Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 134063, 5 pages
http://dx.doi.org/10.1155/2014/134063
Research Article

Palm Olein as Renewable Raw Materials for Industrial and Pharmaceutical Products Applications: Chemical Characterization and Physicochemical Properties Studies

1School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan, Malaysia
2Clinical Investigation Centre, University Malaya Medical Centre, 13th Floor Main Tower, Lembah Pantai, 59100 Kuala Lumpur, Malaysia
3Department of Pharmacy, Faculty of Medicine, University of Malaya, 50603 Kuala Lumpur, Malaysia

Received 2 February 2014; Revised 8 July 2014; Accepted 8 July 2014; Published 18 September 2014

Academic Editor: Luigi Nicolais

Copyright © 2014 Darfizzi Derawi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. D. Gunsotne, The Chemistry of Oils and Fats, Sources, Composition, Properties and Uses, Blackwell, Oxford, UK, 2004.
  2. F. D. Gunstone and F. B. Padley, Lipid Technologies and Applications, Marcel Dekker, New York, NY, USA, 1997.
  3. R. D. O'Brien, Fats and Oils; Formulating and Processing for Applications, Technomic Publishing AG, Basel, Switzerland, 1998.
  4. F. D. Gunstone, J. L. Harwood, and F. B. Padley, The Lipid Handbook, Chapman & Hall, London, UK, 2nd edition, 1994.
  5. D. L. Pavia, Introduction to Spectroscopy, Thomson Learning, Stamford, Conn, USA, 2001.
  6. M. R. Ramli, W. L. Siew, and K. Y. Cheah, “Properties of high-oleic palm oils derived by fractional crystallization,” Journal of Food Science, vol. 73, no. 3, pp. C140–C145, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. G. W. Stachowiak and A. W. Batchelor, Engineering Tribology, Elsevier, London, UK, 3rd edition, 2005.
  8. D. Derawi and J. Salimon, “Palm olein polyols production by batch and continuous hydrolisis,” Sains Malaysiana, vol. 42, no. 8, pp. 1121–1129, 2013. View at Google Scholar · View at Scopus
  9. J. Salimon, B. M. Abdullah, and N. Salih, “Selectively increasing of polyunsaturated (18:2) and monounsaturated (18:1) fatty acids in Jatropha curcas seed oil by crystallization using D-optimal design,” Chemistry Central Journal, vol. 6, no. 1, article 65, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Salimon, B. M. Abdullah, and N. Salih, “Hydrolysis optimization and characterization study of preparing fatty acids from Jatropha curcas seed oil,” Chemistry Central Journal, vol. 5, no. 1, article 67, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Salimon, M. Said, S. Ramli, and M. A. S. Mat Lazim, Oils and Fats Analysis, Penerbit UKM, Bangi, Malaysia, 2006.
  12. Emery, Emery Analytical Testing Procedures, Emery Industries, Cincinnati, Ohio, USA, 1983.
  13. J. Salimon, B. M. Abdullah, and N. Salih, “Saponification of jatropha curcas seed oil: optimization by D-optimal design,” International Journal of Chemical Engineering, vol. 2012, Article ID 574780, 6 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. B. M. Abdullah and J. Salimon, “Physicochemical characteristics of Malaysian rubber (Hevea Brasiliensis) seed oil,” European Journal of Scientific Research, vol. 31, no. 3, pp. 437–445, 2009. View at Google Scholar · View at Scopus
  15. N. Salih, J. Salimon, E. Yousif, and B. M. Abdullah, “Biolubricant basestocks from chemically modified plant oils: ricinoleic acid based-tetraesters,” Chemistry Central Journal, vol. 7, no. 1, article 128, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Salimon, N. Salih, and B. M. Abdullah, “Diesters biolubricant base oil: synthesis, optimization, characterization, and physicochemical characteristics,” International Journal of Chemical Engineering, vol. 2012, Article ID 896598, 10 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus