Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 136059, 9 pages
http://dx.doi.org/10.1155/2014/136059
Research Article

Fatigue Durability Analysis of Collecting Rapping System in Electrostatic Precipitators under Impact Loading

Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran 14778 93855, Iran

Received 29 July 2013; Revised 24 November 2013; Accepted 2 December 2013; Published 12 January 2014

Academic Editor: Martha Guerrero

Copyright © 2014 Ali Akbar Lotfi Neyestanak et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. A. Lloyd, Electrostatic Precipitator Handbook, A. Hilger, Bristol, UK, 1988.
  2. J. Harry, Industrial Electrostatic Precipitation, International Society of Electrostatic Precipitation (ISESP), Addison-Wesley, 1963.
  3. A. Mizuno, “Electrostatic precipitation,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 7, no. 5, pp. 615–624, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. K. J. McLean, “Electrostatic precipitators,” IEE Proceedings A, vol. 135, no. 6, pp. 347–361, 1988. View at Google Scholar · View at Scopus
  5. J. Katz, The Art of Electrostatic Precipitation, Precipitator Technology, Munhall, Pa, USA, 1979.
  6. K. R. Parker, Ed., Applied Electrostatic Precipitation, Blackie Academic and Professional, London, UK, 1997.
  7. K. Parker, Electrical Operation of Electrostatic Precipitators, 2007.
  8. K. Darby, “An examination of the full electrostatic precipitation process for cleaning of gases,” in Proceedings 10th Particulate Control Symposium and 5th ICESP Conference on ESPs, pp. 1–17, Washington, DC, USA, 1993, EPRI TR-103048 V2.
  9. FLSmidth Airtech, Electrostatic Precipitator, Air Pollution Control, 2010.
  10. A. Strehlow and M. Schmoch, “Comparison of techniques for electrode rapping in electrostatic precipitators,” Proceedings of the International Conference on Electrostatic Precipitation (ICESP '01), Birmingham, Ala, USA, May 2001.
  11. L. Lillieblad, M. Thimanson, K. Porle, and H. Jacobson, “On dust cake removal in electrostatic precipitators,” Proceedings of the International Conference on Electrostatic Precipitation (ICESP '00), May 2000.
  12. S. S. Manson and G. R. Halford, Fatigue and Durability of Structural Materials, ASM International, 2006.
  13. R. Brooks, “Fatigue fracture of stainless steel wires in an electrostatic precipitator at a paper plant,” in Handbook of Case Histories in Failure Analysis, vol. 1, ASM International, 1992. View at Google Scholar
  14. L. Witek, “Numerical stress and crack initiation analysis of the compressor blades after foreign object damage subjected to high-cycle fatigue,” Engineering Failure Analysis, vol. 18, no. 8, pp. 2111–2125, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Bagnoli, L. Allegrucci, M. Colavita, and M. Bernabei, “Fatigue failure of a stainless steel wires used in a hydraulic pressure line,” Engineering Failure Analysis, vol. 16, no. 5, pp. 1404–1411, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Witek, M. Wierzbińska, and A. Poznańska, “Fracture analysis of compressor blade of a helicopter engine,” Engineering Failure Analysis, vol. 16, no. 5, pp. 1616–1622, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Infante, J. M. Silva, M. de Freitas, and L. Reis, “Failures analysis of compressor blades of aeroengines due to service,” Engineering Failure Analysis, vol. 16, no. 4, pp. 1118–1125, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. ABAQUS 6.10-1 Software Dassault Systèmes Simulia Corporation, Providence, RI, USA, 2010.
  19. A. P. Nowak, “Measurement verification of the hybrid finite element method,” in Proceedings of the 4th European Conference on Computational Mechanics (ECCM '10), Paris, France, May 2010.
  20. A. Nowak and S. Wojciech, “Optimisation and experimental verification of a dust-removal beater for the electrodes of electrostatic precipitators,” Computers and Structures, vol. 82, no. 22, pp. 1785–1792, 2004. View at Publisher · View at Google Scholar · View at Scopus