Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 274502, 6 pages
Research Article

A Method to Determine Energy and Power of a Fracture Process in Polycrystals by Means of HVTEM

1Instituto Politécnico Nacional, Escuela Superior de Ingeniería Mecánica y Eléctrica, Sección de Estudios de Posgrado e Investigación, Laboratorio de Fuerza Atómica Avenida de las Granjas No. 682, 02250 Azcapotzalco, DF, Mexico
2Institute of Metallurgy BAIKOV, Russian Academy of Science, Lenninsky Prozpekt No. 49, Moscow, Russia

Received 1 October 2013; Revised 23 December 2013; Accepted 30 December 2013; Published 17 February 2014

Academic Editor: Rui Zhang

Copyright © 2014 Pedro Alejandro Tamayo-Meza et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Meyz, Theory and Problems of Continuum Mechanics, Librokom, Moscow, Russia, 3rd edition, 2010.
  2. G. G. Chell, “Bilby, Cottrell and Swinden model solutions for centre and edge cracked plates subject to arbitrary mode I loading,” International Journal of Fracture, vol. 12, no. 1, pp. 135–147, 1976. View at Publisher · View at Google Scholar · View at Scopus
  3. D. S. Dugdale, “Yielding of steel sheets containing slits,” Journal of the Mechanics and Physics of Solids, vol. 8, no. 2, pp. 100–104, 1960. View at Google Scholar · View at Scopus
  4. M. Shiratori, T. Miyoshi, and H. Matsushita, Numerical Fracture Mechanics, Jikkyo Shuppan, Tokyo, Japan, 1980.
  5. V. Z. Parton and E. M. Morozov, Elastic-Plastic Fracture Mechanics, Mir, Moscow, Russia, 1974.
  6. D. Broek, Elementary Engineering Fracture Mechanics, Nijholf, The Hague, The Netherlands, 1982.
  7. H. Mughrabi, “Observations of dislocations in the stress-applied state in copper single crystals deformed at the low temperature (78°K),” in Proceedings of the Septieme Congress Internationale de Microscopie Electronique, pp. 267–268, Grenoble, France, 1970.
  8. R. W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons, New York, NY, USA, 4th edition, 1996.
  9. C. W. Smith and A. S. Kobayashi, “Experimental Fracture Mechanics,” in Handbook on Experimental Mechanics, chapter 20, pp. 905–968, Wiley-VCH, New York, NY, USA, 2nd edition, 1993. View at Google Scholar
  10. J. W. Hutchinson, “Singular behaviour at the end of a tensile crack in a hardening material,” Journal of the Mechanics and Physics of Solids, vol. 16, no. 1, pp. 13–31, 1968. View at Google Scholar · View at Scopus
  11. J. W. Hutchinson, “Plastic stress and strain fields at a crack tip,” Journal of the Mechanics and Physics of Solids, vol. 16, no. 5, pp. 337–342, 1968. View at Google Scholar · View at Scopus
  12. F. McClintock, Mechanical Behavior of Materials, Addison-Wesley, Boston, Mass, USA, 1966.
  13. S. P. Timoshenko and J. Gere, Mechanics of Materials, PWS Engineering, Boston, Mass, USA, 2nd edition, 1984.
  14. Y. N. Robotnov, Mechanics of a Deformed Solid Body, Nauka, Moscow, Russia, 1988.
  15. J. R. Rice, “A path independent integral and the approximate analysis of strain concentration by notches and cracks,” Journal of Applied Mechanics, vol. 35, pp. 379–386, 1968. View at Publisher · View at Google Scholar
  16. J. R. Rice and M. A. Johnson, The Role of Large Crack Tip Geometry Changes in Plane Strain Fracture, Division of Engineering, Brown University, U.S. Atomic Energy Commission, no. 38, pp. 38, 1969.
  17. B. A. Bilby, A. H. Cottrell, and A. H. Swindon, “The spread of plastic yield from a notch,” Proceedings of the Royal Society A, vol. 272, no. 1350, pp. 304–314, 1963. View at Google Scholar
  18. G. Galatenko, “The duglade’s type crack model for elliptic crack at multiaxial loading,” in Proceedings of the 8th International Fracture Conference, pp. 51–56, Istanbul, Turkey, November 2007.
  19. D. Häussler, M. Bartsch, U. Messerschmidt, and B. Reppich, “HVTEM in situ observations of dislocation motion in the oxide dispersion strengthened superalloy MA 754,” Acta Materialia, vol. 49, no. 18, pp. 3647–3657, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. V. F. Sujovarov, Intermitent Segregation of Fases in Alloys, Nauka, Novosibirsk, Russia, 1983 (Russian).