Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2013, Article ID 478421, 7 pages
http://dx.doi.org/10.1155/2013/478421
Research Article

Behavior of HPC with Fly Ash after Elevated Temperature

1School of Civil Engineering, Qingdao Technological University, Qingdao 266033, China
2State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China
3Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116023, China

Received 3 January 2013; Accepted 10 March 2013

Academic Editor: Dimitar Dontchev

Copyright © 2013 Huai-Shuai Shang and Ting-Hua Yi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Y. N. Chan, X. Luo, and W. Sun, “Effect of high temperature and cooling regimes on the compressive strength and pore properties of high performance concrete,” Construction and Building Materials, vol. 14, no. 5, pp. 261–266, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Neville and P. C. Aitcin, “High performance concrete-an overview,” Materials Structure, vol. 31, pp. 111–117, 1998. View at Google Scholar
  3. M. Nehdi, S. Mindess, and P. C. Aïtcin, “Rheology of high-performance concrete: effect of ultrafine particles,” Cement and Concrete Research, vol. 28, no. 5, pp. 687–697, 1998. View at Google Scholar · View at Scopus
  4. Y. N. Chan, G. F. Peng, and M. Anson, “Spalling mechanism and fire resistance of high performance silica fume concrete with different moisture content,” in Proceedings of the 4th Beijing International Symposium on Cement and Concrete, vol. 3, pp. 149–153, Beijing, China, 1998.
  5. J. Z. Xiao, P. Wang, J. Li, and S. D. Zhang, “Test on compressive strength of HPC with blast furnace slag after high temperature,” in Proceedings of the Fourth National Conference on HSC and HPC, pp. 204–210, Changsha, China, 2001.
  6. R. Demirboǧa, I. Örüng, and R. Gül, “Effects of expanded perlite aggregate and mineral admixtures on the compressive strength of low-density concretes,” Cement and Concrete Research, vol. 31, no. 11, pp. 1627–1632, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Bilodeau and V. M. Malhotra, “High-volume fly ash system: concrete solution for sustainable development,” ACI Structural Journal, vol. 97, no. 1, pp. 41–48, 2000. View at Google Scholar · View at Scopus
  8. A. Yeğinobalı, K. G. Sobolev, S. V. Soboleva, and B. Kıyıcı, “Thermal resistance of blast furnace slag high strength concrete cement,” in Proceedings of the 1st International Symposium on Mineral Admixtures in Cement, pp. 106–117, Istanbul, Turkey, 1997.
  9. G. Y. Kim, Y. S. Kim, and T. G. Lee, “Mechanical properties of high-strength concrete subjected to high temperature by stressed test,” Transactions of Nonferrous Metals Society of China, vol. 19, no. 1, pp. s128–s133, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. C. S. Poon, Z. H. Shui, and L. Lam, “Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures,” Cement and Concrete Research, vol. 34, no. 12, pp. 2215–2222, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. W. Khaliq and V. Kodur, “Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures,” Cement and Concrete Research, vol. 41, pp. 1112–1122, 2011. View at Google Scholar
  12. C. Castillo and A. J. Durrani, “Effect of transient high temperture on high-strength concrete,” ACI Materials Journal, vol. 87, no. 1, pp. 47–53, 1990. View at Google Scholar · View at Scopus
  13. G. Sanjayan and L. J. Stocks, “Spalling of high-strength silica fume concrete in fire,” ACI Materials Journal, vol. 90, no. 2, pp. 170–173, 1993. View at Google Scholar · View at Scopus
  14. C. Castillo and A. J. Durrani, “Effect of transient high temperature on high-strength concrete,” ACI Materials Journal, vol. 871, pp. 47–53, 1990. View at Google Scholar
  15. J. Xiao and H. Falkner, “On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures,” Fire Safety Journal, vol. 41, no. 2, pp. 115–122, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. GB/T 50081-2002 and National Standard of the People’s Republic of China, Standard for Test Method of Mechanical Properties on Ordinary Concrete, 2003.
  17. GB175-99 and National Standard of the People’s Republic of China, Portland Cement and Ordinary Portland Cement, 1999.
  18. P. Y. Lu, Y. P. Song, and Z. M. Wu, “Strength and deformation characteristics of concrete subjected to different loading rates combined with confined stress,” Journal of Dalian University of Technology, vol. 41, no. 6, pp. 716–720, 2001 (Chinese). View at Google Scholar · View at Scopus
  19. H. Tanyildizi and A. Coskun, “The effect of high temperature on compressive strength and splitting tensile strength of structural lightweight concrete containing fly ash,” Construction and Building Materials, vol. 22, no. 11, pp. 2269–2275, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. JTJ 270-98 and National Standard of the People’s Republic of China, Testing Code of Concrete for Port and Waterwog Engineering, 1999.
  21. N. Yüzer, F. Aköz, and L. D. Öztürk, “Compressive strength-color change relation in mortars at high temperature,” Cement and Concrete Research, vol. 34, no. 10, pp. 1803–1807, 2004. View at Google Scholar
  22. K. D. Hertz, “Danish investigations on silica fume concretes at elevated temperatures,” ACI Materials Journal, vol. 89, no. 4, pp. 345–347, 1992. View at Google Scholar · View at Scopus
  23. Y. N. Chan, G. F. Peng, and M. Anson, “Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperatures,” Cement and Concrete Composites, vol. 21, no. 1, pp. 23–27, 1999. View at Google Scholar · View at Scopus