on the Morphological Properties of ABS and LCP Blends

1Materials Science Centre, Indian Institute of Technology, Kharagpur 721302, India
2Department of Mining Engineering, Indian Institute of Technology, Kharagpur 721302, India

Received 27 August 2007; Accepted 6 November 2007

Academic Editor: Dao Hua Zhang

Copyright © 2007 T. Das et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. “Acrylonitrile butadiene styrene,” from Wikipedia, the free encyclopedia.
  2. W. B. Xie, K. C. Tam, C. Y. Yue, Y. C. Lam, L. Li, and X. Hu, “Mechanical properties and morphology of LCP/ABS blends compatibilized with a styrene-maleic anhydride copolymer,” Polymer International, vol. 52, no. 5, pp. 733–739, 2003. View at Publisher · View at Google Scholar
  3. B. E. Tiganis, L. S. Burn, P. Davis, and A. J. Hill, “Thermal degradation of acrylonitrile-butadiene-styrene (ABS) blends,” Polymer Degradation and Stability, vol. 76, no. 3, pp. 425–434, 2002. View at Publisher · View at Google Scholar
  4. S. C. Tjong and W. Jiang, “Performance characteristics of compatibilized ternary Nylon 6/ABS/LCP in-situ composites,” Journal of Materials Science, vol. 39, no. 8, pp. 2737–2746, 2004. View at Publisher · View at Google Scholar
  5. K. I. Suresh, B. S. Sitaramam, and K. V. S. N. Raju, “Effect of copolymer composition on the dynamic mechanical and thermal behaviour of butyl acrylate-acrylonitrile copolymers,” Macromolecular Materials and Engineering, vol. 288, no. 12, pp. 980–988, 2003. View at Publisher · View at Google Scholar
  6. J. H. Hong, Y.-T. Sung, K. H. Song et al., “Morphology and dynamic mechanical properties of poly(acrylonitrile- butadiene-styrene)/polycarbonate/clay nanocomposites prepared by melt mixing,” Composite Interfaces, vol. 14, no. 5-6, pp. 519–532, 2007. View at Publisher · View at Google Scholar
  7. A. Misra, G. Sawhney, and R. A. Kumar, “Structure and properties of compatibilized blends of polyamide-6 and ABS,” Journal of Applied Polymer Science, vol. 50, no. 7, pp. 1179–1186, 1993. View at Publisher · View at Google Scholar
  8. B. Majumdar, H. Keskkula, and D. R. Paul, “Morphology of nylon 6/ABS blends compatibilized by a styrene/maleic anhydride copolymer,” Polymer, vol. 35, no. 15, pp. 3164–3172, 1994. View at Publisher · View at Google Scholar
  9. T. Limtasiri and A. I. Isayev, “Blends of thermotropic polyester with poly(phenylene oxide),” Journal of Applied Polymer Science, vol. 42, no. 11, pp. 2923–2932, 1991. View at Publisher · View at Google Scholar