Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 706986, 7 pages
http://dx.doi.org/10.1155/2014/706986
Research Article

Study on Strength and Ultrasonic Velocity of Air-Entrained Concrete and Plain Concrete in Cold Environment

1School of Civil Engineering, Qingdao Technological University, Qingdao 266033, China
2State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072, China
3School of Civil Engineering, Dalian University of Technology, Dalian 116023, China

Received 11 November 2013; Accepted 2 January 2014; Published 10 February 2014

Academic Editor: Konstantinos I. Tserpes

Copyright © 2014 Huai-shuai Shang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Kosior-Kazberuk and W. Jezierski, “Surface scaling resistance of concrete modified with bituminous addition,” Journal of Civil Engineering and Management, vol. 10, no. 1, pp. 25–30, 2004. View at Google Scholar · View at Scopus
  2. European Committee for Standardization, “Tests for mechanical and physical properties of aggregates—part 2: methods for the determination of resistance to fragmentation,” EN 1097-2., p. 38, 2010.
  3. H.-S. Shang and T.-H. Yi, “Freeze-thaw durability of air-entrained concrete,” The Scientific World Journal, vol. 2013, Article ID 650791, 6 pages, 2013. View at Publisher · View at Google Scholar
  4. D. Jozwiak-Niedzwiedzka, “Scaling resistance of high performance concretes containing a small portion of pre-wetted lightweight fine aggregate,” Cement and Concrete Composites, vol. 27, no. 6, pp. 709–715, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Marks, D. Jóźwiak-Niedźwiedzka, M. A. Glinicki et al., “Assessment of scaling durability of concrete with CFBC ash by automatic classification rules,” Journal of Materials Civil Engineering, vol. 24, no. 7, pp. 860–867, 2012. View at Google Scholar
  6. H.-S. Shang, T.-H. Yi, and Y.-P. Song, “Behavior of plain concrete of a high water-cement ratio after freeze-thaw cycles,” Materials, vol. 5, pp. 1698–1707, 2012. View at Google Scholar
  7. H. Binici, T. Shah, O. Aksogan, and H. Kaplan, “Durability of concrete made with granite and marble as recycle aggregates,” Journal of Materials Processing Technology, vol. 208, no. 1–3, pp. 299–308, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Liu, G. Ye, E. Schlangen et al., “Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing,” Cement and Concrete Composites, vol. 33, no. 5, pp. 562–571, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. L. Du and K. J. Folliard, “Mechanisms of air entrainment in concrete,” Cement and Concrete Research, vol. 35, no. 8, pp. 1463–1471, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Chatterji, “Freezing of air-entrained cement-based materials and specific actions of air-entraining agents,” Cement and Concrete Composites, vol. 25, no. 7, pp. 759–765, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. K. H. Khayat and J. Assaad, “Air-void stability in self-consolidating concrete,” ACI Materials Journal, vol. 99, no. 4, pp. 408–416, 2002. View at Google Scholar · View at Scopus
  12. A. Gokce, S. Nagataki, T. Saeki, and M. Hisada, “Freezing and thawing resistance of air-entrained concrete incorporating recycled coarse aggregate: the role of air content in demolished concrete,” Cement and Concrete Research, vol. 34, no. 5, pp. 799–806, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Łaźniewska-Piekarczyk, “The frost resistance versus air voids parameters of high performance self compacting concrete modified by non-air-entrained admixtures,” Construction and Building Materials, vol. 48, pp. 1209–1220, 2013. View at Google Scholar
  14. M. I. Khan, “Evaluation of non-destructive testing of high strength concrete incorporating supplementary cementitious composites,” Resources, Conservation and Recycling, vol. 61, pp. 125–129, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. A. AnaIvanović and R. D. Neilson, “Non-destructive testing of rock bolts for estimating total bolt length,” International Journal of Rock Mechanics & Mining Sciences, vol. 64, pp. 36–43, 2013. View at Google Scholar
  16. E. H. Saenger, G. K. Kocur, R. Jud, and M. Torrilhon, “Application of time reverse modeling on ultrasonic non-destructive testing of concrete,” Applied Mathematical Modelling, vol. 35, no. 2, pp. 807–816, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. A. A. Shah and Y. Ribakov, “Non-destructive measurements of crack assessment and defect detection in concrete structures,” Materials & Design, vol. 29, no. 1, pp. 61–69, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. A. A. Shah and Y. Ribakov, “Non-destructive evaluation of concrete in damaged and undamaged states,” Materials & Design, vol. 30, no. 9, pp. 3504–3511, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. J. D. Stauffer, C. B. Woodward, and K. R. White, “Nonlinear ultrasonic testing with resonant and pulse velocity parameters for early damage in concrete,” ACI Materials Journal, vol. 102, no. 2, pp. 118–121, 2005. View at Google Scholar · View at Scopus
  20. National Standard of the People’s Republic of China, “The test method of long-term and durability on ordinary concrete,” Tech. Rep. GB/T50082-2009, National Standard of the People’s Republic of China, Beijing, China, 2009. View at Google Scholar
  21. National Standard of the People’s Republic of China, “Portland cement and ordinary portland cement,” Tech. Rep. GB175-99, National Standard of the People’s Republic of China, Beijing, China, 1999. View at Google Scholar
  22. L.-K. Qin, Y.-P. Song, Y.-J. Wang, C.-J. Yu, and Z. Zhang, Influence of Cycles of Freezing and Thawing on the Compressive Property of Concrete in Seawater,” Concrete, pp. 16–18, 2004.
  23. H.-S. Shang, Y.-P. Song, and J.-P. Ou, “Mechanical behaviour of air-entrained concrete,” Magazine of Concrete Research, vol. 61, no. 2, pp. 87–94, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. National Standard of the People’s Republic of China, “Testing code of concrete for port and waterwog engineering,” Tech. Rep. JTJ 270-98, National Standard of the People’s Republic of China, Beijing, China, 1998. View at Google Scholar
  25. H.-Q. Cheng, L.-S. Zhang, and P.-X. Li, “The influence of freez-thaw to concrete strength,” Henan Science, vol. 61, no. 2, pp. 214–216, 2003. View at Google Scholar
  26. H. Marzouk and D. Jiang, “Effects of freezing and thawing on the tension properties of high-strength concrete,” ACI Materials Journal, vol. 91, no. 6, pp. 577–586, 1994. View at Google Scholar · View at Scopus
  27. L.-K. Qin, Study on the strength and deformation of concrete under multiaxial stress after high-temperature of freez-thaw cycling [Ph.D. thesis], Dalian University of Technology, Liaoning, China, 2003.