Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 582536, 12 pages
http://dx.doi.org/10.1155/2014/582536
Research Article

Numerical Analysis of the Energy Improvement of Plastering Mortars with Phase Change Materials

1Construction Technology, Quality and Management (GEQUALTEC), Faculdade de Engenharia da Universidade do Porto, Rua Dr. Roberto Frias s/n, 4200-465 Porto, Portugal
2Polytechnic Institute of Viseu-School of Technology & Management, Campus Politécnico de Repeses, 3504-510 Viseu, Portugal
3Laboratory of Building Physics (LFC), Civil Engineering Department, Faculdade de Engenharia da Universidade do Porto, Rua Dr. Roberto Frias s/n, 4200-465 Porto, Portugal

Received 28 February 2014; Accepted 13 March 2014; Published 10 April 2014

Academic Editor: A. G. Barbosa de Lima

Copyright © 2014 A. Váz Sá et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Ahadi, “Applications of nanomaterials in construction with an approach to energy issue,” Advanced Materials Research, vol. 261–263, pp. 509–514, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. A. V. Sá, M. Azenha, H. de Sousa, and A. Samagaio, “Thermal enhancement of plastering mortars with Phase Change Materials: experimental and numerical approach,” Energy and Buildings, vol. 49, pp. 16–27, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. P. C. Tabares-Velasco and B. Griffith, “Diagnostic test cases for verifying surface heat transfer algorithms and boundary conditions in building energy simulation programs,” Journal of Building Performance Simulation, vol. 5, pp. 329–346, 2011. View at Google Scholar
  4. P. C. Tabares-Velasco, C. Christensen, and M. Bianchi, “Verification and validation of EnergyPlus phase change material model for opaque wall assemblies,” Building and Environment, vol. 54, pp. 186–196, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. CEN, “EN 998-1: specification for mortar masonry. Part 1: rendering and plastering mortar,” CEN, (European Commitee for Stardardization), Brussels, Belgium, 2013.
  6. CEN, “EN 197-1: cement. Part 1: composition, specifications and conformity criteria for common cements,” CEN, (European Commitee for Stardardization), Brussels, Belgium, 2001.
  7. J. Dieckmann, “Latent heat storage in concrete,” 2008, http://www.eurosolar.org/new/pdfs_neu/Thermal/IRES2006_Dieckmann.pdf.
  8. D. W. Hawes, D. Feldman, and D. Banu, “Latent heat storage in building materials,” Energy and Buildings, vol. 20, no. 1, pp. 77–86, 1993. View at Google Scholar · View at Scopus
  9. D. Zhou, C. Y. Zhao, and Y. Tian, “Review on thermal energy storage with phase change materials (PCMs) in building applications,” Applied Energy, vol. 92, pp. 593–605, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Koschenz and B. Lehmann, “Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings,” Energy and Buildings, vol. 36, no. 6, pp. 567–578, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Lin, Y. Zhang, X. Xu, H. Di, R. Yang, and P. Qin, “Experimental study of under-floor electric heating system with shape-stabilized PCM plates,” Energy and Buildings, vol. 37, no. 3, pp. 215–220, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. L. F. Cabeza, C. Castellón, M. Nogués, M. Medrano, R. Leppers, and O. Zubillaga, “Use of microencapsulated PCM in concrete walls for energy savings,” Energy and Buildings, vol. 39, no. 2, pp. 113–119, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. D. Feldman, D. Banu, and D. W. Hawes, “Development and application of organic phase change mixtures in thermal storage gypsum wallboard,” Solar Energy Materials and Solar Cells, vol. 36, no. 2, pp. 147–157, 1995. View at Google Scholar · View at Scopus
  14. F. Kuznik, J. Virgone, and J.-J. Roux, “Energetic efficiency of room wall containing PCM wallboard: a full-scale experimental investigation,” Energy and Buildings, vol. 40, no. 2, pp. 148–156, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. C.-M. Lai, R. H. Chen, and C.-Y. Lin, “Heat transfer and thermal storage behaviour of gypsum boards incorporating micro-encapsulated PCM,” Energy and Buildings, vol. 42, no. 8, pp. 1259–1266, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Hasse, M. Grenet, A. Bontemps, R. Dendievel, and H. Sallée, “Realization, test and modelling of honeycomb wallboards containing a Phase Change Material,” Energy and Buildings, vol. 43, no. 1, pp. 232–238, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. A. K. Athienitis, C. Liu, D. Hawes, D. Banu, and D. Feldman, “Investigation of the thermal performance of a passive solar test-room with wall latent heat storage,” Building and Environment, vol. 32, no. 5, pp. 405–410, 1997. View at Google Scholar · View at Scopus
  18. BASF, BASF The Chemical Company, GmbH. Phase Change Material. Micronal PCM, 2010, http://www.micronal.de/portal/basf/ien/dt.jsp?setCursor=1_290798.
  19. CEN, “EN, 1015: methods of test for mortar for masonry,” vol. EN1015, CEN, (European Commitee for Stardardization), Brussels, Belgium, 2006.
  20. CEN, “EN, 1745: masonry and masonry products. Methods for determining design thermal values,” CEN, (European Commitee for Stardardization), Brussels, Belgium, 2002.
  21. ISO, “ISO, 8301: thermal insulation: determination of steady-state thermal resistance and related properties. Heat flow meter apparatus,” ISO, (International Organization for Standardization), Geneve, Switzerland, 1991.
  22. C. O. Pedersen, “Advanced zone simulation in EnergyPlus: incorporation of variable properties and phase change material (PCM) capability,” Building Simulation 2007, Beijing, China, 2007.
  23. EnergyPlus, EnergyPlus Engineering Reference: The Reference to EnergyPlus Calculations: Ernest Orlando Lawrence Berkeley National Laboratory, 2012.
  24. ASHRAE, “ASHRAE Standard 140-2007: Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs,” Atlanta, Ga, USA, 2007.
  25. ISO, “ISO, 7730: ergonomics of the thermal environment. Analytical determination and interpretationof thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria,” ISO, (International Organization for Standardization), Geneve, Switzerland, 2005.
  26. A. Castell, I. Martorell, M. Medrano, G. Pérez, and L. F. Cabeza, “Experimental study of using PCM in brick constructive solutions for passive cooling,” Energy and Buildings, vol. 42, no. 4, pp. 534–540, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. N. Soares, J. J. Costa, A. R. Gaspar, and P. Santos, “Review of passive PCM latent heat thermal energy storage systems towards buildings’energy efficiency,” Energy and Buildings, vol. 59, pp. 82–103, 2013. View at Publisher · View at Google Scholar