Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 170279, 12 pages
http://dx.doi.org/10.1155/2014/170279
Research Article

Mechanical Properties Measurement of Polymer Films by Bulge Test and Fringe Projection

1Ph. D. Program of Mechanical and Aeronautical Engineering, Feng Chia University, No. 100 Wen Hwa Road, Taichung 40724, Taiwan
2Department of Applied Mathematics, Feng Chia University, No. 100 Wen Hwa Road, Taichung 40724, Taiwan
3Department of Photonics, Feng Chia University, No. 100 Wen Hwa Road, Taichung 40724, Taiwan
4Department of Electrical Engineering, Feng Chia University, No. 100 Wen Hwa Road, Taichung 40724, Taiwan
5Department of Environmental Engineering and Science, Feng Chia University, No. 100 Wen Hwa Road, Taichung 40724, Taiwan
6Department of Material Science and Engineering, Feng Chia University, No. 100 Wen Hwa Road, Taichung 40724, Taiwan

Received 25 March 2014; Accepted 21 April 2014; Published 20 May 2014

Academic Editor: Chi-Wai Chow

Copyright © 2014 C. S. Lin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

C. S. Lin, T. L. Horng, J. H. Chen, et al., “Mechanical Properties Measurement of Polymer Films by Bulge Test and Fringe Projection,” Advances in Materials Science and Engineering, vol. 2014, Article ID 170279, 12 pages, 2014. doi:10.1155/2014/170279