Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 327856, 7 pages
http://dx.doi.org/10.1155/2014/327856
Research Article

Waste Tire Particles and Gamma Radiation as Modifiers of the Mechanical Properties of Concrete

1Facultad de Química, Universidad Autónoma del Estado de México, Paseo Colón Esquina Paseo Tollocan s/n, 50180 Toluca, MEX, Mexico
2Laboratorio de Investigación y Desarrollo de Materiales Avanzados (LIDMA), Facultad de Química, Universidad Autónoma del Estado de México, km 12 de la Carretera Toluca-Atlacomulco, San Cayetano, 50200 Toluca, MEX, Mexico
3Centro Conjunto de Investigación en Química Sustentable, Universidad Autónoma del Estado de México, Universidad Nacional Autónoma de México (UAEM-UNAM), Carretera Toluca-Atlacomulco km 14.5, Unidad El Rosedal, 50200 Toluca, MEX, Mexico
4Unidad de Irradiación y Seguridad Radiológica, Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, A.P. 70-543, 04510 Mexico City, DF, Mexico

Received 15 November 2013; Accepted 27 January 2014; Published 6 March 2014

Academic Editor: Osman Gencel

Copyright © 2014 Eduardo Sadot Herrera-Sosa et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. K. Dhir, M. C. Limbachiya, and K. A. Paine, Recycling and Use of Tyres, Thomas Telford, London, UK, 2001.
  2. M. R. Taha, A. S. El-Dieb, and M. Nehdi, “Recycling tire rubber in cement-based material,” Concrete With Recycled Materials, ACI Committee 555, 2008. View at Google Scholar
  3. H. Briodsky, “The important role retreads can play in reducing the scrap tyre problem,” in Recycling and Use of Tyres, R. K. Dhir, M. C. Limbachiya, and K. A. Paine, Eds., pp. 57–62, Thomas Telford, London, UK, 2001. View at Google Scholar
  4. K. M. Brown, R. Cummings, J. R. Mrozek, and P. Terrebonne, “Scrap tire disposal: three principles for policy choice,” Natural Resources Journal, vol. 41, no. 1, pp. 9–22, 2001. View at Google Scholar · View at Scopus
  5. R. W. Davies and G. S. Worthinton, “Use of scrap tyre as a fuel in the cement manufacturing process,” in Recycling and Use of Tyres, R. K. Dhir, M. C. Limbachiya, and K. A. Paine, Eds., pp. 93–106, Thomas Telford, London, UK, 2001. View at Google Scholar
  6. R. Mis-Fernandez, J. A. Azamar-Barrios, and C. R. Rios-Soberanis, “Characterization of the powder obtained from wasted tires reduced by pyrolysis and thermal shock process,” Journal of Applied Research and Technology, vol. 6, pp. 95–105, 2008. View at Google Scholar
  7. S. N. Amirkhanian, “Utilization of crumb rubber in asphaltic concrete mixtures-south Carolinas's experience,” Research Report, South Carolina Department of Transportation, 2001. View at Google Scholar
  8. F. J. Navarro, P. Partal, F. Martínez-Boza, and C. Gallegos, “Influence of crumb rubber concentration on the rheological behavior of a crumb rubber modified bitumen,” Energy and Fuels, vol. 19, no. 5, pp. 1984–1990, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. R. G. Nelson and A. S. M. M. Hossain, “An energetic and economic analysis of using scrap tyres for electricity generation and cement manufacturing,” in Recycling and Use of Tyres, R. K. Dhir, M. C. Limbachiya, and K. A. Paine, Eds., pp. 119–127, Thomas Telford, London, UK, 2001. View at Google Scholar
  10. C.-T. Chiu, “Use of ground tire rubber in asphalt pavements: field trial and evaluation in Taiwan,” Resources, Conservation and Recycling, vol. 52, no. 3, pp. 522–532, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. V. M. Malhotra, “Role of supplementary cementing materials in reducing greenhouse gas emissions,” in Concrete Technology for a Sustainable Development in the 21st Century, O. E. Gjorv and K. Sakai, Eds., pp. 226–235, E & FN Spon, London, UK, 2000. View at Google Scholar
  12. C. Meyer, “Concrete as a green building material,” in Proceedings of the 3rd International Conference on Construction Materials (ConMat '05), Vancouver, Canada, 2005.
  13. G. L. Nacif, T. H. Panzera, K. Strecker, A. L. Christoforo, and K. Paine, “Investigations on cementitious composites based on rubber particle waste additions,” Materials Research, vol. 16, pp. 259–268, 2013. View at Google Scholar
  14. R. Siddique and T. R. Naik, “Properties of concrete containing scrap-tire rubber—an overview,” Waste Management, vol. 24, no. 6, pp. 563–569, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Karger-Kocsis, “Waste tyre rubber—what to do next?” eXPRESS Polymer Letters, vol. 7, p. 406, 2013. View at Google Scholar
  16. C. R. Rios-Soberanis, S. Wakayama, T. Sakai, J. A. Rodriguez-Laviada, and E. Pérez-Pacheco, “Manufacture of partially biodegradable composite materials based on PLA-Tires powder: process and characterization,” International Journal of Polymer Science, vol. 2013, Article ID 514951, 8 pages, 2013. View at Publisher · View at Google Scholar
  17. G. Skripkiunas, A. Grinys, and M. Dauksys, “Using tires rubber waste for modification of concrete properties,” in Sustainable Construction Materials and Technologies, Y. M. Chun, P. Claisse, T. R. Naik, and E. Ganjian, Eds., pp. 85–90, Taylor & Francis, London, UK, 2007. View at Google Scholar
  18. American Concrete Institute Committee 318: ACI 318-05/318R-05, “Building Code Requirements for Structural Concrete and Commentary,” 2005.