Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 683579, 10 pages
http://dx.doi.org/10.1155/2014/683579
Research Article

Phytoremediation Potential of Vetiver System Technology for Improving the Quality of Palm Oil Mill Effluent

1Department of Chemical and Environmental Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43300 Serdang, Selangor, Malaysia
2The Vetiver Network International, Asia and Oceania, Brisbane 4069, Australia
3Malaysian Palm Oil Board (MPOB), Agro Product Unit, Engineering and Processing Division, Jalan Sekolah, Pekan Bangi Lama, 43000 Kajang, Selangor, Malaysia
4Department of Land Management, Faculty of Agriculture, Universiti Putra Malaysia, 43300 Serdang, Selangor, Malaysia
5Department of Biological and Agricultural Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43300 Serdang, Selangor, Malaysia

Received 3 October 2014; Revised 19 November 2014; Accepted 20 November 2014; Published 11 December 2014

Academic Editor: Steven L. Suib

Copyright © 2014 Negisa Darajeh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Negisa Darajeh, Azni Idris, Paul Truong, Astimar Abdul Aziz, Rosenani Abu Bakar, and Hasfalina Che Man, “Phytoremediation Potential of Vetiver System Technology for Improving the Quality of Palm Oil Mill Effluent,” Advances in Materials Science and Engineering, vol. 2014, Article ID 683579, 10 pages, 2014. doi:10.1155/2014/683579