Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 376351, 2 pages
http://dx.doi.org/10.1155/2014/376351
Editorial

Advanced Composites with Natural Reinforcement

1Department of Applied Physics, Curtin University, G.P.O. Box U1987, Perth, WA 6845, Australia
2Department of Mechanical Engineering, Curtin University, G.P.O. Box U1987, Perth, WA 6845, Australia
3Department of Civil Engineering, Curtin University, G.P.O. Box U1987, Perth, WA 6845, Australia
4Centre of Excellence in Engineered Fibre Composites (CEEFC), University of Southern Queensland, Toowoomba, QLD 4350, Australia
5School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang, Malaysia

Received 12 December 2013; Accepted 12 December 2013; Published 22 April 2014

Copyright © 2014 Jim Low et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

This article has no abstract.