Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 160580, 6 pages
http://dx.doi.org/10.1155/2014/160580
Research Article

Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites

1Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
2School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia
3Department of Production Systems, Toyohashi University of Technology, Toyohashi, Aichi 440-0038, Japan

Received 29 May 2013; Revised 31 October 2013; Accepted 31 October 2013; Published 19 January 2014

Academic Editor: Pavel Lejcek

Copyright © 2014 B. D. Long et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

B. D. Long, R. Othman, Hussain Zuhailawati, and M. Umemoto, “Comparison of Two Powder Processing Techniques on the Properties of Cu-NbC Composites,” Advances in Materials Science and Engineering, vol. 2014, Article ID 160580, 6 pages, 2014. doi:10.1155/2014/160580