Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 601915, 10 pages
http://dx.doi.org/10.1155/2014/601915
Research Article

Compressive Behaviour of RC Column with Fibre Reinforced Concrete Confined by CFRP Strips

1Department of Civil Engineering, KLN College of Information Technology, Sivagangai, Tamil Nadu 630611, India
2Department of Civil Engineering, SACS MAVMM Engineering College, Madurai, Tamil Nadu 625301, India
3Department of Civil Engineering, Chungnam National University, Daejeon, Republic of Korea

Received 24 May 2014; Revised 17 September 2014; Accepted 23 September 2014; Published 13 October 2014

Academic Editor: Liyuan Sheng

Copyright © 2014 A. M. Vasumathi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. E. Barragán, R. Gettu, M. A. Martín, and R. L. Zerbino, “Uniaxial tension test for steel fibre reinforced concrete—a parametric study,” Cement and Concrete Composites, vol. 25, no. 7, pp. 767–777, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. M. K. Lee and B. I. G. Barr, “Strength and fracture properties of industrially prepared steel fibre reinforced concrete,” Cement and Concrete Composites, vol. 25, no. 3, pp. 321–332, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. A. R. Khaloo and M. Afshari, “Flexural behaviour of small steel fibre reinforced concrete slabs,” Cement and Concrete Composites, vol. 27, no. 1, pp. 141–149, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. L. G. Sorelli, A. Meda, and G. A. Plizzari, “Steel fiber concrete slabs on ground: a structural matter,” ACI Structural Journal, vol. 103, no. 4, pp. 551–558, 2006. View at Google Scholar · View at Scopus
  5. C. X. Qian and P. Stroeven, “Development of hybrid polypropylene-steel fibre-reinforced concrete,” Cement and Concrete Research, vol. 30, no. 1, pp. 63–69, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. R. S. Olivito and F. A. Zuccarello, “An experimental study on the tensile strength of steel fiber reinforced concrete,” Composites Part B: Engineering, vol. 41, no. 3, pp. 246–255, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. S. P. Yap, U. J. Alengaram, and M. Z. Jumaat, “Enhancement of mechanical properties in polypropylene- and nylon-fibre reinforced oil palm shell concrete,” Materials and Design, vol. 49, pp. 1034–1041, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Tapkin, “The effect of polypropylene fibers on asphalt performance,” Building and Environment, vol. 43, no. 6, pp. 1065–1071, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Mazaheripour, S. Ghanbarpour, S. H. Mirmoradi, and I. Hosseinpour, “The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete,” Construction and Building Materials, vol. 25, no. 1, pp. 351–358, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Ding, F. Zhang, F. Torgal, and Y. Zhang, “Shear behaviour of steel fibre reinforced self-consolidating concrete beams based on the modified compression field theory,” Composite Structures, vol. 94, no. 8, pp. 2440–2449, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Ferrara, P. Bamonte, A. Caverzan, A. Musa, and I. Sanal, “A comprehensive methodology to test the performance of steel fibre reinforced self-compacting concrete (SFR-SCC),” Construction and Building Materials, vol. 37, pp. 406–424, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Kakooei, H. M. Akil, M. Jamshidi, and J. Rouhi, “The effects of polypropylene fibers on the properties of reinforced concrete structures,” Construction and Building Materials, vol. 27, no. 1, pp. 73–77, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Michels, R. Christen, and D. Waldmann, “Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete,” Engineering Fracture Mechanics, vol. 98, no. 1, pp. 326–349, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. A. M. López-Buendía, M. D. Romero-Sánchez, V. Climent, and C. Guillem, “Surface treated polypropylene (PP) fibres for reinforced concrete,” Cement and Concrete Research, vol. 54, pp. 29–35, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. O. Kayali, M. Haque, and B. Zhu, “Some characteristics of high strength fiber reinforced lightweight aggregate concrete,” Cement & Concrete Composites, vol. 25, no. 2, pp. 207–213, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. Z. Peng and L. Qing-Fu, “Experiment and study on tensile strength of polypropylene fiber reinforced cement stabilized macadam,” Highway, 2008.
  17. L. Zhang, X. Wang, and G. Zheng, “Effect of polypropylene fibers on the strength and elastic modulus of soil-cement,” in Geosynthetics in Civil and Environmental Engineering, pp. 386–391, Springer, Berlin, Germany, 2009. View at Publisher · View at Google Scholar
