Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 159790, 9 pages
http://dx.doi.org/10.1155/2014/159790
Research Article

The Mechanical Behavior of Fiber Reinforced PP ECC Beams under Reverse Cyclic Loading

Shenyang Architectural University, Hunnan East Road 9, Shenyang 110168, China

Received 1 January 2014; Accepted 19 May 2014; Published 2 July 2014

Academic Editor: João Marciano Laredo dos Reis

Copyright © 2014 Yaw ChiaHwan and Han JianBo. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Wang, Micromechanics based matrix design for engineered cementitious composites [Ph.D. thesis], University of Michigan, Ann Arbor, Mich, USA, 2005.
  2. M. Maalej, S. T. Quek, and J. Zhang, “Behavior of hybrid-fiber engineered cementitious composites subjected to dynamic tensile loading and projectile impact,” Journal of Materials in Civil Engineering, vol. 17, no. 2, pp. 143–152, 2005. View at Google Scholar
  3. E. H. Yang, Designing added functions in engineered cementitious composites [Ph.D. thesis], University of Michigan, Ann Arbor, Mich, USA, 2008.
  4. E. H. Yang, S. Wang, Y. Yang, and V. C. Li, “Fiber-bridging constitutive law of engineered cementitious composites,” Journal of Advanced Concrete Technology, vol. 6, no. 1, pp. 181–193, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. V. B. Anna, “Self-healing concrete,” Forbes, vol. 2, pp. 46–47, 2009. View at Google Scholar
  6. G. Fischer and V. C. Li, “Effect of matrix ductility on deformation behavior of steel Reinforced ECC flexural members under reversed cyclic loading conditions,” ACI Structural Journal, vol. 99, no. 6, pp. 781–790, 2002. View at Google Scholar · View at Scopus
  7. E. H. Yang and V. C. Li, “Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model,” Construction and Building Materials, vol. 24, no. 2, pp. 130–139, 2010. View at Publisher · View at Google Scholar · View at Scopus