Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 485267, 13 pages
http://dx.doi.org/10.1155/2014/485267
Research Article

Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill

1Centre of Advanced Manufacturing and Material Processing, Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
2Institute of Product Design and Manufacturing, Universiti Kuala Lumpur, Cheras, 56100 Kuala Lumpur, Malaysia
3Department of Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut 71516, Egypt

Received 2 April 2014; Accepted 6 August 2014; Published 27 August 2014

Academic Editor: Haiming Lu

Copyright © 2014 N. Masmiati et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Hatna, “Automatic CNC milling of pockets: geometric and technological issues,” Computer Integrated Manufacturing Systems, vol. 11, no. 4, pp. 309–330, 1998. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. Lee and T. Chang, “Application of computational geometry in optimizing 2.5D and 3D NC surface machining,” Computers in Industry, vol. 26, no. 1, pp. 41–59, 1995. View at Publisher · View at Google Scholar · View at Scopus
  3. P. E. Romero, R. Dorado, F. A. Díaz, and E. M. Rubio, “Influence of pocket geometry and tool path strategy in pocketmilling of UNS A96063 alloy,” Procedia Engineering, vol. 63, pp. 523–531, 2013. View at Google Scholar
  4. C. Gologlu and N. Sakarya, “The effects of cutter path strategies on surface roughness of pocket milling of 1.2738 steel based on Taguchi method,” Journal of Materials Processing Technology, vol. 206, no. 1–3, pp. 7–15, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. S. K. Gupta, S. K. Saini, B. W. Spranklin, and Z. Yao, “Geometric algorithms for computing cutter engagement functions in 2.5D milling operations,” Computer Aided Design, vol. 37, no. 14, pp. 1469–1480, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Veeramani and Y. Gau, “Selection of an optimal set of cutting-tool sizes for 2 1/2D pocket machining,” CAD Computer Aided Design, vol. 29, no. 12, pp. 869–877, 1997. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Hamdan, A. A. D. Sarhan, and M. Hamdi, “An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish,” The International Journal of Advanced Manufacturing Technology, vol. 58, no. 1–4, pp. 81–91, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Sayuti, A. A. D. Sarhan, M. Fadzil, and M. Hamdi, “Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool—Taguchi approach,” International Journal of Advanced Manufacturing Technology, vol. 60, no. 9-12, pp. 939–950, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Hood, D. K. Aspinwall, S. L. Soo, A. L. Mantle, and D. Novovic, “Workpiece surface integrity when slot milling γ-TiAl intermetallic alloy,” CIRP Annals. Manufacturing Technology, vol. 63, pp. 53–56, 2014. View at Google Scholar
  10. K. Moussaoui, M. Mousseigne, J. Senatore, R. Chieragatti, and F. Monies, “Influence of milling on surface integrity of Ti6Al4V-study of the metallurgical characteristics: microstructure and microhardness,” International Journal of Advanced Manufacturing Technology, vol. 67, no. 5–8, pp. 1477–1489, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. W. Li, Y. B. Guo, M. E. Barkey, and J. B. Jordon, “Effect tool wear during end milling on the surface integrity and fatigue life of Inconel 718,” Procedia CIRP, vol. 14, pp. 546–551, 2014. View at Google Scholar
  12. J. Sun and Y. B. Guo, “A comprehensive experimental study on surface integrity by end milling Ti-6Al-4V,” Journal of Materials Processing Technology, vol. 209, no. 8, pp. 4036–4042, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. P. J. Withers and H. K. D. H. Bhadeshia, “Residual stress part 1—measurement techniques,” Materials Science and Technology, vol. 17, no. 4, pp. 355–365, 2001. View at Google Scholar · View at Scopus
  14. J. E. Wyatt and J. T. Berry, “A new technique for the determination of superficial residual stresses associated with machining and other manufacturing processes,” Journal of Materials Processing Technology, vol. 171, no. 1, pp. 132–140, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. P. Chevrier, A. Tidu, B. Bolle, P. Cezard, and J. P. Tinnes, “Investigation of surface integrity in high speed end milling of a low alloyed steel,” International Journal of Machine Tools and Manufacture, vol. 43, no. 11, pp. 1135–1142, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Maurotto, D. Tsivoulas, and M. G. Burke, “Surface integrity in dry milling of 304L steel: a parametric study,” Procedia CIRP, vol. 13, pp. 156–162, 2014. View at Publisher · View at Google Scholar
  17. D. A. Axinte and R. C. Dewes, “Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models,” Journal of Materials Processing Technology, vol. 127, no. 3, pp. 325–335, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. N. Suresh Kumar Reddy, S. Kwang-Sup, and M. Yang, “Experimental study of surface integrity during end milling of Al/SiC particulate metal-matrix composites,” Journal of Materials Processing Technology, vol. 201, no. 1–3, pp. 574–579, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. E. O. Ezugwu, J. Bonney, R. B. da Silva, and O. Çakir, “Surface integrity of finished turned Ti-6Al-4V alloy with PCD tools using conventional and high pressure coolant supplies,” International Journal of Machine Tools and Manufacture, vol. 47, no. 6, pp. 884–891, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. A. Ginting and M. Nouari, “Surface integrity of dry machined titanium alloys,” International Journal of Machine Tools and Manufacture, vol. 49, no. 3-4, pp. 325–332, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. S. H. Park, Robust Design and Analysis for Quality Engineering, Chapman & Hall, 1996.
  22. R. Sreenivasulu, “Optimization of surface roughness and delamination damage ofGFRP composite material in end milling using Taguchi designmethod and artificial neural network,” Procedia Engineering, vol. 64, pp. 785–794, 2013. View at Publisher · View at Google Scholar
  23. T. Kıvak, “Optimization of surface roughness and flank wear using theTaguchi method in milling of Hadfield steel with PVD and CVDcoated inserts,” Measurement, vol. 50, pp. 19–28, 2014. View at Google Scholar
  24. P. S. Prevéy, “Research, X-ray diffraction residual stress techniques,” Metals Handbook, vol. 10, pp. 380–392, 1986. View at Google Scholar
  25. M. E. Fitzpatrick, A. T. Fry, P. Holdway, F. A. Kandil, J. Shackleton, and L. Suominen, “Determination of residual stresses by x-ray diffraction. issue 2,” Measurement Good Practice Guide, vol. 52, 2005. View at Google Scholar
  26. F. Gunnberg, M. Escursell, and M. Jacobson, “The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel,” Journal of Materials Processing Technology, vol. 174, no. 1–3, pp. 82–90, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. M. El-Gallab and M. Sklad, “Machining of Al/SiC particulate metal matrix composites. Part II. Workpiece surface integrity,” Journal of Materials Processing Technology, vol. 83, no. 1-3, pp. 277–285, 1998. View at Publisher · View at Google Scholar · View at Scopus