  18. M. Demers and K. W. Neale, “Confinement of reinforced concrete columns with fibre-reinforced composite sheets—an experimental study,” Canadian Journal of Civil Engineering, vol. 26, no. 2, pp. 226–241, 1999. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Seible, M. J. N. Priestley, G. A. Hegender, and D. Innamorato, “Seismic retrofit of RC columns with continuous carbon fiber jackets,” Journal of Composites for Construction, vol. 1, no. 2, pp. 52–62, 1997. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Xiao and R. Ma, “Seismic retrofit of RC circular columns using prefabricated composite jacketing,” Journal of Structural Engineering, vol. 123, no. 10, pp. 1357–1364, 1997. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Mirmiran and M. Shahawy, “Behavior of concrete columns confined by fiber composites,” Journal of Structural Engineering, vol. 123, no. 5, pp. 583–590, 1997. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Toutanji and P. Balaguru, “Durability characteristics of concrete columns wrapped with FRP tow sheets,” Journal of Materials in Civil Engineering, vol. 10, no. 1, pp. 52–57, 1998. View at Publisher · View at Google Scholar · View at Scopus
  23. J. G. Teng and L. Lam, “Compressive behavior of CFRP-confined elliptical concrete columns,” Journal of Structural Engineering, vol. 128, no. 12, pp. 1535–1543, 2002. View at Publisher · View at Google Scholar
  24. M. Yaqub and C. G. Bailey, “Repair of fire damaged circular reinforced concrete columns with FRP composites,” Construction and Building Materials, vol. 25, no. 1, pp. 359–370, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Punurai, C.-T. T. Hsu, S. Punurai, and J. Chen, “Biaxially loaded RC slender columns strengthened by CFRP composite fabrics,” Engineering Structures, vol. 46, pp. 311–321, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. N. A. Siddiqui, S. H. Alsayed, Y. A. Al- Salloum, R. A. Iqbal, and H. Abbas, “Experimental investigation of slender circular RC columns strengthened with FRP composites,” Construction and Building Materials, vol. 69, pp. 323–334, 2014. View at Google Scholar
  27. T. Vincent and T. Ozbakkaloglu, “Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete,” Construction and Building Materials, vol. 47, pp. 814–826, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. T. Vincent and T. Ozbakkaloglu, “Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high- and ultra high-strength concrete,” Composites Part B: Engineering, vol. 50, pp. 413–428, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. G. Wu, Z. S. Wu, and Z. T. Lü, “Design-oriented stress-strain model for concrete prisms confined with FRP composites,” Construction and Building Materials, vol. 21, no. 5, pp. 1107–1121, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Kusumawardaningsih and M. N. S. Hadi, “Comparative behaviour of hollow columns confined with FRP composites,” Composite Structures, vol. 93, no. 1, pp. 198–205, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. T. Ozbakkaloglu and J. C. Lim, “Axial compressive behavior of FRP-confined concrete: experimental test database and a new design-oriented model,” Composites Part B: Engineering, vol. 55, pp. 607–634, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. T. M. Pham, L. V. Doan, and M. N. S. Hadi, “Strengthening square reinforced concrete columns by circularisation and FRP confinement,” Construction and Building Materials, vol. 49, pp. 490–499, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. B. Hu, J.-G. Wang, and G.-Q. Li, “Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading,” Construction and Building Materials, vol. 25, no. 5, pp. 2751–2763, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. G. P. Lignola, F. Nardone, A. Prota, and G. Manfredi, “Analytical model for the effective strain in FRP-wrapped circular RC columns,” Composites Part B, vol. 43, no. 8, pp. 3208–3218, 2012. View at Publisher · View at Google Scholar · View at Scopus
  35. X. Zhao, X.-J. He, S. Yan, and N. P. Anh, “Computational and simulation analysis of pull-out fiber reinforced concrete,” Advances in Materials Science and Engineering, vol. 2014, Article ID 576052, 7 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. IS8112:2013, Ordinary Portland Cement, 43 Grade—Specification, Bureau of Indian Standards, New Delhi, India, 2013.
  37. IS 2386(Part 1), Methods of Test for Aggregates for Concrete: Part 1 Particle Size and Shape, Bureau of Indian Standards, New Delhi, India, 1963.
  38. IS 2386-3, Methods of Test for Aggregates for Concrete: Part 3 Specific Gravity, Density, Voids, Absorption and Bulking, Bureau of Indian Standards, New Delhi, India, 1963.
  39. Bureau of Indian Standards, “Guidelines for concrete mix proportioning,” IS 10262:2009, Bureau of Indian Standards, New Delhi, India, 2009. View at Google Scholar
  40. T. W. Park, U. J. Na, L. Chung, and M. Q. Feng, “Compressive behavior of concrete cylinders confined by narrow strips of CFRP with spacing,” Composites Part B: Engineering, vol. 39, no. 7-8, pp. 1093–1103, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. H. Bouchelaghem, A. Bezazi, and F. Scarpa, “Compressive behaviour of concrete cylindrical FRP-confined columns subjected to a new sequential loading technique,” Composites Part B: Engineering, vol. 42, no. 7, pp. 1987–1993, 2011. View at Publisher · View at Google Scholar · View at Scopus