Performance Analysis of γ-Radiation Test Monitor Using Monocrystalline n+pp++ Silicon Solar Cell: CsI(Tl) Scintillator
Table 1
Dimensions and physical properties of (a) solar cell and (b) CsI(Tl) scintillator [9] employed.
(a) Solar cell n+pp++
Cell type
Solar cell area (cm2)
Sensitive area with CsI(TI) (cm2)
Peak sensitivity wavelength (μm)
Thickness (μm)
Short circuit current (A)
Open circuit voltage (V)
Conversion efficiency %
Output power (W)
Single crystal silicon
10 × 10
5 × 5
0.5 to 0.53
400
3.2
0.6
16
1.2–1.4
Note: the electrical parameters for monocrystalline solar cells n+pp++ PESC of dimensions (10 cm × 10 cm) are related to the conditions of solar irradiation 1000 W/m2, air mass (AM) 1.5 spectrum, and cell temperature 25°C.
(b) CsI(Tl) scintillator
Light output (%)
Max. emission wavelength (μm)
Decay time (nS)
H. thickness (cm)
Density (gm/cm3)
Melting point (°C)
Dimensions (mm3)
45–50
550
103
2.0
4.51
894
50 × 50 × 10
Note: light output: light output % of NaI(Tl); H. thickness: half-thickness value for Cs(662 keV).