Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 249174, 9 pages
http://dx.doi.org/10.1155/2014/249174
Research Article

A Study on the Effect of the Boron Potential on the Mechanical Properties of the Borided Layers Obtained by Boron Diffusion at the Surface of AISI 316L Steel

1Instituto Politécnico Nacional, UPIBI, Avenida Acueducto s/n Barrio La Laguna Ticomán, 07340 México, DF, Mexico
2Instituto Tecnológico Superior de Poza Rica, Luis Donaldo Colosio Murrieta s/n, Arrollo del Maíz, 93230 Poza Rica, VER, Mexico
3Universidad Autónoma del Estado de México, Boulevard Universitario s/n, Predio San Javier, 54500 Atizapán de Zaragoza, MEX, Mexico
4Departamento de Ingeniería Química Industrial, IPN-ESIQIE, UPALM Edifício 7, 1er Piso, Zacatenco, 07738 México, DF, Mexico

Received 27 August 2014; Accepted 30 October 2014; Published 24 November 2014

Academic Editor: Ming-Xing Zhang

Copyright © 2014 E. Hernández-Sánchez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H.-G. Neumann, U. Beck, M. Drawe, and J. Steinbach, “Multilayer systems for corrosion protection of stainless steel implants,” Surface and Coatings Technology, vol. 98, no. 1–3, pp. 1157–1161, 1998. View at Publisher · View at Google Scholar · View at Scopus
  2. I. Özbek, B. A. Konduk, C. Bindal, and A. H. Ucisik, “Characterization of borided AISI 316L stainless steel implant,” Vacuum, vol. 65, no. 3-4, pp. 521–525, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. I. Gurrappa, “Development of appropriate thickness ceramic coatings on 316 L stainless steel for biomedical applications,” Surface and Coatings Technology, vol. 161, pp. 70–78, 2002. View at Publisher · View at Google Scholar
  4. O. Allaoui, N. Bouaouadja, and G. Saindernan, “Characterization of boronized layers on a XC38 steel,” Surface and Coatings Technology, vol. 201, no. 6, pp. 3475–3482, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Keddam and S. M. Chentouf, “A diffusion model for describing the bilayer growth (FeB/Fe2B) during the iron powder-pack boriding,” Applied Surface Science, vol. 252, no. 2, pp. 393–399, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Graf von Matuschka, Boronizing, Carl Hanser, Munich, Germany, 1st edition, 1980.
  7. V. Jain and G. Sundararajan, “Influence of the pack thickness of the boronizing mixture on the boriding of steel,” Surface and Coatings Technology, vol. 149, no. 1, pp. 21–26, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. I. Campos, O. Bautista, G. Ramírez, M. Islas, J. De La Parra, and L. Zúñiga, “Effect of boron paste thickness on the growth kinetics of Fe2B boride layers during the boriding process,” Applied Surface Science, vol. 243, no. 1–4, pp. 429–436, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Wahl, “Durferrit—technical information,” Tech. Rep. VDI-Z117, 1975. View at Google Scholar
  10. O. Ozdemir, M. A. Omar, M. Usta, S. Zeytin, C. Bindal, and A. H. Ucisik, “An investigation on boriding kinetics of AISI 316 stainless steel,” Vacuum, vol. 83, no. 1, pp. 175–179, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. W. C. Oliver and G. M. Pharr, “Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” Journal of Materials Research, vol. 7, no. 6, pp. 1564–1580, 1992. View at Publisher · View at Google Scholar · View at Scopus
  12. B. R. Lawn, A. G. Evans, and D. B. Marshall, “Elastic/plastic indentation damage in ceramics: the median/radial crack system,” Journal of the American Ceramic Society, vol. 63, no. 9-10, pp. 574–581, 1980. View at Publisher · View at Google Scholar · View at Scopus
  13. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, “A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements,” Journal of the American Ceramic Society, vol. 64, no. 9, pp. 533–538, 1981. View at Publisher · View at Google Scholar
  14. M. T. Laugier, “New formula for indentation toughness in ceramics,” Journal of Materials Science Letters, vol. 6, pp. 355–356, 1987. View at Publisher · View at Google Scholar
  15. J. B. Quinn and G. D. Quinn, “Indentation brittleness of ceramics: a fresh approach,” Journal of Materials Science, vol. 32, no. 16, pp. 4331–4346, 1997. View at Publisher · View at Google Scholar · View at Scopus
  16. U. Sen and S. Sen, “The fracture toughness of borides formed on boronized cold work tool steels,” Materials Characterization, vol. 50, no. 4-5, pp. 261–267, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Palombarini and M. Carbucicchio, “On the morphology of thermochemically produced Fe2B/Fe interfaces,” Journal of Materials Science Letters, vol. 3, no. 9, pp. 791–794, 1984. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Campos-Silva, M. Ortiz-Domínguez, O. Bravo-Bárcenas et al., “Formation and kinetics of FeB/Fe2B layers and diffusion zone at the surface of AISI 316 borided steels,” Surface and Coatings Technology, vol. 205, no. 2, pp. 403–412, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. L. G. Yu, X. J. Chen, K. A. Khor, and G. Sundararajan, “FeB/Fe2B phase transformation during SPS pack-boriding: boride layer growth kinetics,” Acta Materialia, vol. 53, no. 8, pp. 2361–2368, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. A. K. Sinha, ASM Handbook, vol. 4, ASM International, Materials Park, Ohio, USA, 1991.
  21. I. Campos-Silva, N. López-Perrusquia, E. Hernández-Sánchez, M. Ortíz-Domínguez, D. Bravo-Bárcenas, and J. Martínez-Trinidad, “Anisotropy of boride layers: effect on the mechanical properties of AISI 4140 borided steels,” Defect and Diffusion Forum, vol. 297–301, pp. 142–147, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Sergejev and M. Antonov, “Comparative study on indentation fracture toughness measurements of cemented carbides,” Proceedings of the Estonian Academy of Sciences Engineering, vol. 12, no. 4, pp. 388–398, 2006. View at Google Scholar