Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 438216, 10 pages
http://dx.doi.org/10.1155/2014/438216
Research Article

Development of Pd Alloy Hydrogen Separation Membranes with Dense/Porous Hybrid Structure for High Hydrogen Perm-Selectivity

1Department of Advanced Materials Engineering, Kyonggi University, Gyeonggi-do 443-760, Republic of Korea
2Department of SDM (Semiconductor Display Mechatronics), Kyonggi University, Gyeonggi-do 443-760, Republic of Korea
3School of Energy, Materials & Chemical Engineering, Korea University of Technology and Education, Chungcheongnam-do 330-760, Republic of Korea

Received 14 July 2014; Revised 16 September 2014; Accepted 17 September 2014; Published 13 October 2014

Academic Editor: Zoe Barber

Copyright © 2014 Jae-Yun Han et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Adhikari and S. Fernando, “Hydrogen membrane separation techniques,” Industrial & Engineering Chemistry Research, vol. 45, no. 3, pp. 875–881, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. S. Cheng and K. L. Yeung, “Palladium-silver composite membranes by electroless plating technique,” Journal of Membrane Science, vol. 158, no. 1-2, pp. 127–141, 1999. View at Publisher · View at Google Scholar · View at Scopus
  3. Ø. Hatlevik, S. K. Gade, M. K. Keeling, P. M. Thoen, A. P. Davidson, and J. D. Way, “Palladium and palladium alloy membranes for hydrogen separation and production: History, fabrication strategies, and current performance,” Separation and Purification Technology, vol. 73, no. 1, pp. 59–64, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. D.-W. Kim, Y.-J. Park, S.-M. Kang, H.-S. An, and J.-S. Park, “Pd-Cu-Ni ternary alloy membrane with high temperature durability for hydrogen separation and purification,” Japanese Journal of Applied Physics, vol. 49, no. 10, Article ID 100208, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. E. David and J. Kopac, “Devlopment of palladium/ceramic membranes for hydrogen separation,” International Journal of Hydrogen Energy, vol. 36, no. 7, pp. 4498–4505, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Bhandari and Y. H. Ma, “Pd-Ag membrane synthesis: the electroless and electro-plating conditions and their effect on the deposits morphology,” Journal of Membrane Science, vol. 334, no. 1-2, pp. 50–63, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. M. L. Bosko, J. B. Miller, E. A. Lombardo, A. J. Gellman, and L. M. Cornaglia, “Surface characterization of Pd-Ag composite membranes after annealing at various temperatures,” Journal of Membrane Science, vol. 369, no. 1-2, pp. 267–276, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. S.-K. Ryi, J.-S. Park, K.-R. Hwang, C.-B. Lee, and S.-W. Lee, “Module configuration in CO2 capture using Pd-based composite membranes,” International Journal of Hydrogen Energy, vol. 36, no. 21, pp. 13769–13775, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. S.-K. Ryi, J.-S. Park, S.-H. Kim, S.-H. Cho, J.-S. Park, and D.-W. Kim, “Development of a new porous metal support of metallic dense membrane for hydrogen separation,” Journal of Membrane Science, vol. 279, no. 1-2, pp. 439–445, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Tong, H. Suda, K. Haraya, and Y. Matsumura, “A novel method for the preparation of thin dense Pd membrane on macroporous stainless steel tube filter,” Journal of Membrane Science, vol. 260, no. 1-2, pp. 10–18, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. Y.-H. Chi, P.-S. Yen, M.-S. Jeng, S.-T. Ko, and T.-C. Lee, “Preparation of thin Pd membrane on porous stainless steel tubes modified by a two-step method,” International Journal of Hydrogen Energy, vol. 35, no. 12, pp. 6303–6310, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. D.-W. Kim, Y. J. Park, J.-W. Moon, S.-K. Ryi, and J.-S. Park, “The effect of Cu reflow on the Pd-Cu-Ni ternary alloy membrane fabrication for infinite hydrogen separation,” Thin Solid Films, vol. 516, no. 10, pp. 3036–3044, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. S.-K. Ryi, J.-S. Park, S.-H. Kim, D.-W. Kim, and K.-I. Cho, “Formation of a defect-free Pd-Cu-Ni ternary alloy membrane on a polished porous nickel support (PNS),” Journal of Membrane Science, vol. 318, no. 1-2, pp. 346–354, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. S.-K. Ryi, N. Xu, A. Li, C. J. Lim, and J. R. Grace, “Electroless Pd membrane deposition on alumina modified porous Hastelloy substrate with EDTA-free bath,” International Journal of Hydrogen Energy, vol. 35, no. 6, pp. 2328–2335, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. S.-K. Ryi, J.-S. Park, K.-R. Hwang, C.-B. Lee, and S.-W. Lee, “Repair of Pd-based composite membrane by polishing treatment,” International Journal of Hydrogen Energy, vol. 36, no. 21, pp. 13776–13780, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. D. J. Edlund and J. McCarthy, “The relationship between intermetallic diffusion and flux decline in composite-metal membranes: implications for achieving long membrane lifetime,” Journal of Membrane Science, vol. 107, no. 1-2, pp. 147–153, 1995. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Li, A. Goldbach, W. Li, and H. Xu, “PdC formation in ultra-thin Pd membranes during separation of H2/CO mixtures,” Journal of Membrane Science, vol. 299, no. 1-2, pp. 130–137, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. S.-K. Ryi, S.-W. Lee, D.-K. Oh et al., “Electroless plating of Pd after shielding the bottom of planar porous stainless steel for a highly stable hydrogen selective membrane,” Journal of Membrane Science, vol. 467, pp. 93–99, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. S.-K. Ryi, J.-S. Park, S.-H. Kim, S.-H. Cho, D.-W. Kim, and K.-Y. Um, “Characterization of Pd-Cu-Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow on porous nickel support for hydrogen separation,” Separation and Purification Technology, vol. 50, no. 1, pp. 82–91, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. S.-K. Ryi, J.-S. Park, S.-H. Kim et al., “A new membrane module design with disc geometry for the separation of hydrogen using Pd alloy membranes,” Journal of Membrane Science, vol. 297, no. 1-2, pp. 217–225, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. W. M. Tucho, H. J. Venvik, M. Stange, J. C. Walmsley, R. Holmestad, and R. Bredesen, “Effects of thermal activation on hydrogen permeation properties of thin, self-supported Pd/Ag membranes,” Separation and Purification Technology, vol. 68, no. 3, pp. 403–410, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. W. Hume-Rothery, Elements of Structural Metallurgy, Institute of Metals, London, UK, 1961.
  23. A.-P. Tsai, “A test of Hume-Rothery rules for stable quasicrystals,” Journal of Non-Crystalline Solids, vol. 334-335, pp. 317–322, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. H. Baker, Ed., ASM Handbook Volume 3: Binary Alloy Phase Diagram, ASM International, Materials Park, Ohio, USA, 1999.
  25. F. A. Lewis, “Hydrogen in palladium and palladium alloys,” International Journal of Hydrogen Energy, vol. 21, no. 6, pp. 461–464, 1996. View at Publisher · View at Google Scholar · View at Scopus
  26. S.-K. Ryi, J.-S. Park, S.-H. Kim, D.-W. Kim, and J.-W. Moon, “Long-term hydrogen permeation tests of Pd-Cu-Ni/PNS with temperature cycles from room temperature to 773 K,” Journal of Membrane Science, vol. 306, no. 1-2, pp. 261–266, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. S.-K. Ryi, J.-S. Park, S.-H. Kim, D.-W. Kim, B.-I. Woo, and J. R. Grace, “Development of a hydrogen purifier with Pd-based composite membrane,” Korean Journal of Chemical Engineering, vol. 27, no. 1, pp. 235–240, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. S.-K. Ryi, J.-S. Park, S.-H. Kim, D.-W. Kim, and H.-K. Kim, “Low temperature diffusion bonding of Pd-based composite membranes with metallic module for hydrogen separation,” Journal of Membrane Science, vol. 326, no. 2, pp. 589–594, 2009. View at Publisher · View at Google Scholar · View at Scopus